|
|
|
|
$273.99
Cycle Shack 1 3/4 in. Drag Pipes 4402300
Dennis Kirk Part #: 4402300
Cycle Shack 1 3/4 in. Drag Pipes 4402300: Manufacturer part # PHD-137 - Traditional-style drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. Mounting bracket included. 1 3/4" pipes accept OEM or Cycle Shack heat shields. Baffles sold separately. Slash-out tip. Made in the U.S.A.. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD-137
1 on Hand
More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes 4402300
|
|
|
|
|
|
|
|
|
|
$759.99
Eddie Trottas Thunder Design Phats Exhaust 4400250
Dennis Kirk Part #: 4400250
Eddie Trottas Thunder Design Phats Exhaust 4400250: Manufacturer part # TC-609 - Bike builder Eddie Trotta's latest pipe design. Mandrel bent from a .065 in. tube and then chromed to a show finish. Fit on both left and right side drive bikes and also work on Big Dog motorcycles. For optional heat shields, order DK part no. 25-1454. For optional end caps, order DK part no. 44-01543, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. TC-609
1 on Hand
More Info/Options for Eddie Trottas Thunder Design Phats Exhaust 4400250
|
|
|
|
$759.99
Eddie Trottas Thunder Design D-2 Exhaust 4402635
Dennis Kirk Part #: 4402635
Eddie Trottas Thunder Design D-2 Exhaust 4402635: Manufacturer part # TC-610 - Bike builder Eddie Trotta's latest pipe design. Mandrel bent from a .065 in. tube and then chromed to a show finish. The D-2 pipes are triple-stepped ending with a 2.5" slash cut. Fit on both left and right side drive bikes and also work on Big Dog motorcycles. For optional heat shields, order DK part no. 25-1515. For optional end caps, order DK part no. 44-01543. TC-610
1 on Hand
More Info/Options for Eddie Trottas Thunder Design D-2 Exhaust 4402635
|
|
|
|
$759.99
Eddie Trottas Thunder Design 131 Exhaust 4402634
Dennis Kirk Part #: 4402634
Eddie Trottas Thunder Design 131 Exhaust 4402634: Manufacturer part # TC-599 - Bike builder Eddie Trotta's latest pipe design. Mandrel bent from a .065 in. tube and then chromed to a show finish. The 131 pipes are triple-stepped into a soft bend on a 2.5" mandrel bent thick-walled pipe. Fit on both left and right side drive bikes and also work on Big Dog motorcycles. For optional heat shields, order DK part no. 25-1514. For optional end caps, order DK part no. 44-01543. TC-599
1 on Hand
More Info/Options for Eddie Trottas Thunder Design 131 Exhaust 4402634
|
|
|
|
|
|
|
|
|
|
$759.99
Eddie Trottas Thunder Design C-4 Exhaust 4400249
Dennis Kirk Part #: 4400249
Eddie Trottas Thunder Design C-4 Exhaust 4400249: Manufacturer part # TC-607 - Bike builder Eddie Trotta's latest pipe design. Mandrel bent from a .065 in. tube and then chromed to a show finish. Fit on both left and right side drive bikes and also work on Big Dog motorcycles. For optional heat shields, order DK part no. 251455. Optional heat shields, 25-1455, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. TC-607
1 on Hand
More Info/Options for Eddie Trottas Thunder Design C-4 Exhaust 4400249
|
|
|
|
|
|
|
|
|
|
|
|
$545.99
Cobra Speedster Shorts Exhaust with Powerport 4402671
Dennis Kirk Part #: 4402671
Cobra Speedster Shorts Exhaust with Powerport 4402671: Manufacturer part # 6765 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Includes Dual 02 sensor ports. Best fit and finish exhaust on the market. Includes mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing.. 6765
Expected Soon
More Info/Options for Cobra Speedster Shorts Exhaust with Powerport 4402671
|
|
|
|
$354.99
Cobra 4 in. Slip-On Slash-Down Mufflers 448282
Dennis Kirk Part #: 448282
Cobra 4 in. Slip-On Slash-Down Mufflers 448282: Manufacturer part # 6201SD - Quality mufflers welded from mild steel then subjected to a four-step chrome-plating process. Unique cooling chamber helps prevent blueing. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6201SD
1 on Hand
More Info/Options for Cobra 4 in. Slip-On Slash-Down Mufflers 448282
|
|
|
|
$399.99
Cobra 4 in. Slip-On Mufflers with Billet Tip 4400248
Dennis Kirk Part #: 4400248
Cobra 4 in. Slip-On Mufflers with Billet Tip 4400248: Manufacturer part # 6202 - Quality mufflers welded from mild steel then subjected to a four-step chrome-plating process. Unique cooling chamber helps prevent blueing. Trouble-free installation -- all necessary mounting hardware and instructions are included. Removable baffles. Made in the U.S.A., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6202
3 on Hand
More Info/Options for Cobra 4 in. Slip-On Mufflers with Billet Tip 4400248
|
|
|
|
$474.99
Cobra PowerPro HP 2 into 1 Exhaust 4402668
Dennis Kirk Part #: 4402668
Cobra PowerPro HP 2 into 1 Exhaust 4402668: Manufacturer part # 6430 - Same as the original PowerPro but with a new cylindrical muffler body along with the megaphone style. A chromed 3.5 in. muffler body with a delicately machined chromed billet tip adds looks to any bike. Includes Dual O2 sensor ports. Internal cooling technology keeps a perfect non-blueing muffler body looking great. Full-length head shield. Double-insulated body. INCLUDED ITEMS: Two front and rear exhaust headpipe. Two front and rear exhaust heatshield. One collector heatshield. One muffler. One exhaust bracket. Five clamps, heatshields. One clamps, headpipes. Two clamp, muffler. Two bolt, hex 5/16"-18 x 5/8". , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing.. 6430
1 on Hand
More Info/Options for Cobra PowerPro HP 2 into 1 Exhaust 4402668
|
|
|
|
|
|
$279.99
Cobra 2 in. Drag Pipes 448280
Dennis Kirk Part #: 448280
Cobra 2 in. Drag Pipes 448280: Manufacturer part # 6200 - Full-length, 215 degree wraparound heat shields make pipes and mufflers appear to be 2" dia. (pipes are actually 1 3/4"). All components (head pipes, mufflers and heat shields) are triple chrome plated. Radial slash-cut mufflers. Take out a single screw and the baffles can be removed. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6200
1 on Hand
More Info/Options for Cobra 2 in. Drag Pipes 448280
|
|
|
|
$559.99
Cobra Speedster Slash-Down Exhaust with PowerPort 4402673
Dennis Kirk Part #: 4402673
Cobra Speedster Slash-Down Exhaust with PowerPort 4402673: Manufacturer part # 6865 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Includes Dual O2 sensor ports. Best fit and finish exhaust on the market. Include mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing.. 6865
Expected Soon
More Info/Options for Cobra Speedster Slash-Down Exhaust with PowerPort 4402673
|
|
|
|
$464.99
Cobra Power Pro 2-into-1 Exhaust 4402667
Dennis Kirk Part #: 4402667
Cobra Power Pro 2-into-1 Exhaust 4402667: Manufacturer part # 6415 - 222° 2-into-1 shield system is the first of its kind in the industry. 1 3/4 in. headpipe. Industry-leading muffler technology and unique baffle design. Proprietary internal cooling system produces a non-blueing finish. Elliptical | |
