|
|
$44.99
17 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: H19988
17 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37717 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37717
1 on Hand
More Info/Options for 17 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$35.99
17 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines
Dennis Kirk Part #: 1902047
17 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines: Smooth looking, high-performance brake lines. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Clear, non-yellowing Teflon skin is so clear you will only know its there if you touch it. Wipes clean with detergent. Matches Magnum Sterling Chromite II cables and plug wires. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Offers exceptional protection to painted or chromed surfaces. Perfect match to other Magnum Chromite products. Lines accept any -3 fittings. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Made in the U.S.A.. , , Included Items:. , 1. (1) brake line 17" with two 3/8"-24 female inverted flare fittings..
1 on Hand
More Info/Options for 17 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines
|
|
|
|
$32.99
17 in. Magnum Universal Sterling Chromite II Braided Brake Lines
Dennis Kirk Part #: 1902083
17 in. Magnum Universal Sterling Chromite II Braided Brake Lines: Smooth looking, high-performance brake lines. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Clear, non-yellowing Teflon skin is so clear you will only know its there if you touch it. Wipes clean with detergent. Matches Magnum Sterling Chromite II cables and plug wires. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Offers exceptional protection to painted or chromed surfaces. Perfect match to other Magnum Chromite products. Lines accept any -3 fittings. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Made in the U.S.A.. , , One brake line 12 in. W/two 3/8 in.-24 female inverted flare fittings.
1 on Hand
More Info/Options for 17 in. Magnum Universal Sterling Chromite II Braided Brake Lines
|
|
|
|
$44.99
17 in. Magnum 12mm, 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900403
17 in. Magnum 12mm, 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37807 - 12mm, 90 Degree Banjo Fitting Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper line is 13" long with 90° upper banjo fitting, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. Fits Lower Line assembly Part No. 199152, , Included Items: , 1. (1) Brake line 13" with (1) 12mm 90° banjo and (1) 3/8"-24 female inverted flare, 2. (2) 12mm crush washers , NOTE: Upper and lower lines must be purchased separately. 37807
1 on Hand
More Info/Options for 17 in. Magnum 12mm, 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$44.99
17 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900582
17 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37117 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Line is 11" long with 35° upper banjo fitting, ensuring a clean, custom look. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , Included Items: , (1) Brake line 11 in. w/one 10mm 35-degree banjo and one 3/8-24 female inverted flare, (2) 10mm crush washers, , NOTE: , Upper and lower lines must be purchased separately (see below for Part No.'s), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37117
1 on Hand
More Info/Options for 17 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$44.99
17 in. Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: H19982
17 in. Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37217 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37217
1 on Hand
More Info/Options for 17 in. Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
|
|
$57.99
40 in. Magnum 35 degree Braided Custom Brake Lines
Dennis Kirk Part #: 1902262
40 in. Magnum 35 degree Braided Custom Brake Lines: Sames features as the other Chromite II brake lines. Polished stainless braid is more brilliant than regular stainless; Black Pearl braid features black-chrome fittings. 90 degree, 35 degree, or 180 degree 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36 in. - 74 in.. All lines (except XL 04-07) have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end; 04-08 XL lines have a 10mm banjo fitting on the master cylinder end and a 10mm 60 degree banjo fitting on the caliper end. Crush washers and instruction sheet included..
1 on Hand
More Info/Options for 40 in. Magnum 35 degree Braided Custom Brake Lines
|
|
|
|
$40.99
40 in. Magnum Universal Sterling Chromite II Braided Brake Lines
Dennis Kirk Part #: 1902095
40 in. Magnum Universal Sterling Chromite II Braided Brake Lines: Smooth looking, high-performance brake lines. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Clear, non-yellowing Teflon skin is so clear you will only know its there if you touch it. Wipes clean with detergent. Matches Magnum Sterling Chromite II cables and plug wires. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Offers exceptional protection to painted or chromed surfaces. Perfect match to other Magnum Chromite products. Lines accept any -3 fittings. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Made in the U.S.A.. , , One brake line 12 in. W/two 3/8 in.-24 female inverted flare fittings.
1 on Hand
More Info/Options for 40 in. Magnum Universal Sterling Chromite II Braided Brake Lines
|
|
|
|
$44.99
40 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines
Dennis Kirk Part #: 1902059
40 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines: Smooth looking, high-performance brake lines. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Clear, non-yellowing Teflon skin is so clear you will only know its there if you touch it. Wipes clean with detergent. Matches Magnum Sterling Chromite II cables and plug wires. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Offers exceptional protection to painted or chromed surfaces. Perfect match to other Magnum Chromite products. Lines accept any -3 fittings. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Made in the U.S.A.. , , Included Items:. , 1. (1) brake line 17" with two 3/8"-24 female inverted flare fittings..
