Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve 1200277

This site contains about 138,282 documents.

View by:

Page: 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,450 1,460 1,470 1,480 1,490 1,500 1,510 1,520 1,530 1,538 1,539 1,540 1,541 1,542 1,543 1,544 1,545 1,546 1,547 1,548 1,549 1,550 1,551 1,552 1,553 1,554 1,555 1,556 1,557 1,558 1,559 1,560 1,561 1,562 1,563 1,564 1,565 1,566 1,567 1,570 1,580 1,590 1,600 1,610 1,620 1,630 1,640 1,650 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$319.95 Exhaust: Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12001G
Manufacturer: Vance & Hines
Dennis Kirk Part #: 25429
Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler: Manufacturer part # 12001G - These brilliantly chrome finished, high-performance exhaust systems are the perfect complement for many early superbikes and standard style bikes. Internally coated to keep the chrome gleaming for years. Power-Flo replaceable, re-packable baffle for performance that meets noise standards. Megaphone-style muffler section with tuned length headpipes. Cornering clearance is improved, and oil filter/drain plug access is retained. Carburetor re-jetting recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12001G
1 on hand

More Info/Options for Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12001G

$199.95 Exhaust: Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler 12001P
Manufacturer: Vance & Hines
Dennis Kirk Part #: 25431
Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler: Manufacturer part # 12001P - A system built for the all-out horsepower gains demanded by the weekend Bracket racer. Not legal for street use -- low megaphone design is for drag racing only. Gleaming chrome finish. Straight-through, no baffle design for maximum exhaust flow (not EPA approved). Not a quick change exhaust system. Reaches peak performance with minor engine mods and carb re-jetting; instructions included. All systems also require chassis modifications, , NOTE: This pipe is for drag racing only, does not have a baffle or a baffle available for it, has insufficient ground clearence for street use and requires modification to the footpeg, brake pedal, and chassis, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12001P
2 on hand

More Info/Options for Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler 12001P

$522.99 Exhaust: Yoshimura RS-5 Slip-On Muffler with Carbon Fiber Muffler Sleeve 1200272
Manufacturer: Yoshimura
Dennis Kirk Part #: 440068
Yoshimura RS-5 Slip-On Muffler with Carbon Fiber Muffler Sleeve: Manufacturer part # 1200272 - Yoshimura's most cutting-edge exhaust design. Carbon fiber slip-on design. RS-5 systems and slip-ons are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish. NOTE: This slip-on will have a carbon fiber muffler end cone Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1200272
1 on hand

More Info/Options for Yoshimura RS-5 Slip-On Muffler with Carbon Fiber Muffler Sleeve 1200272

$408.99 Exhaust: Yoshimura RS-5 Slip-On Muffler with Stainless Steel Muffler Sleeve 1200275
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401314
Yoshimura RS-5 Slip-On Muffler with Stainless Steel Muffler Sleeve: Manufacturer part # 1200275 - Yoshimura's most cutting-edge exhaust design. RS-5 slip-ons are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. Stainless steel slip-on design. Includes: tailpipe, muffler, hardware and instructions Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1200275
1 on hand

More Info/Options for Yoshimura RS-5 Slip-On Muffler with Stainless Steel Muffler Sleeve 1200275

$474.99 Exhaust: Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve 1200277
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401315
Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve: Manufacturer part # 1200277 - Yoshimura's most cutting-edge exhaust design. RS-5 slip-ons are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end cap. Titanium slip-on design. Includes: tailpipe, muffler, hardware and instructions Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1200277
2 on hand

More Info/Options for Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve 1200277

$199.95 Exhaust: Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler 12002P
Manufacturer: Vance & Hines
Dennis Kirk Part #: 440557
Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler: Manufacturer part # 12002P - A system built for the all-out horsepower gains demanded by the weekend Bracket racer. Not legal for street use -- low megaphone design is for drag racing only. Gleaming chrome finish. Straight-through, no baffle design for maximum exhaust flow (not EPA approved). Not a quick change exhaust system. Reaches peak performance with minor engine mods and carb re-jetting; instructions included. All systems also require chassis modifications, , NOTE: This pipe is for drag racing only, does not have a baffle or a baffle available for it, has insufficient ground clearence for street use and requires modification to the footpeg, brake pedal, and chassis, , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 12002P
2 on hand

More Info/Options for Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler 12002P

$299.95 Exhaust: Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12005
Manufacturer: Vance & Hines
Dennis Kirk Part #: 25438
Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler: Manufacturer part # 12005 - These brilliantly chrome finished, high-performance exhaust systems are the perfect complement for many early superbikes and standard style bikes. Internally coated to keep the chrome gleaming for years. Power-Flo replaceable, re-packable baffle for performance that meets noise standards. Megaphone-style muffler section with tuned length headpipes. Cornering clearance is improved, and oil filter/drain plug access is retained. Carburetor re-jetting recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12005
2 on hand

More Info/Options for Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12005

$309.95 Exhaust: Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12009
Manufacturer: Vance & Hines
Dennis Kirk Part #: 25440
Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler: Manufacturer part # 12009 - These brilliantly chrome finished, high-performance exhaust systems are the perfect complement for many early superbikes and standard style bikes. Internally coated to keep the chrome gleaming for years. Power-Flo replaceable, re-packable baffle for performance that meets noise standards. Megaphone-style muffler section with tuned length headpipes. Cornering clearance is improved, and oil filter/drain plug access is retained. Carburetor re-jetting recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12009
1 on hand

