|
|
$317.99
Cycle Shack Oval Mufflers 4402109
Dennis Kirk Part #: 4402109
Cycle Shack Oval Mufflers 4402109: Manufacturer part # MOV-437 - New, unique oval design made from 4" tubing. Simply installs onto the stock OEM head pipes. Feature great sound with increased performance. Chrome finish. Hardware/mounting brackets included as needed. Sold in pairs. Made in the U.S.A., , NOTE: 91-94 models will require the use of a 95-08 mounting bracket Part No. H25-2042, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. MOV-437
1 on Hand
More Info/Options for Cycle Shack Oval Mufflers 4402109
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$175.99
Cycle Shack Slash-Down Slip-On Replacement Mufflers 449973
Dennis Kirk Part #: 449973
Cycle Shack Slash-Down Slip-On Replacement Mufflers 449973: Manufacturer part # MHD-139 SD - Feature an all-steel core that will not burn out. Show-chrome quality will last for years. Mufflers use stock mounts. 2-1/2in. diameter. Sold in pairs. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing. MHD-139 SD
6 on Hand
More Info/Options for Cycle Shack Slash-Down Slip-On Replacement Mufflers 449973
|
|
|
|
$427.99
Cycle Shack 2 in. Tapered Shotgun-Style M Pipes 449621
Dennis Kirk Part #: 449621
Cycle Shack 2 in. Tapered Shotgun-Style M Pipes 449621: Manufacturer part # PHD-230 T - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies withnon-removable baffles. Includes mounting bracket. 2" pipes include rear heat shield must reuse front. Made in the U.S.A., , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-230 T
2 on Hand
More Info/Options for Cycle Shack 2 in. Tapered Shotgun-Style M Pipes 449621
|
|
|
|
|
|
CLOSEOUT!
Was: $283.99
Now: $212.99
Cycle Shack 1 3/4 in. Shotgun-Style Slash Cut M Pipes 4400003
Dennis Kirk Part #: 4400003
Cycle Shack 1 3/4 in. Shotgun-Style Slash Cut M Pipes 4400003: Manufacturer part # PHD-139 SS - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies with removable baffles. Includes mounting bracket. Original factory heat shields are retained. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-139 SS
1 on Hand
More Info/Options for Cycle Shack 1 3/4 in. Shotgun-Style Slash Cut M Pipes 4400003
|
|
|
|
$436.99
Tapered Tip Cycle Shack 2 in. M Pipes
Dennis Kirk Part #: 4402307
Tapered Tip Cycle Shack 2 in. M Pipes: Manufacturer part # PHD-260 T - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-out tip. 86-87 models require brake pedal stop PART NO. 27-359. , , NOTE: Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-260 T
1 on Hand
More Info/Options for Tapered Tip Cycle Shack 2 in. M Pipes
|
|
|
|
$427.99
Cycle Shack Chrome Two-Piece Mufflers with Interchangeable Tips - Baffle with Woven Stainless Steel Sound Blanket 4400034
Dennis Kirk Part #: 4400034
Cycle Shack Chrome Two-Piece Mufflers with Interchangeable Tips - Baffle with Woven Stainless Steel Sound Blanket 4400034: Manufacturer part # MHD-292 TO - 3 in. O.D., 29 in. long bright nickle-chrome finish replacement mufflers. Interchangeable tips give you the option to change the look of your exhaust system without having to replace the entire muffler. Tapered Tip use: 44-00049. Rocket Tip use: 44-00050. Torpedo Tip use: 44-00052. Available with all-steel baffles or baffles with a woven stainless steel sound blanket. Baffles with woven stainless steel sound blanket helps prevent hot spots and discoloration -- takes the crackle out of exhaust for a more mellow tone. Redesigned for easy installation to OEM brackets. Sold in pairs. Made in the U.S.A., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. MHD-292 TO
1 on Hand
More Info/Options for Cycle Shack Chrome Two-Piece Mufflers with Interchangeable Tips - Baffle with Woven Stainless Steel Sound Blanket 4400034
|
|
|
|
$374.99
Cycle Shack Slash-Cut 2 in. Drag Pipe 449623
Dennis Kirk Part #: 449623
Cycle Shack Slash-Cut 2 in. Drag Pipe 449623: Manufacturer part # PHD-231 - These 40 in. drag pipes deliver head-turning sound. Provide sufficient ground clearance and excellent fit. Must order mounting bracket part number 27-353. For optional silencer insert order Part No. 44830 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-231
1 on Hand
More Info/Options for Cycle Shack Slash-Cut 2 in. Drag Pipe 449623
|
|
|
|
|
|
CLEARANCE!
