Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

License Plate Frame Assembly, H490154 Harley-Davidson Harley-Davidson License Plate Frame 4 in

$94.99 Klock Werks Smooth Lower Fillers 506672 Dennis Kirk Part #: 506672 Klock Werks Smooth Lower Fillers 506672: Fill the void between the lower fender and saddlebags. Use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area. Stamped from 16-gauge U.S. steel, these fillers are E-coated to prevent rust and corrosion and for minimal paint prep as well. They are a minor detail with major results. Sold in pairs and include all necessary hardware and instructions to install them. Made in the U.S.A.. , Included Items: , (2) Klock Werks lower fillers, (4) 5/16 in. x 3/4 in. Hex Bolts, , NOTE: Not for use with saddlebag rails., NOTE: For use with or without detachable backrest NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks Smooth Lower Fillers 506672

$94.99 Klock Werks 2 in. Extended Slotted Lower Fillers 506675 Dennis Kirk Part #: 506675 Klock Werks 2 in. Extended Slotted Lower Fillers 506675: Fill the void between the lower fender and saddlebags. Use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area. Stamped from 16-gauge U.S. steel, these fillers are E-coated to prevent rust and corrosion and for minimal paint prep as well. They are a minor detail with major results. Sold in pairs and include all necessary hardware and instructions to install them. Made in the U.S.A.. , Included Items: , (2) Klock Werks Lower Fillers, (4) 5/16 in. x 3/4 in. Hex Bolts, , NOTE: Not for use with saddlebag rails., NOTE: For use with detachable tour pack rack (OEM #53276-04) NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks 2 in. Extended Slotted Lower Fillers 506675

$94.99 Klock Werks Slotted Lower Fillers 506673 Dennis Kirk Part #: 506673 Klock Werks Slotted Lower Fillers 506673: Fill the void between the lower fender and saddlebags. Use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area. Stamped from 16-gauge U.S. steel, these fillers are E-coated to prevent rust and corrosion and for minimal paint prep as well. They are a minor detail with major results. Sold in pairs and include all necessary hardware and instructions to install them. Made in the U.S.A.. , NOTE: Not for use with saddlebag rails., NOTE: For use with detachable tour pack rack (OEM #53276-04) NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks Slotted Lower Fillers 506673

$71.99 Chrome Klock Werks Front Fender Mounting Blocks Dennis Kirk Part #: 271749 Chrome Klock Werks Front Fender Mounting Blocks: Less is more in this minimalist part that provides perfect spacing for your Road King, Road Glide, Street Glide or Ultra project. Besides being used with Klock Werks' Benchmark Front Fenders, they can be used for a variety of custom applications. The spacers are 0.750 in. thick and hole spacing is 3 in. on center to fit FLT or FLHT style forks. Sold in pairs. Made in the U.S.A.. , NOTE: Will not fit Perse front forks.. 2 on Hand More Info/Options for Chrome Klock Werks Front Fender Mounting Blocks

$237.99 Klock Werks WFB Benchmark Front Fender 392957 Dennis Kirk Part #: 392957 Klock Werks WFB Benchmark Front Fender 392957: Fenders are predrilled to fit 21 in. front wheels. Stamped from 14-gauge U.S. steel, these 6 1/2 in. wide fenders are E-coated to prevent rust and corrosion with minimal paint prep required. Following true Klock Werks style, the WFB Benchmark fender adds a clean yet dramatic flow to your stock FL. The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work. Installation requires use of Klock Blocks front fender mounting blocks available separately, PART #s 271749 or 271750. The Benchmark fenders can be paired with the WFB rear fender to complete the Klock Werks Kustom look. Made in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks WFB Benchmark Front Fender 392957

