TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

CompuFire 90 amp, CompuFire 40 Amp 3-Phase Charging System 55560

$24.99 Electrical: Terry Components Starter Solenoid Repair Kit 550000 Manufacturer: Terry Components Dennis Kirk Part #: H20137 Terry Components Starter Solenoid Repair Kit: Manufacturer part # 550000 - Plunger assembly, contacts and spring included in kit. Fits 90-up Big Twin/Twin Cam model. Replaces OEM number 31604-91.. 550000 3 on hand More Info/Options for Terry Components Starter Solenoid Repair Kit 550000

$94.99 Electrical: Terry Components Starter Drive Clutch for 1.2 or 1.4 Starters 550100 Manufacturer: Terry Components Dennis Kirk Part #: H20135 Terry Components Starter Drive Clutch for 1.2 or 1.4 Starters: Manufacturer part # 550100 - Includes bearings and drive clutch. Available for high-performance or OEM starters. Fits 90-06 80 in. and 88 in. Big Twin and 90-07 XL starters (except 06 Dyna models). For 1.2 and 1.4 starters. Sold each.. 550100 2 on hand More Info/Options for Terry Components Starter Drive Clutch for 1.2 or 1.4 Starters 550100

$116.99 Electrical: Terry Components Starter Drive Clutch for 1.6 or 2.0 Starters 550110 Manufacturer: Terry Components Dennis Kirk Part #: H20136 Terry Components Starter Drive Clutch for 1.6 or 2.0 Starters: Manufacturer part # 550110 - Includes bearings and drive clutch. Available for high-performance or OEM starters. Fits 90-06 80 in. and 88 in. Big Twin and 90-07 XL starters (except 06 Dyna models). For 1.6 and 2.0 starters Sold each.. 550110 1 on hand More Info/Options for Terry Components Starter Drive Clutch for 1.6 or 2.0 Starters 550110

$245.99 Electrical: CompuFire 32 AMP Charging System Kit 55520 Manufacturer: CompuFire Dennis Kirk Part #: H21231 CompuFire 32 AMP Charging System Kit: Manufacturer part # 55520 - Stator, rotor and a black series-type regulator in a complete kit. Stator load and engine drag are reduced by series-type regulator. Rotor replaces OEM number 29957-81B; stator replaces OEM number 29970-88. , NOTE: Not for fuel injected models. 55520 3 on hand More Info/Options for CompuFire 32 AMP Charging System Kit 55520

$78.99 Electrical: CompuFire 32 AMP Stator 55530 Manufacturer: CompuFire Dennis Kirk Part #: H21232 CompuFire 32 AMP Stator: Manufacturer part # 55530 - Replacement 32 amp stator. Stator replaces OEM number 29970-88. , NOTE: Not for fuel injected models. 55530 1 on hand More Info/Options for CompuFire 32 AMP Stator 55530

$392.99 Electrical: CompuFire 40 Amp 3-Phase Charging System 55560 Manufacturer: CompuFire Dennis Kirk Part #: 201366 CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55560 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Vented rotor for enclosed Primary drive. Note: '96-'98 FLT models require regulator mount H49-633 .. 55560 3 on hand More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55560

$392.99 Electrical: CompuFire 40 Amp 3-Phase Charging System 55565 Manufacturer: CompuFire Dennis Kirk Part #: 201367 CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55565 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Vented rotor for closed Primary drive. Note: '03-'05 FLT models require regulator mount H49-633 .. 55565 1 on hand More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55565

$392.99 Electrical: CompuFire 40 Amp 3-Phase Charging System 55566 Manufacturer: CompuFire Dennis Kirk Part #: 201903 CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55566 - Fits listed models with a vented rotor and enclosed primary drive. Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Vented rotor for enclosed Primary drive. Note: '99-'02 FLT models require regulator mount H49-633 .. 55566 1 on hand More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55566

$392.99 Electrical: CompuFire 40 Amp 3-Phase Charging System 55570 Manufacturer: CompuFire Dennis Kirk Part #: 201368 CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55570 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced rotor. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Non-vented rotor for open Primary drive. Note: '96-'98 FLT models require regulator mount H49-633 .. 55570 2 on hand More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55570

$392.99 Electrical: CompuFire 40 Amp 3-Phase Charging System 55575 Manufacturer: CompuFire Dennis Kirk Part #: 201369 CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55575 - Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced rotor. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Non-vented rotor for open primary drive. Note: '03-'05 FLT models require regulator mount H49-633 .. 55575 1 on hand More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55575

$392.99 Electrical: CompuFire 40 Amp 3-Phase Charging System 55576 Manufacturer: CompuFire Dennis Kirk Part #: 201902 CompuFire 40 Amp 3-Phase Charging System: Manufacturer part # 55576 - Fits non-vented rotors with an open primary drive. Provide 25A at idle and 40A continuously above 2800 rpm. Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on in the stock location without any frame modifications. Precision-balanced non-vented rotor. Custom-designed flanged seal spacer provides maximum support for the rotor and voltage rotor output is calibrated to 14.25 V from idle on up. Ideal for fuel-injected engines and bikes with overdrive-type transmissions. Non-vented rotor for open primary drive. Note: '99-'02 FLT models require regulator mount H49-633 .. 55576 1 on hand More Info/Options for CompuFire 40 Amp 3-Phase Charging System 55576