Was: $375.99
Now: $281.99
Cycle Shack Chrome Two-Piece Muffler with Interchangeable Tips - All Steel Baffle 4400036
Dennis Kirk Part #: 4400036
Cycle Shack Chrome Two-Piece Muffler with Interchangeable Tips - All Steel Baffle 4400036: Manufacturer part # MHD-325 TA - 3 in. O.D., 29 in. long bright nickle-chrome finish replacement mufflers. Interchangeable tips give you the option to change the look of your exhaust system without having to replace the entire muffler. Taper Tip use: 44-00049. Rocket Tip use: 44-0050. Torpedo Tip use: 44-00052. Available with all-steel baffles or baffles with a woven stainless steel sound blanket. Baffles with woven stainless steel sound blanket helps prevent hot spots and discoloration -- takes the crackle out of exhaust for a more mellow tone. Redesigned for easy installation to OEM brackets. Sold in pairs. Made in the U.S.A. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See Chemicals and Lubrication section for products that will help prevent or remove blueing. MHD-325 TA
1 on Hand
More Info/Options for Cycle Shack Chrome Two-Piece Muffler with Interchangeable Tips - All Steel Baffle 4400036
|
|
|
|
$256.99
Cycle Shack 1 3/4 in. Drag Pipes 4402494
Dennis Kirk Part #: 4402494
Cycle Shack 1 3/4 in. Drag Pipes 4402494: Manufacturer part # PHD-148 A - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Straight-through chrome style and sound. Slash-down tip. Includes channel mounts and hardware to mount pipes directly to OEM brackets. 40" long. Baffles sold separately. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD-148 A
1 on Hand
More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes 4402494
|
|
|
|
CLOSEOUT!
Was: $361.99
Now: $271.49
Cycle Shack 2 in. Slash-Cut Shotgun-Style M Pipes 4400055
Dennis Kirk Part #: 4400055
Cycle Shack 2 in. Slash-Cut Shotgun-Style M Pipes 4400055: Manufacturer part # PHD-239 SS - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies with removable baffles. Includes mounting bracket. 2" pipes include rear heatshield, must reuse front. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-239 SS
1 on Hand
More Info/Options for Cycle Shack 2 in. Slash-Cut Shotgun-Style M Pipes 4400055
|
|
|
|
|
|
|
|
$246.99
H44220 Cycle Shack Tapered Slip-On Replacement Mufflers
Dennis Kirk Part #: H44220
H44220 Cycle Shack Tapered Slip-On Replacement Mufflers: Manufacturer part # MHD-137 T - Feature an all-steel core that will not burn out. Show-chrome quality will last for years. Mufflers use stock mounts. 2-1/2in. diameter. Sold in pairs. NOTE: The baffles in these mufflers are not removable , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing. MHD-137 T
3 on Hand
More Info/Options for H44220 Cycle Shack Tapered Slip-On Replacement Mufflers
|
|
|
|
$427.99
Cycle Shack 2 in. Slash-Cut M Pipes 449620
Dennis Kirk Part #: 449620
Cycle Shack 2 in. Slash-Cut M Pipes 449620: Manufacturer part # PHD-230 SS - One-piece design, with 2 1/2 in. muffler bodies. 2 in. pipes have a stepped header design for added performance. Pipes mount to OEM mounting bracket. Includes heat shields. Made in the U.S.A.. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-230 SS
3 on Hand
More Info/Options for Cycle Shack 2 in. Slash-Cut M Pipes 449620
|
|
|
|
$251.99
H44221 Cycle Shack Turnout Slip-On Replacement Mufflers
Dennis Kirk Part #: H44221
H44221 Cycle Shack Turnout Slip-On Replacement Mufflers: Manufacturer part # MHD-137 TO - Feature an all-steel core that will not burn out. Show-chrome quality will last for years. Mufflers use stock mounts. 2-1/2in. diameter. Sold in pairs. NOTE: The baffles in these mufflers are not removable , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing. MHD-137 TO
Expected Soon
More Info/Options for H44221 Cycle Shack Turnout Slip-On Replacement Mufflers
|
|
|
|