$408.99 Klock Werks French Benchmark Stretch Rear Fender 392956 Dennis Kirk Part #: 392956 Klock Werks French Benchmark Stretch Rear Fender 392956: Give your Kustom Bagger the dramatic look that Klock Werks has become known for. Stamped from 14-gauge U.S. steel, these 7 1/8 in. wide fenders are E-coated to prevent rust and corrosion with minimal paint prep required. Fenders are 6 in. longer than a stock rear touring fender and are a direct replacement for 97-07 touring models. The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work. The fenders mount in the stock location using all stock mounting hardware. All mounting holes are pre-cut to simplify the installation process. Made in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks French Benchmark Stretch Rear Fender 392956

$94.99 Klock Werks 2 in. Extended Smooth Lower Fillers 506674 Dennis Kirk Part #: 506674 Klock Werks 2 in. Extended Smooth Lower Fillers 506674: Fill the void between the lower fender and saddlebags. Use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area. Stamped from 16-gauge U.S. steel, these fillers are E-coated to prevent rust and corrosion and for minimal paint prep as well. They are a minor detail with major results. Sold in pairs and include all necessary hardware and instructions to install them. Made in the U.S.A.. , NOTE: Not for use with saddlebag rails., NOTE: For use with or without detachable backrest NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks 2 in. Extended Smooth Lower Fillers 506674

$370.99 Klock Werks Smooth Benchmark Stretch Rear Fender 392955 Dennis Kirk Part #: 392955 Klock Werks Smooth Benchmark Stretch Rear Fender 392955: Give your Kustom Bagger the dramatic look that Klock Werks has become known for. Stamped from 14-gauge U.S. steel, these 7 1/8 in. wide fenders are E-coated to prevent rust and corrosion with minimal paint prep required. Fenders are 6 in. longer than a stock rear touring fender and are a direct replacement for 97-07 touring models. The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work. The fenders mount in the stock location using all stock mounting hardware. All mounting holes are pre-cut to simplify the installation process. Made in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 1 on Hand More Info/Options for Klock Werks Smooth Benchmark Stretch Rear Fender 392955

CLOSEOUT! Was: $8.99 Now: $6.74 Moto Caps Bad Boy Motobolts License Plate Bolts 492003 Dennis Kirk Part #: 492003 Moto Caps Bad Boy Motobolts License Plate Bolts 492003: Manufacturer part # MBN2146 - Precision-manufactured from billet aircraft alloy aluminum, then anodized to preserve the finish. Feature highly detailed full-color logos that are fade-proof, waterproof and protected by a clear polycarbonate coating used in jet fighter canopies. 7/16 in. head, 3/4 in. thread reach; sold in pairs with nuts and washers included. Made in the U.S.A... MBN2146 1 on Hand More Info/Options for Moto Caps Bad Boy Motobolts License Plate Bolts 492003

CLOSEOUT! Was: $8.99 Now: $6.74 Moto Caps Alien Motobolts License Plate Bolts 492002 Dennis Kirk Part #: 492002 Moto Caps Alien Motobolts License Plate Bolts 492002: Manufacturer part # MBN2145 - Precision-manufactured from billet aircraft alloy aluminum, then anodized to preserve the finish. Feature highly detailed full-color logos that are fade-proof, waterproof and protected by a clear polycarbonate coating used in jet fighter canopies. 7/16 in. head, 3/4 in. thread reach; sold in pairs with nuts and washers included. Made in the U.S.A... MBN2145 1 on Hand More Info/Options for Moto Caps Alien Motobolts License Plate Bolts 492002

CLOSEOUT! Was: $8.99 Now: $6.74 Moto Caps Fear Me Motobolts License Plate Bolts 492004 Dennis Kirk Part #: 492004 Moto Caps Fear Me Motobolts License Plate Bolts 492004: Manufacturer part # MBN2149 - Precision-manufactured from billet aircraft alloy aluminum, then anodized to preserve the finish. Feature highly detailed full-color logos that are fade-proof, waterproof and protected by a clear polycarbonate coating used in jet fighter canopies. 7/16 in. head, 3/4 in. thread reach; sold in pairs with nuts and washers included. Made in the U.S.A... MBN2149 6 on Hand More Info/Options for Moto Caps Fear Me Motobolts License Plate Bolts 492004

