TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Thunderheader 2 into 1 High Performance Exhaust System 1017

$563.99 Exhaust: Thunderheader 2 into 1 High Performance Exhaust System 1017 Manufacturer: Thunderheader Dennis Kirk Part #: H44014 Thunderheader 2 into 1 High Performance Exhaust System: Manufacturer part # 1017 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25-033 9" mid rear; H25-037 8" top front; H25-029 13 1/2" collector H25-039 13 1/2" top rear.. For long style 23" top rear heat shield order, H25-034. For long style 14" top front heat shield order, H25-035. For models listed without floorboards , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 1017 2 on hand More Info/Options for Thunderheader 2 into 1 High Performance Exhaust System 1017

$99.00 Exhaust: Cobra Megaphone ATV Exhaust System 1017 Manufacturer: Cobra Dennis Kirk Part #: 44156 Cobra Megaphone ATV Exhaust System: Manufacturer part # 1017 - Tapered cone for excellent exhaust flow. High-performance louvered silencer. Reduces weight by approximately 50%. Uses stock mounting and hardware. Includes headpipe. Exhaust gaskets are not included but are recommended everytime a new system is installed; This system requires part# 26-1063.. 1017 4 on hand More Info/Options for Cobra Megaphone ATV Exhaust System 1017

$976.99 Exhaust: Muzzys High-Performance Single Muffler Exhaust System with Polished Megaphon Style Aluminum Muffler Sleeve 1017-00074 Manufacturer: Muzzys Dennis Kirk Part #: 4400839 Muzzys High-Performance Single Muffler Exhaust System with Polished Megaphon Style Aluminum Muffler Sleeve: Manufacturer part # 1017-00074 - High performance single muffler exhaust system. Exploit your engines full horsepower potential for the street or the track. Muzzys exhaust systems are proven performers, winning both AMA and World Superbike titles including back-to-back AMA Superbike Championships. Systems are rigorously engineered for exact fit and performance. All stainless steel pipes are hand bent and precision welded. With replaceable, re-packable baffles. Carburetor re-jetting is recommended for optimum performance-see jet kits. Megaphone style muffler Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1017-00074 2 on hand More Info/Options for Muzzys High-Performance Single Muffler Exhaust System with Polished Megaphon Style Aluminum Muffler Sleeve 1017-00074

$362.99 Exhaust: Muzzys High-Performance Slip-On with Round Polished Aluminum Muffler Sleeve 1017-00078 Manufacturer: Muzzys Dennis Kirk Part #: 4400477 Muzzys High-Performance Slip-On with Round Polished Aluminum Muffler Sleeve: Manufacturer part # 1017-00078 - Muzzys offers a slip-on muffler that utilizes the original headpipes. You get the advantages of lighter weight, more aggressive exhaust note and increased horsepower after a very simple installation. Stainless steel inlet pipe. , , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1017-00078 1 on hand More Info/Options for Muzzys High-Performance Slip-On with Round Polished Aluminum Muffler Sleeve 1017-00078

$561.99 Exhaust: Muzzys High-Performance Slip-On Muffler With Oval Carbon Fiber Muffler Sleeve 1017-00081 Manufacturer: Muzzys Dennis Kirk Part #: 4400479 Muzzys High-Performance Slip-On Muffler With Oval Carbon Fiber Muffler Sleeve : Manufacturer part # 1017-00081 - Muzzys offers a slip-on muffler that utilizes the original headpipes. You get the advantages of lighter weight, more aggressive exhaust note and increased horsepower after a very simple installation. Stainless steel inlet pipe INCLUDED ITEMS: , (1) Mid-pipe, (1) Muffler, (2) Attachment springs (titanium only), (1) Servo limiter, (2) Muzzy stickers, (1) Instruction sheet. . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1017-00081 1 on hand More Info/Options for Muzzys High-Performance Slip-On Muffler With Oval Carbon Fiber Muffler Sleeve 1017-00081

$563.99 Exhaust: Thunderheader 2 into 1 High Performance Exhaust System 1018 Manufacturer: Thunderheader Dennis Kirk Part #: H44015 Thunderheader 2 into 1 High Performance Exhaust System: Manufacturer part # 1018 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25-033 9" top front; H25-039 13 1/2" top rear; H25-029 13 1/2" collector. For models listed with floorboards or forward controls , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 1018 2 on hand More Info/Options for Thunderheader 2 into 1 High Performance Exhaust System 1018

