TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Drag Specialties Gas Tank w, Drag Specialties 2 in

$149.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties Rubber Mount Gas Tank 011575BX39 Manufacturer: Drag Specialties Dennis Kirk Part #: H18226 Drag Specialties Rubber Mount Gas Tank: Manufacturer part # 011575BX39 - Heavy gauge steel with reinforced seams. Includes extra strong mounting tabs. 3.3 gallon tanks have high tunnel design that adds fuel capacity without looking tall; 3.3 gallon tanks may require modification to nose of seat. Unpainted steel finish. Uses 22mm petcock. , NOTE: If you eliminate or disconnect the Original Equipment continuous venting system on 1996 and later models, you may not reuse your stock vented cap, but may replace it with an earlier 82-E96 version of the screw-type vented cap, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011575BX39 1 on hand More Info/Options for Drag Specialties Rubber Mount Gas Tank 011575BX39

$341.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties Quickbob Rubbermount Gas Tank with Screw-In Bungs 011651BX38 Manufacturer: Drag Specialties Dennis Kirk Part #: H18222 Drag Specialties Quickbob Rubbermount Gas Tank with Screw-In Bungs: Manufacturer part # 011651BX38 - One-piece replicas of Fat Bob tanks with 3.6-gallon capacity. Two Bungs for screw-in type caps. Comes with rubber mount brackets and hardware. Speedometer not included; any Drag Specialties 4 5/8 in. speedometer for use with FL dash will work (except H40-0109) with H18-223 tank on 82-94 models. If you want to use the OEM electronic speedometer on 95-01 models, order Part No. H18-223 tank along with H18-225 mount kit with dash (mount kit also includes coil and ignition switch relocation brackets). Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011651BX38 1 on hand More Info/Options for Drag Specialties Quickbob Rubbermount Gas Tank with Screw-In Bungs 011651BX38

$352.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps 011660BX40 Manufacturer: Drag Specialties Dennis Kirk Part #: H18532 Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps: Manufacturer part # 011660BX40 - No dummy extension, 4.2 gallon, steel tank if fully functional. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth top tank eliminates the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L x 16 in. W. Dual screw-in caps are not included and must be purchased separately (use 82-E96 style caps). All necessary hardware included. , NOTE: 96-99 models require the use of pre-96 petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011660BX40 1 on hand More Info/Options for Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps 011660BX40

$349.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap 011675BX40 Manufacturer: Drag Specialties Dennis Kirk Part #: H18531 Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap: Manufacturer part # 011675BX40 - Smooth-Top tank has no dummy extension, 4.2 gallon, dash-style tank is fully functional. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth-top tank eliminates the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L by 16 in. W. Single screw-in cap is not included and must be purchased separately (use 82-E96 style caps). All necessary hardware included. , NOTE: 96-99 models require the use of pre-96 petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011675BX40 Expected Soon More Info/Options for Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap 011675BX40

$499.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties 4 in. Extended Tank with Aero Locking Caps 011733BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18058 Drag Specialties 4 in. Extended Tank with Aero Locking Caps: Manufacturer part # 011733BX46 - 2" extended tanks are fully functional, there are no dummy extensions welded to the rear of the tank. Tanks come with raw finish and accept stock-style speedometers and dash. Contoured to fit around the nose of most seats (some seats may require modification). Aero caps are included with tank, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 011733BX46 1 on hand More Info/Options for Drag Specialties 4 in. Extended Tank with Aero Locking Caps 011733BX46

$449.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece Extended Smooth-Top Tank 011735BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18089 Drag Specialties One-Piece Extended Smooth-Top Tank : Manufacturer part # 011735BX46 - Tanks have no dummy extensions, 4.2 gallon. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth top tank eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L x 16 in. W. Aero locking caps are included. All necessary hardware included. NOTE: Seat nose may require modification. WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed before being painted to eliminate potential problems.. 011735BX46 1 on hand More Info/Options for Drag Specialties One-Piece Extended Smooth-Top Tank 011735BX46

$439.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece Extended Gas Tank 011737BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18520 Drag Specialties One-Piece Extended Gas Tank : Manufacturer part # 011737BX46 - Smooth-top tank features 2 in. stretch over stock length. Fully functional. No dummy extensions. Single locking Aero cap included. Requires custom gauge mounting. Accept late-style petcock (22mm). No fuel gauge provision. Comes complete with all necessary mounting hardware. 4.2 gallon capacity. , , NOTE: Seat nose may require modification, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011737BX46 1 on hand More Info/Options for Drag Specialties One-Piece Extended Gas Tank 011737BX46

