Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Cycle Shack 1 3, 4 in, H44189 Cycle Shack 1 3, H44209 Cycle Shack 1 3

$474.99 Cobra Speedster Longs Exhaust with PowerPort 449352 Dennis Kirk Part #: 449352 Cobra Speedster Longs Exhaust with PowerPort 449352: Manufacturer part # 6955 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Include mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6955 2 on Hand More Info/Options for Cobra Speedster Longs Exhaust with PowerPort 449352

$499.99 Cobra Speedster Longs Exhaust with PowerPort 4401445 Dennis Kirk Part #: 4401445 Cobra Speedster Longs Exhaust with PowerPort 4401445: Manufacturer part # 6951 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Include mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6951 1 on Hand More Info/Options for Cobra Speedster Longs Exhaust with PowerPort 4401445

$56.99 Cycle Shack Heat Shield for 1 3/4 in M Pipes 4402327 Dennis Kirk Part #: 4402327 Cycle Shack Heat Shield for 1 3/4 in M Pipes 4402327: Manufacturer part # HS-27 - Heat shield for 1 3/4 in. M pipes; Part Nos. 44-02316, 44-02314, 44-02315, 44-02317, H44-066 and h25-045. , , NOTE: Only for 07-08 models. HS-27 1 on Hand More Info/Options for Cycle Shack Heat Shield for 1 3/4 in M Pipes 4402327

$415.99 Cobra Dragsters 4400235 Dennis Kirk Part #: 4400235 Cobra Dragsters 4400235: Manufacturer part # 6830 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a nonblueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , 1 Front Exhaust and Heat Shield Assembly, 1 Rear Exhaust and Heat Shield Assembly, 6 Hose Clamps, 4 Bolts, Hex 5/16"x5/8", Screw, buttonhead, 1/4"x3/8", 2 Billet Muffler Tips, 1 Exhaust Mount Bracket, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6830 1 on Hand More Info/Options for Cobra Dragsters 4400235

$426.99 Cobra Dragsters 4401441 Dennis Kirk Part #: 4401441 Cobra Dragsters 4401441: Manufacturer part # 6811 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a nonblueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , 1 Front Exhaust and Heat Shield Assembly, 1 Rear Exhaust and Heat Shield Assembly, 6 Hose Clamps, 4 Bolts, Hex 5/16"x5/8", Screw, buttonhead, 1/4"x3/8", 2 Billet Muffler Tips, 1 Exhaust Mount Bracket, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6811 1 on Hand More Info/Options for Cobra Dragsters 4401441

$415.99 Cobra Dragsters 4401442 Dennis Kirk Part #: 4401442 Cobra Dragsters 4401442: Manufacturer part # 6831 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a nonblueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , 1 Front Exhaust and Heat Shield Assembly, 1 Rear Exhaust and Heat Shield Assembly, 6 Hose Clamps, 4 Bolts, Hex 5/16"x5/8", Screw, buttonhead, 1/4"x3/8", 2 Billet Muffler Tips, 1 Exhaust Mount Bracket, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6831 1 on Hand More Info/Options for Cobra Dragsters 4401442

$415.99 Cobra Dragsters 4400232 Dennis Kirk Part #: 4400232 Cobra Dragsters 4400232: Manufacturer part # 6816 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a nonblueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , 1 Front Exhaust and Heat Shield Assembly, 1 Rear Exhaust and Heat Shield Assembly, 6 Hose Clamps, 4 Bolts, Hex 5/16"x5/8", Screw, buttonhead, 1/4"x3/8", 2 Billet Muffler Tips, 1 Exhaust Mount Bracket, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6816 1 on Hand More Info/Options for Cobra Dragsters 4400232

$415.99 Cobra Dragsters 4400233 Dennis Kirk Part #: 4400233 Cobra Dragsters 4400233: Manufacturer part # 6815 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a nonblueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , 1 Front Exhaust and Heat Shield Assembly, 1 Rear Exhaust and Heat Shield Assembly, 6 Hose Clamps, 4 Bolts, Hex 5/16"x5/8", Screw, buttonhead, 1/4"x3/8", 2 Billet Muffler Tips, 1 Exhaust Mount Bracket, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6815 1 on Hand More Info/Options for Cobra Dragsters 4400233