$9.99 Moto Caps Iron Cross Motobolts License Plate Bolts 492000 Dennis Kirk Part #: 492000 Moto Caps Iron Cross Motobolts License Plate Bolts 492000: Manufacturer part # MBN2570 - Precision-manufactured from billet aircraft alloy aluminum, then anodized to preserve the finish. Feature highly detailed full-color logos that are fade-proof, waterproof and protected by a clear polycarbonate coating used in jet fighter canopies. 7/16 in. head, 3/4 in. thread reach; sold in pairs with nuts and washers included. Made in the U.S.A... MBN2570 4 on Hand More Info/Options for Moto Caps Iron Cross Motobolts License Plate Bolts 492000

$9.99 Moto Caps Biohazard Motobolts License Plate Bolts 492001 Dennis Kirk Part #: 492001 Moto Caps Biohazard Motobolts License Plate Bolts 492001: Manufacturer part # MBN2594 - Precision-manufactured from billet aircraft alloy aluminum, then anodized to preserve the finish. Feature highly detailed full-color logos that are fade-proof, waterproof and protected by a clear polycarbonate coating used in jet fighter canopies. 7/16 in. head, 3/4 in. thread reach; sold in pairs with nuts and washers included. Made in the U.S.A... MBN2594 4 on Hand More Info/Options for Moto Caps Biohazard Motobolts License Plate Bolts 492001

CLOSEOUT! Was: $497.99 Now: $373.49 H21796 Alloy Art Smoothie Side-Mount Taillight/License Plate Frame Assembly Dennis Kirk Part #: H21796 H21796 Alloy Art Smoothie Side-Mount Taillight/License Plate Frame Assembly: Manufacturer part # SST1 - Billet aluminum, polished and chrome-plated. Dual-function replaceable LED boards. For use with 3/4" axles. 8" x 4 13/16" o.d.; window size 5 13/16" x 3 3/8". Made in the U.S.A.. SST1 1 on Hand More Info/Options for H21796 Alloy Art Smoothie Side-Mount Taillight/License Plate Frame Assembly

CLOSEOUT! Was: $497.99 Now: $373.49 H21797 Alloy Art Smoothie Side-Mount Taillight/License Plate Frame Assembly Dennis Kirk Part #: H21797 H21797 Alloy Art Smoothie Side-Mount Taillight/License Plate Frame Assembly: Manufacturer part # SST2 - Billet aluminum, polished and chrome-plated. Dual-function replaceable LED boards. For use with 3/4" axles. 8" x 4 13/16" o.d.; window size 5 13/16" x 3 3/8". Made in the U.S.A.. SST2 1 on Hand More Info/Options for H21797 Alloy Art Smoothie Side-Mount Taillight/License Plate Frame Assembly

$528.99 Alloy Art Smoothie Sidemount License Plate Holder/LED Taillight 198036 Dennis Kirk Part #: 198036 Alloy Art Smoothie Sidemount License Plate Holder/LED Taillight 198036: Manufacturer part # SST5 - Sidemount design with replacement arm that fits PM inboard driveside brake system having a 3/4 in. or 1 in. axle and supplied bushing. Arm is offset for pulley clearance. Chrome finish, billet aluminum construction. 8 in. x 4-13/16 in. O.D.. 5-13/16 in. x 3-3/8 in. window size. , Fits Performance Machine 18 inch wheels and Performance Machine calipers only. This item ships 3-4 business days after order is placed. SST5 1 on Hand More Info/Options for Alloy Art Smoothie Sidemount License Plate Holder/LED Taillight 198036

$725.99 H390228 Daytec 11 in. Strutless Fender Dennis Kirk Part #: H390228 H390228 Daytec 11 in. Strutless Fender: Manufacturer part # 906830 - For standard swingarm frames. For Goliath 250 frame kits. , , Must be pre-fitted before painting.. 906830 1 on Hand More Info/Options for H390228 Daytec 11 in. Strutless Fender