1 on Hand
More Info/Options for 40 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines
|
|
|
|
$51.99
35 degrees/40 in./20 in. Magnum Swivel-Fit Single Disc Front Brake Line
Dennis Kirk Part #: 1902367
35 degrees/40 in./20 in. Magnum Swivel-Fit Single Disc Front Brake Line: Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. All lines (except XL 04-08) use 7/16" banjo fittings at the master cylinder and 90 degree 3/8" banjo fittings at the caliper; lines for XL 04-08 models use 10mm banjo fittings at the master cylinder and 60 degree 10mm banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A.. , , Included Items:. , 1. (1) Brake line 48" with one 10mm 90 degree banjo and one 12mm straight banjo fitting. , 2. (2) 10mm crush washer. , 3. (2) 12mm crush washers. , 4. (1) Hose mounting clamp. , 5. (1) Instruction sheet..
2 on Hand
More Info/Options for 35 degrees/40 in./20 in. Magnum Swivel-Fit Single Disc Front Brake Line
|
|
|
|
|
|
$61.99
40 in. Magnum 180 Degree Top Angle Sterling Chromite II Custom Brake Lines
Dennis Kirk Part #: H190202
40 in. Magnum 180 Degree Top Angle Sterling Chromite II Custom Brake Lines: Manufacturer part # 36440 - Smooth looking, high-performance brake line. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Clear, non-yellowing Teflon skin is so clear you will only know it is there if you touch it. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Wipe clean with soap and water. Match Magnum Sterling Chromite cables and plug wires. Offers exceptional protection to painted or chromed surfaces. Has a 90 degree 10mm banjo fitting on the caliper end, , Included Items: , 1. (1) Brake line 36" with (1) 10mm 90° banjo and (1) 12mm straight banjo, 2. (2) 10mm crush washers, 3. (2) 12mm crush washers. 36440
1 on Hand
More Info/Options for 40 in. Magnum 180 Degree Top Angle Sterling Chromite II Custom Brake Lines
|
|
|
|
$56.99
78 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines
Dennis Kirk Part #: 1902079
78 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines: Smooth looking, high-performance brake lines. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Clear, non-yellowing Teflon skin is so clear you will only know its there if you touch it. Wipes clean with detergent. Matches Magnum Sterling Chromite II cables and plug wires. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Offers exceptional protection to painted or chromed surfaces. Perfect match to other Magnum Chromite products. Lines accept any -3 fittings. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Made in the U.S.A.. , , Included Items:. , 1. (1) brake line 17" with two 3/8"-24 female inverted flare fittings..
1 on Hand
More Info/Options for 78 in. Magnum Universal Black Pearl Sterling Chromite II Braided Brake Lines
|
|
|
|
$52.99
78 in. Magnum Universal Sterling Chromite II Braided Brake Lines
Dennis Kirk Part #: 1902115
78 in. Magnum Universal Sterling Chromite II Braided Brake Lines: Smooth looking, high-performance brake lines. Magnums patented non-abrasive Sterling Chromite metal braiding stays bright and chrome-like in brilliancy. Clear, non-yellowing Teflon skin is so clear you will only know its there if you touch it. Wipes clean with detergent. Matches Magnum Sterling Chromite II cables and plug wires. Smooth, unique, chrome-like look because each silver-plated wire strand is coated in a tough enamel. Offers exceptional protection to painted or chromed surfaces. Perfect match to other Magnum Chromite products. Lines accept any -3 fittings. High-temperature polyester and PVC jackets form a moisture barrier under the braiding. Made in the U.S.A.. , , One brake line 12 in. W/two 3/8 in.-24 female inverted flare fittings.
1 on Hand
More Info/Options for 78 in. Magnum Universal Sterling Chromite II Braided Brake Lines
|
|
|
|
$53.99
37 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900592
37 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37137 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Line is 11" long with 35° upper banjo fitting, ensuring a clean, custom look. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , Included Items: , (1) Brake line 11 in. w/one 10mm 35-degree banjo and one 3/8-24 female inverted flare, (2) 10mm crush washers, , NOTE: , Upper and lower lines must be purchased separately (see below for Part No.'s), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37137
1 on Hand
More Info/Options for 37 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$46.99
21 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900584
21 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37121 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Line is 11" long with 35° upper banjo fitting, ensuring a clean, custom look. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , Included Items: , (1) Brake line 11 in. w/one 10mm 35-degree banjo and one 3/8-24 female inverted flare, (2) 10mm crush washers, , NOTE: , Upper and lower lines must be purchased separately (see below for Part No.'s), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37121
1 on Hand
More Info/Options for 21 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$53.99
39 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900593
39 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37139 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Line is 11" long with 35° upper banjo fitting, ensuring a clean, custom look. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , Included Items: , (1) Brake line 11 in. w/one 10mm 35-degree banjo and one 3/8-24 female inverted flare, (2) 10mm crush washers, , NOTE: , Upper and lower lines must be purchased separately (see below for Part No.'s), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37139
1 on Hand
More Info/Options for 39 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$43.99
14 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900580
14 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37114 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Line is 11" long with 35° upper banjo fitting, ensuring a clean, custom look. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , Included Items: , (1) Brake line 11 in. w/one 10mm 35-degree banjo and one 3/8-24 female inverted flare, (2) 10mm crush washers, , NOTE: , Upper and lower lines must be purchased separately (see below for Part No.'s), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, | |