$420.99 Cobra Dragsters 4400234 Dennis Kirk Part #: 4400234 Cobra Dragsters 4400234: Manufacturer part # 6810 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a nonblueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , 1 Front Exhaust and Heat Shield Assembly, 1 Rear Exhaust and Heat Shield Assembly, 6 Hose Clamps, 4 Bolts, Hex 5/16"x5/8", Screw, buttonhead, 1/4"x3/8", 2 Billet Muffler Tips, 1 Exhaust Mount Bracket, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6810 1 on Hand More Info/Options for Cobra Dragsters 4400234

$350.99 Cobra True-Duals Header System 4402397 Dennis Kirk Part #: 4402397 Cobra True-Duals Header System 4402397: Manufacturer part # 6251 - Feature individual 1 3/4" headpipes for increased exhaust flow. 2.5" one-piece heat shields provide proportionality and seamless, unbroken flow to traditionally styled V-Twins. Accept Cobra slip-on mufflers or any 95-08 OEM-style mufflers. , , NOTE: Mufflers not included; must be purchased separately., , NOTES: There is not warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. 6251 2 on Hand More Info/Options for Cobra True-Duals Header System 4402397

CLOSEOUT! Was: $398.99 Now: $299.24 Cobra 2 1/4 in. Loboy Staggered Hotrod Exhaust System 448295 Dennis Kirk Part #: 448295 Cobra 2 1/4 in. Loboy Staggered Hotrod Exhaust System 448295: Manufacturer part # 6805 - Full-length, 215° wraparound heat shields make pipes and mufflers both appear to be 2 1/4 in. in diameter (pipes are actually 1 3/4 in.). All components (head pipes, mufflers and heat shields) are triple chrome plated. Take out a single screw and the baffles can be removed. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A.. , FOR HOT ROD TIPS ORDER: , Long slash-cut 44-5883, Short slash-cut 44-5884, Upper-cut 44-5885, , NOTE: Fits with floorboards, NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6805 1 on Hand More Info/Options for Cobra 2 1/4 in. Loboy Staggered Hotrod Exhaust System 448295

CLOSEOUT! Was: $272.99 Now: $204.74 Cycle Shack Chrome One-Piece Mufflers - Slash Cut w/Woven Stainless Steel Sound Blanket 4400008 Dennis Kirk Part #: 4400008 Cycle Shack Chrome One-Piece Mufflers - Slash Cut w/Woven Stainless Steel Sound Blanket 4400008: Manufacturer part # MHD-289 SS - 3 in. O.D. mufflers are available in four different styles. Baffles with woven stainless steel sound blanket helps prevent hot spots and discoloration -- takes the crackle out of exhaust for a more mellow tone. Redesigned for easy installation to OEM brackets. Sold in pairs. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing. MHD-289 SS 1 on Hand More Info/Options for Cycle Shack Chrome One-Piece Mufflers - Slash Cut w/Woven Stainless Steel Sound Blanket 4400008

$278.99 Cycle Shack 1 3/4 in. Slash-Cut M Pipes 4400392 Dennis Kirk Part #: 4400392 Cycle Shack 1 3/4 in. Slash-Cut M Pipes 4400392: Manufacturer part # PHD-132 SS - Classic-style chrome-finished pipes feature 2 1/2 in. muffler bodies with removable baffles. 80-85 models require the use of brake pedal stop, PART NO. 27-359. Mounting bracket included, replacement available seperately order PART NO. 27-355. NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-132 SS 1 on Hand More Info/Options for Cycle Shack 1 3/4 in. Slash-Cut M Pipes 4400392

$267.99 H44189 Cycle Shack 1 3/4 in. Slash-Cut M Pipes Dennis Kirk Part #: H44189 H44189 Cycle Shack 1 3/4 in. Slash-Cut M Pipes: Manufacturer part # PDH-130 SS - Classic-style chrome-finished pipes feature 2 1/2 in. muffler bodies with removable baffles. 80-85 models require the use of brake pedal stop, PART NO. 27-359. Mounting bracket included, replacement available seperately order PART NO. 27-355. NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PDH-130 SS 4 on Hand More Info/Options for H44189 Cycle Shack 1 3/4 in. Slash-Cut M Pipes

$263.99 Cycle Shack 1 3/4 in. Slash-Cut M Pipes 43670 Dennis Kirk Part #: 43670 Cycle Shack 1 3/4 in. Slash-Cut M Pipes 43670: Manufacturer part # PHD-112 SS - Classic-style chrome-finished pipes feature 2 1/2 in. muffler bodies with removable baffles. 80-85 models require the use of brake pedal stop, PART NO. 27-359. Mounting bracket included, replacement available seperately order PART NO. 27-355. NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-112 SS 1 on Hand More Info/Options for Cycle Shack 1 3/4 in. Slash-Cut M Pipes 43670