$360.99 H390225 Daytec 11 in. Contoured Fender Dennis Kirk Part #: H390225 H390225 Daytec 11 in. Contoured Fender: Manufacturer part # 906128 - Fits Goliath 250 frame kit. , , This item ships 3-4 business days after order is placed. Must be pre-fitted before painting.. 906128 1 on Hand More Info/Options for H390225 Daytec 11 in. Contoured Fender

CLOSEOUT! Was: $436.99 Now: $262.19 H390219 Daytec 9 in. Fender Strut Dennis Kirk Part #: H390219 H390219 Daytec 9 in. Fender Strut: Manufacturer part # 90241095S - Chrome steel with blind fender mounting holes, short (approximately 1 1/2 in. shorter). Fits Goliath 250 frame kit and Gen-2 Softail-Style frame kit.. 90241095S 1 on Hand More Info/Options for H390219 Daytec 9 in. Fender Strut

$417.99 Daytec Polished Aluminum 11 in. Fender Strut for 250 Rubbermount 392614 Dennis Kirk Part #: 392614 Daytec Polished Aluminum 11 in. Fender Strut for 250 Rubbermount 392614: Manufacturer part # 906314 - No Further Information Available. 906314 1 on Hand More Info/Options for Daytec Polished Aluminum 11 in. Fender Strut for 250 Rubbermount 392614

$21.95 H490154 Harley-Davidson Harley-Davidson License Plate Frame 4 in. x 7 in. Dennis Kirk Part #: H490154 H490154 Harley-Davidson Harley-Davidson License Plate Frame 4 in. x 7 in.: Manufacturer part # 60050-01 - Make your plate shine with the chrome-plated license plate frame, featuring a black paint-filled Harley-Davidson logo. Includes chrome-plated stainless steel mounting hardware. Fits Wisconsin license plate and plates up to 8-1/4 in. x 4-3/4 in size. OE # 60050-01. Outside Dimensions: 8-1/4 in. x 4-3/4 in. Window Size: 7-5/8 in. x 3-7/8 in. Mounting Hole Centers: 5-3/4 in. x 3-3/8 in. (slotted). 60050-01 3 on Hand More Info/Options for H490154 Harley-Davidson Harley-Davidson License Plate Frame 4 in. x 7 in.

$17.95 H490107 Harley-Davidson Bar & Shield License Plate Hardware Dennis Kirk Part #: H490107 H490107 Harley-Davidson Bar & Shield License Plate Hardware: Manufacturer part # 41161-01 - Your bike is Harley to the core. And your license plate hardware should be no exception. This chrome-plated hardware kit features white Bar & Shield logos, set off by a black background. Sold in a set of four, these ¼ in.-20 x ¾ in. fasteners include lock nuts and washers. OE # 41161-01.. 41161-01 3 on Hand More Info/Options for H490107 Harley-Davidson Bar & Shield License Plate Hardware

$21.95 H490155 Harley-Davidson Harley-Davidson License Plate Frame7-1/4 in. x 4-1/4 in. Dennis Kirk Part #: H490155 H490155 Harley-Davidson Harley-Davidson License Plate Frame7-1/4 in. x 4-1/4 in.: Manufacturer part # 60051-01 - Make your plate shine with the chrome-plated license plate frame, featuring a black paint-filled Harley-Davidson logo. Includes chrome-plated stainless steel mounting hardware. Fits license plates up to 7-1/4 in. x 4-1/4 in size. OE # 60051-01. Outside Dimensions: 7-1/4 in. x 4-3/4 in. Window Size: 6-3/4 in. x 3-5/8 in. Mounting Hole Centers: 5-3/4 in. x 2-3/4 in. (slotted). 60051-01 3 on Hand More Info/Options for H490155 Harley-Davidson Harley-Davidson License Plate Frame7-1/4 in. x 4-1/4 in.