More Info/Options for Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12009

$25.95 Exhaust: Moose Silencer Repack Cartridges for OEM Silencer 12026
Manufacturer: Moose
Dennis Kirk Part #: 432411
Moose Silencer Repack Cartridges for OEM Silencer: Manufacturer part # 12026 - Slip-on one-piece cartridges offer the latest in muffler-packing technology. Install in half the time. Last 5-10 times longer and reduce weight 25% compared to stock packing. Carbon-coated outer casing remains intact for removal of used cartridge.. 12026
3 on hand

More Info/Options for Moose Silencer Repack Cartridges for OEM Silencer 12026

Exhaust: Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 12029

$289.95 Exhaust: Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 12029
Manufacturer: Vance & Hines
Dennis Kirk Part #: 441349
Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 12029 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12029
Expected Soon

More Info/Options for Vance & Hines 2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve 12029

$276.99 Exhaust: Sito Chrome Megaphone Style 4 into 2 Slip-On Mufflers 1204
Manufacturer: Sito
Dennis Kirk Part #: 4401032
Sito Chrome Megaphone Style 4 into 2 Slip-On Mufflers: Manufacturer part # 1204 - Replacement chrome megaphone style dual slip-on muffler with high-quality sheet-steel construction. Robot-cut and -welded for extremely tight quality control. Design features Twin Chamber internal silencer so silencer is independent of muffler sleeve. Melamine-coated muffler body internals to protect against corrosion. Sito muffler finishes are applied in-house using high-tech plating shop to ensure quality and lasting good looks. Mufflers install to OEM headers, , NOTE: Crossover pipe 44-01046 and cutting are required for installation. Includes chrome megaphone style mufflers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1204
1 on hand

More Info/Options for Sito Chrome Megaphone Style 4 into 2 Slip-On Mufflers 1204

CLOSEOUT!
Was: $1351.99
Now: $946.39
Exhaust: Titanium TI Force Exhaust System with Polished Canister 12051
Manufacturer: TI Force
Dennis Kirk Part #: 449879
Titanium TI Force Exhaust System with Polished Canister: Manufacturer part # 12051 - High-quality, high-performance exhuast sytems. Provide consistent horsepower and torque gains. Canisters have a straight-through baffle core producing a deep growl at the bottom end and a heart-skipping scream at the peak, much like a MotoGP bike. High-performance tapered headpipes and titanium oval mufflers that are unrivaled in looks and performance. Offer superior weight savings; overall weight just over 9 lbs.. Made of .040" titanium tubing. May require fairing modifications NOTE: Titanium racing exhaust works best with modified engines that require large headers and more exhaust flow, offering unbelievable peak power NOTE: This item ships 3-4 business days after order is placed. Included Items: , (1) Flange Assembly, (1) Front Pipe, (1) Middle Pipe, (1) Rear Bank Pipe, (1) Right Tail Pipe, (1) Left Tail Pipe, (1) Left Silencer, (1) Right Silencer, (1) Left Silencer Stay, (1) Right Silencer Stay, (4) Tandem Spacers, (2) Silencer Rubber Bands, (2) Silencer Bands, (1) Left-Side Silencer Spacer, (8) Springs, (1) Indicator Kit, (4) M8 x 95mm bolts, (3) M8 Washer, (2) M8 x 20mm bolts, (1) M8 x 30mm bolt, (1) M8 Lock Nut, (1) Clamp Band. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 12051
1 on hand

More Info/Options for Titanium TI Force Exhaust System with Polished Canister 12051

CLEARANCE!
Was: $254.99
Now: $191.24
Exhaust: Sito Chrome Tapered Tip Style Dual Slip-On Mufflers 1208
Manufacturer: Sito
Dennis Kirk Part #: 4401017
Sito Chrome Tapered Tip Style Dual Slip-On Mufflers: Manufacturer part # 1208 - Replacement chrome tapered style dual slip-on mufflers with high-quality sheet-steel construction. Robot-cut and -welded for extremely tight quality control. Design features Twin Chamber internal silencer so silencer is independent of muffler sleeve. Melamine-coated muffler body internals to protect against corrosion. Sito muffler finishes are applied in-house using high-tech plating shop to ensure quality and lasting good looks. Mufflers install to OEM headers. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1208
3 on hand

More Info/Options for Sito Chrome Tapered Tip Style Dual Slip-On Mufflers 1208

$360.99 Exhaust: Yoshimura Tri-Oval Race (TRS) Slip-On Mufflers with Polished Stainless Steel Muffler Sleeves 1210265
Manufacturer: Yoshimura
Dennis Kirk Part #: 446863
Yoshimura Tri-Oval Race (TRS) Slip-On Mufflers with Polished Stainless Steel Muffler Sleeves: Manufacturer part # 1210265 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. Muffler is quick-release in polished stainless steel. Dual mufflers, , NOTE: , Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1210265
1 on hand

More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Mufflers with Polished Stainless Steel Muffler Sleeves 1210265