CLEARANCE! Was: $563.99 Now: $422.99 Exhaust: Thunderheader 2-into-1 System for use with Floorboards or Forward Controls 1019 Manufacturer: Thunderheader Dennis Kirk Part #: H44016 Thunderheader 2-into-1 System for use with Floorboards or Forward Controls: Manufacturer part # 1019 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25-033 9" top front; H25-039 13 1/2" top rear; H25-029 13 1/2" collector. For models listed with forward controls, For models with center controls use part number H44-013. For models listed with floorboards or forward controls , , NOTE: Fits FXRP 1993-up models if oil filter is relocated. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. 1019 1 on hand More Info/Options for Thunderheader 2-into-1 System for use with Floorboards or Forward Controls 1019

$563.99 Exhaust: Thunderheader 2 into 1 High Performance Exhaust System 1020 Manufacturer: Thunderheader Dennis Kirk Part #: H44017 Thunderheader 2 into 1 High Performance Exhaust System: Manufacturer part # 1020 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25-028 14" top front; H25-027 26" top rear; H25-029 13 1/2" collector. For models listed without floorboards , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. 1020 2 on hand More Info/Options for Thunderheader 2 into 1 High Performance Exhaust System 1020

CLEARANCE! Was: $563.99 Now: $422.99 Exhaust: Thunderheader 2 into 1 High Performance Exhaust System 1022 Manufacturer: Thunderheader Dennis Kirk Part #: H44019 Thunderheader 2 into 1 High Performance Exhaust System: Manufacturer part # 1022 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25035 - 14 in. long style top front; H25034 - 23 in. long style top rear; H25029 - 13-1/2 in. collector. Bracket replaces Torque arm. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 1022 3 on hand More Info/Options for Thunderheader 2 into 1 High Performance Exhaust System 1022

$563.99 Exhaust: Thunderheader 2 into 1 High Performance Long Exhaust System 1024 Manufacturer: Thunderheader Dennis Kirk Part #: H44021 Thunderheader 2 into 1 High Performance Long Exhaust System: Manufacturer part # 1024 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25-014 22" top front; H25-013 16" top rear; H25-030 16" collector. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 1024 4 on hand More Info/Options for Thunderheader 2 into 1 High Performance Long Exhaust System 1024

$848.99 Exhaust: Thunderheader 2-into-1 Long-Style Dual Falsee System 1025 Manufacturer: Thunderheader Dennis Kirk Part #: H44022 Thunderheader 2-into-1 Long-Style Dual Falsee System: Manufacturer part # 1025 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25-014 22" top front; H25-013 16" top rear; H25-030 28" collector. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 1025 3 on hand More Info/Options for Thunderheader 2-into-1 Long-Style Dual Falsee System 1025

$99.00 Exhaust: Cobra Megaphone ATV Exhaust System 1025 Manufacturer: Cobra Dennis Kirk Part #: 44153 Cobra Megaphone ATV Exhaust System: Manufacturer part # 1025 - Tapered cone for excellent exhaust flow. High-performance louvered silencer. Reduces weight by approximately 50%. Uses stock mounting and hardware. Includes headpipe. Exhaust gaskets are not included but are recommended every time a new system is installed; This exhaust requires part# 26-1060.. 1025 3 on hand More Info/Options for Cobra Megaphone ATV Exhaust System 1025

$563.99 Exhaust: Thunderheader 2 into 1 High Performance Exhaust System 1026 Manufacturer: Thunderheader Dennis Kirk Part #: H44023 Thunderheader 2 into 1 High Performance Exhaust System: Manufacturer part # 1026 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25035, 14 in. long style top front; H25034, 23 in. long style top rear; H25029, 13-1/2 in. collector , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. 1026 3 on hand More Info/Options for Thunderheader 2 into 1 High Performance Exhaust System 1026

$99.00 Exhaust: Cobra Megaphone ATV Exhaust System 1026 Manufacturer: Cobra Dennis Kirk Part #: 44160 Cobra Megaphone ATV Exhaust System: Manufacturer part # 1026 - Tapered cone for excellent exhaust flow. High-performance louvered silencer. Reduces weight by approximately 50%. Uses stock mounting and hardware. Includes headpipe. , Exhaust gaskets are not included but are recommended every time a new system is installed: This system require part #26-1063.. 1026 Expected Soon More Info/Options for Cobra Megaphone ATV Exhaust System 1026

$123.00 Exhaust: Cobra Quiet Series Exhaust System 1026Q Manufacturer: Cobra Dennis Kirk Part