$132.99 Electrical: CompuFire Replacement 38A Rotor 55645 Manufacturer: CompuFire Dennis Kirk Part #: H21675 CompuFire Replacement 38A Rotor : Manufacturer part # 55645 - Replacement Rotor for use with DK Part Number H21435.. 55645 1 on hand More Info/Options for CompuFire Replacement 38A Rotor 55645

$55.99 Electrical: Sumax Universal Thunderbolt 50 10.4mm Plug Wires 56081 Manufacturer: Sumax Dennis Kirk Part #: H20186 Sumax Universal Thunderbolt 50 10.4mm Plug Wires: Manufacturer part # 56081 - Unloads spark plugs for easier starts, smoother, stronger running and better gas mileage. Wires feature Ferrite Spiral Wound Coated cores, which are made of an exclusive copper/nickel alloy that is bonded by a conductive acrylic latex coating. Core resistance of 50 ohms/foot. Universal wires with standard boots are 24 in. long; standard 90 degree plug boots. Universal wires not for Twin Cam.. 56081 1 on hand More Info/Options for Sumax Universal Thunderbolt 50 10.4mm Plug Wires 56081

$55.99 Electrical: Sumax Universal Thunderbolt 50 10.4mm Plug Wires 56083 Manufacturer: Sumax Dennis Kirk Part #: H20187 Sumax Universal Thunderbolt 50 10.4mm Plug Wires: Manufacturer part # 56083 - Unloads spark plugs for easier starts, smoother, stronger running and better gas mileage. Wires feature Ferrite Spiral Wound Coated cores, which are made of an exclusive copper/nickel alloy that is bonded by a conductive acrylic latex coating. Core resistance of 50 ohms/foot. Universal wires with standard boots are 24 in. long; standard 135 degree plug boots. Universal wires not for Twin Cam.. 56083 1 on hand More Info/Options for Sumax Universal Thunderbolt 50 10.4mm Plug Wires 56083

$55.99 Electrical: Sumax Universal Thunderbolt 50 10.4mm Plug Wires 56085 Manufacturer: Sumax Dennis Kirk Part #: H20188 Sumax Universal Thunderbolt 50 10.4mm Plug Wires : Manufacturer part # 56085 - Unloads spark plugs for easier starts, smoother, stronger running and better gas mileage. Wires feature Ferrite Spiral Wound Coated cores, which are made of an exclusive copper/nickel alloy that is bonded by a conductive acrylic latex coating. Core resistance of 50 ohms/foot. Universal wires with standard boots are 24 in. long; standard 180 degree plug boots. Universal wires not for Twin Cam.. 56085 2 on hand More Info/Options for Sumax Universal Thunderbolt 50 10.4mm Plug Wires 56085

$55.99 Electrical: Sumax Universal Thunderbolt 50 10.4mm Plug Wires 58085 Manufacturer: Sumax Dennis Kirk Part #: H20189 Sumax Universal Thunderbolt 50 10.4mm Plug Wires: Manufacturer part # 58085 - Certified dyno tests showed a 2.1 horsepower increase when used in Twin Cam motors. Unloads spark plugs for easier starts, smoother, stronger running and better gas mileage. Wires feature Ferrite Spiral Wound Coated cores, which are made of an exclusive copper/nickel alloy that is bonded by a conductive acrylic latex coating. Core resistance of 50 ohms/foot. 36 in. long; 180 degree Pro Comp Boots; for water-cooled motors.. 58085 1 on hand More Info/Options for Sumax Universal Thunderbolt 50 10.4mm Plug Wires 58085

$516.99 Electrical: CompuFire 90 amp/1325 watt Charging System w/ Battery 58100 Manufacturer: CompuFire Dennis Kirk Part #: 210505 CompuFire 90 amp/1325 watt Charging System w/ Battery: Manufacturer part # 58100 - This system is designed to exceed new bike specs. The Compu-Fire charging system consists of the 90 amp/HD-1325 Alternator and a GEN III sealed maintenance free battery with 350 cold cranking amps and temperature-compensated voltage regulator. The alternator is the latest third Generation design featuring temperature compensated voltage regulation for optimum battery performance, matched voltage output for modern maintenance free batteries, and all components are brand new (NOT RE-MANUFACTURED). The Compu-Fire sealed battery is maintenance free, operates at an average of 0.5 to 0.75 volts higher than the original and provides 40 extra cold cranking amps. Starting is now crisper, ignition is stronger and lights are brighter. Riders can now operate high power accessories with complete peace of mind and eliminate carrying extra batteries. Made in the U.S.A.. NOTE: Not for use with OEM battery. Must use the sealed battery.. 58100 1 on hand More Info/Options for CompuFire 90 amp/1325 watt Charging System w/ Battery 58100

$422.99 Electrical: CompuFire 90 amp/1325 watt Charging System w/o Battery 58500 Manufacturer: CompuFire Dennis Kirk Part #: 210504 CompuFire 90 amp/1325 watt Charging System w/o Battery: Manufacturer part # 58500 - 90 amp/1325 watt charging system for GL1500. Cranks out the power necessary to run all those accessories. Includes all parts except the battery. Simple bolt-on installation for Honda GoldWing 89-00. Made in the U.S.A. will all new parts. NOTE: Not for use with OEM battery. Must use the GEN III battery or equivalent.. 58500 1 on hand More Info/Options for CompuFire 90 amp/1325 watt Charging System w/o Battery 58500