$269.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties Gas Tank with Chrome Aero Style Gas Cap 011742BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18041 Drag Specialties Gas Tank with Chrome Aero Style Gas Cap: Manufacturer part # 011742BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories Heavy-gauge steel construction. Rubber-mounted bolt-on style with flat bottoms. Seams are reinforced and have extra-strong mounting tabs. Feature a high-tunnel design to add fuel capacity without looking tall. Aero-style locking gas cap with keys. Accept a 22mm petcock (left side). 3.3 gallon capacity. May require seat nose modification and relocation of ignition switch, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011742BX46 1 on hand More Info/Options for Drag Specialties Gas Tank with Chrome Aero Style Gas Cap 011742BX46

$236.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties Gas Tank w/Chrome Aero Style Cap 011743BX39 Manufacturer: Drag Specialties Dennis Kirk Part #: H18682 Drag Specialties Gas Tank w/Chrome Aero Style Cap: Manufacturer part # 011743BX39 - Heavy-gauge steel construction. Rubber-mounted bolt-on style with flat bottom. Seams are reinforced and have extra-strong mounting tabs. Features a high-tunnel design to add fuel capacity without looking tall. Aero-style locking gas cap with keys. Accepts a 22mm petcock (right side). 3.3 gallon capacity. May require seat nose modification and relocation of ignition switch, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011743BX39 2 on hand More Info/Options for Drag Specialties Gas Tank w/Chrome Aero Style Cap 011743BX39

$429.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties Quickbob Rubber-Mount Gas Tank with Aero Cap 011748BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18042 Drag Specialties Quickbob Rubber-Mount Gas Tank with Aero Cap: Manufacturer part # 011748BX46 - One-piece replicas of Fat Bob tanks with 3.6-gallon capacity. Smooth-top design. Unpainted steel finish, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011748BX46 1 on hand More Info/Options for Drag Specialties Quickbob Rubber-Mount Gas Tank with Aero Cap 011748BX46

CLEARANCE! Was: $353.95 Now: $249.90 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece Dash Style Tank 011800BX40 Manufacturer: Drag Specialties Dennis Kirk Part #: H18864 Drag Specialties One-Piece Dash Style Tank: Manufacturer part # 011800BX40 - Dual screw in caps. Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank requires the use of 82-E96 gas caps (sold separately), , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011800BX40 2 on hand More Info/Options for Drag Specialties One-Piece Dash Style Tank 011800BX40

$399.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece Smooth Top w/Center Fill 011804BX40 Manufacturer: Drag Specialties Dennis Kirk Part #: H18866 Drag Specialties One-Piece Smooth Top w/Center Fill: Manufacturer part # 011804BX40 - Standard-length tank made from 16-gauge stamped steel. 5.1-gal. capacity. Tank has an arched bottom for that great banana look. Smooth top tanks eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L x 16 in. W. All necessary hardware included. Single Areo gas cap included, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011804BX40 1 on hand More Info/Options for Drag Specialties One-Piece Smooth Top w/Center Fill 011804BX40

$399.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece 2 in. Extended Dash Style Tank 011806BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18867 Drag Specialties One-Piece 2 in. Extended Dash Style Tank: Manufacturer part # 011806BX46 - Standard-length or 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Available in smooth-top design that eliminate the dash completely (requires custom mounting of gauges, ignition switch and dash lights) and dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank requires the use of 82-E96 gas caps (sold separately). , , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011806BX46 1 on hand More Info/Options for Drag Specialties One-Piece 2 in. Extended Dash Style Tank 011806BX46

CLEARANCE! Was: $437.95 Now: $249.90 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill 011808BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18895 Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill: Manufacturer part # 011808BX46 - Standard-length or 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Available in smooth-top design that eliminate the dash completely (requires custom mounting of gauges, ignition switch and dash lights) and dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single Screw-in cap tank requires the use of 82-E96 gas cap (sold separately), , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011808BX46 1 on hand More Info/Options for Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill 011808BX46

$499.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill 011810BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18869 Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill: Manufacturer part # 011810BX46 - 2 in. extended-length tank ade from 16-gauge stamped steel. 5.1-gal. capacity. Smooth-top design that eliminate the dash completely (requires custom mounting of gauges, ignition switch and dash lights). Gas cap included. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 011810BX46 1 on hand More Info/Options for Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill 011810BX46

$369.95 Harley-Davidson > Tanks > Gas Tanks: Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011813BX46 Manufacturer: Drag Specialties Dennis Kirk Part #: H18865 Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011813BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson. Two things go hand in hand at Drag: quality and quantity. Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single screw-in cap tank require the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011813BX46 1 on hand More Info/Options for Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011813BX46