CLOSEOUT! Was: $322.99 Now: $242.24 H44209 Cycle Shack 1 3/4 in. Slash-Cut M Pipes Dennis Kirk Part #: H44209 H44209 Cycle Shack 1 3/4 in. Slash-Cut M Pipes: Manufacturer part # PHD-140 SS - Classic-style chrome-finished pipes feature 2 1/2 in. muffler bodies with removable baffles. 80-85 models require the use of brake pedal stop, PART NO. 27-359. Mounting bracket included, replacement available seperately order PART NO. 27-355. NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-140 SS 1 on Hand More Info/Options for H44209 Cycle Shack 1 3/4 in. Slash-Cut M Pipes

$263.99 H44427 Cycle Shack 1 3/4 in. Slash-Cut M Pipes Dennis Kirk Part #: H44427 H44427 Cycle Shack 1 3/4 in. Slash-Cut M Pipes: Manufacturer part # PHD-116 SSA - Classic-style chrome-finished pipes feature 2 1/2 in. muffler bodies with removable baffles. 80-85 models require the use of brake pedal stop, PART NO. 27-359. Mounting bracket included, replacement available seperately order PART NO. 27-355. NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-116 SSA 1 on Hand More Info/Options for H44427 Cycle Shack 1 3/4 in. Slash-Cut M Pipes

$256.99 Cycle Shack Chrome One-Piece Muffler - Straight Cut w/All Steel Baffle 4400024 Dennis Kirk Part #: 4400024 Cycle Shack Chrome One-Piece Muffler - Straight Cut w/All Steel Baffle 4400024: Manufacturer part # MHD-291 STA - 3 in. O.D. mufflers are available in four different styles. Redesigned for easy installation to OEM brackets. Sold in pairs. Made in the U.S.A., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See Chemicals and Lubrication section for products that will help prevent or remove blueing. MHD-291 STA 1 on Hand More Info/Options for Cycle Shack Chrome One-Piece Muffler - Straight Cut w/All Steel Baffle 4400024

$256.99 Cycle Shack Chrome One-Piece Muffler - Straight Cut w/All Steel Baffle 4400017 Dennis Kirk Part #: 4400017 Cycle Shack Chrome One-Piece Muffler - Straight Cut w/All Steel Baffle 4400017: Manufacturer part # MHD-290 STA - 3 in. O.D. mufflers are available in four different styles. Redesigned for easy installation to OEM brackets. Sold in pairs. Made in the U.S.A., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See Chemicals and Lubrication section for products that will help prevent or remove blueing. MHD-290 STA 1 on Hand More Info/Options for Cycle Shack Chrome One-Piece Muffler - Straight Cut w/All Steel Baffle 4400017

$67.99 Emgo Bell-End Megaphone Mufflers 433827 Dennis Kirk Part #: 433827 Emgo Bell-End Megaphone Mufflers 433827: Bring back the glory days of choppers with these retro-styling mufflers. With a 1 3/4" inlet, a reducer will allow for an additional fitment to 1 5/8" and 1 1/2". The baffle can be removed. Comes in upswept or standard styles. Sold each. Right or Left side, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration, , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... 3 on Hand More Info/Options for Emgo Bell-End Megaphone Mufflers 433827

$63.99 Emgo Bell-End Megaphone Mufflers 433825 Dennis Kirk Part #: 433825 Emgo Bell-End Megaphone Mufflers 433825: Bring back the glory days of choppers with these retro-styling mufflers. With a 1 3/4" inlet, a reducer will allow for an additional fitment to 1 5/8" and 1 1/2". The baffle can be removed. Comes in upswept or standard styles. Sold each. Right or Left side, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration, , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... 10+ on hand More Info/Options for Emgo Bell-End Megaphone Mufflers 433825

$224.99 Cycle Shack 1 3/4 in. Drag Pipes 4402311 Dennis Kirk Part #: 4402311 Cycle Shack 1 3/4 in. Drag Pipes 4402311: Manufacturer part # PHD-161 SD - These one-piece 40" pipes mount to the OEM bracket. Fit all XL models including 883C/1200C. 86-87 models require brake pedal stop PART NO. 27-359. Slash-out tip. Baffles sold separately. 04-08 1 3/4" pipes accept OEM heat shields. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-161 SD