|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401666
Dennis Kirk Part #: 4401666
Caliber Ray Price Limited Edition Collector Series 4401666: Manufacturer part # C2-755 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-755
1 on Hand
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401666
|
|
|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401394
Dennis Kirk Part #: 4401394
Caliber Ray Price Limited Edition Collector Series 4401394: Manufacturer part # C-752 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-752
Expected Soon
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401394
|
|
|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401395
Dennis Kirk Part #: 4401395
Caliber Ray Price Limited Edition Collector Series 4401395: Manufacturer part # C-753 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-753
1 on Hand
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401395
|
|
|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401396
Dennis Kirk Part #: 4401396
Caliber Ray Price Limited Edition Collector Series 4401396: Manufacturer part # C-754 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-754
2 on Hand
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401396
|
|
|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401664
Dennis Kirk Part #: 4401664
Caliber Ray Price Limited Edition Collector Series 4401664: Manufacturer part # C2-752 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-752
1 on Hand
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401664
|
|
|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401397
Dennis Kirk Part #: 4401397
Caliber Ray Price Limited Edition Collector Series 4401397: Manufacturer part # C-755 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-755
1 on Hand
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401397
|
|
|
|
$598.99
Caliber Ray Price Limited Edition Collector Series 4401663
Dennis Kirk Part #: 4401663
Caliber Ray Price Limited Edition Collector Series 4401663: Manufacturer part # C2-751 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-751
1 on Hand
More Info/Options for Caliber Ray Price Limited Edition Collector Series 4401663
|
|
|
|
|
|
$946.99
H44095 Caliber True-Dual Exhaust System
Dennis Kirk Part #: H44095
H44095 Caliber True-Dual Exhaust System: Manufacturer part # FL-700 - The 4-step header design provides more than just good looks and great sound; it can boost power by as much as 25 percent. This system starts off at 1 3/4 in. at the port, then jumps to 1 7/8in., then 2 in. and finishes off in a 3 in. muffler. 3 in. mufflers feature engraved chrome billet end caps and two sets of patented, removable Varitech baffles (1 3/4 in. and 2 in. i.d.). Chrome 2 1/2 in. heat shields cover the entire header system and flow right into the mufflers for a smooth transition. Mounting hardware and instructions are included. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL-700
2 on Hand
More Info/Options for H44095 Caliber True-Dual Exhaust System
|
|
|
|
|
|
CLEARANCE!
Was: $667.99
Now: $500.99
Arlen Ness 2 1/4 in. Stepped Sling Shot Style Drag Pipes 4400203
Dennis Kirk Part #: 4400203
Arlen Ness 2 1/4 in. Stepped Sling Shot Style Drag Pipes 4400203: Manufacturer part # 05-733 - For Softail 86-06 and most custom rigid models. Pipes step from 1 3/4" to 2 1/4". Header pipe heat shields, louvered core baffles and mounting hardware are all included. , , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 05-733
1 on Hand
More Info/Options for Arlen Ness 2 1/4 in. Stepped Sling Shot Style Drag Pipes 4400203
|
|
|
|
$365.99
JIMS Flow Pro 1 Billet Oil Pump 149012
Dennis Kirk Part #: 149012
JIMS Flow Pro 1 Billet Oil Pump 149012: Manufacturer part # 1755B - Black with bottom feed/return oil lines. 6061 billet aluminum. Increased pump flow and return volume due to CNC-machined feed and return gears. Pump includes cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts. No provisions for primary or drive chain oiling. Made in the U.S.A.. NOTE: Check the thread size in the motor cases before mounting oil pump. NOTE: 73-80 models may require drilling -- use drilling jig PART NO. H14-252.. 1755B
1 on Hand
More Info/Options for JIMS Flow Pro 1 Billet Oil Pump 149012
|
|
|
|
|
|
|
|
|
|
$882.99
Yoshimura R-22 Stainless Bling Exhaust System 4402056
Dennis Kirk Part #: 4402056
Yoshimura R-22 Stainless Bling Exhaust System 4402056: Manufacturer part # 1120035 - Yoshimura's design makes power and added incredible styling. Highly polished stainless steel Tri-Oval exhaust muffler adds ground clearance and a touch of class. Polished Tri-Oval end cap features functional air vents that help dissipate hot muffler gasses for increased performance. Polished 304L stainless steel headers and mid-pipe. All fastener springs have protective heat shield sleeves with the Yoshimura logo proudly displayed.. 1120035
2 on Hand
More Info/Options for Yoshimura R-22 Stainless Bling Exhaust System 4402056
|
|
|
|
$948.99
Yoshimura R-22 Stainless Bling Exhaust System 4402851
Dennis Kirk Part #: 4402851
Yoshimura R-22 Stainless Bling Exhaust System 4402851: Manufacturer part # 1121035 - Yoshimura's design makes power and added incredible styling. Highly polished stainless steel Tri-Oval exhaust muffler adds ground clearance and a touch of class. Polished Tri-Oval end cap features functional air vents that help dissipate hot muffler gasses for increased performance. Polished 304L stainless steel headers and mid-pipe. All fastener springs have protective heat shield sleeves with the Yoshimura logo proudly displayed.. 1121035
1 on Hand
More Info/Options for Yoshimura R-22 Stainless Bling Exhaust System 4402851
|
|
|
|
|
|
|
|
$236.99
Khrome Werks 3 in. HP-Plus Slip-On Slash-Cut Mufflers 4402124
Dennis Kirk Part #: 4402124
Khrome Werks 3 in. HP-Plus Slip-On Slash-Cut Mufflers 4402124: Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound. Use all factory mounting hardware. Sold in pairs. OEM heat shields may be retained. Made in the U.S.A.. U.S. patent 5,173,576. , , NOTE: Will fit 91-04 models if mounting bracket H25-2042 is used. , , NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly., NOTE: These mufflers are designed for use on close-course competition motorcycles only and do not conform to U.S. EPA noise emission standards., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing..
2 on Hand
More Info/Options for Khrome Werks 3 in. HP-Plus Slip-On Slash-Cut Mufflers 4402124
|
|
|
|
$255.99
Khrome Werks 3 in. HP-Plus Slip-On Slash-Cut Mufflers 4402130
Dennis Kirk Part #: 4402130
Khrome Werks 3 in. HP-Plus Slip-On Slash-Cut Mufflers 4402130: Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound. Use all factory mounting hardware. Sold in pairs. OEM heat shields may be retained. Made in the U.S.A.. U.S. patent 5,173,576. , , NOTE: Will fit 91-04 models if mounting bracket H25-2042 is used. , , NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly., NOTE: These mufflers are designed for use on close-course competition motorcycles only and do not conform to U.S. EPA noise emission standards., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing..
| |
