TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Arlen Ness 1 1, Arlen Ness 1 in, Arlen Ness 1 Inch Chrome Radius Throttle Cable Clamp for Dual-Throttle Cable 03-169

CLEARANCE! Was: $241.99 Now: $145.19 Harley-Davidson > Handlebars & Controls > 1in. Handlebars - with built-in risers: LA Choppers BFL2 Bar w/Chopper Rake, 8 in. Rise Super BFL Bars Manufacturer: LA Choppers Dennis Kirk Part #: 594703 LA Choppers BFL2 Bar w/Chopper Rake, 8 in. Rise: Manufacturer part # Super BFL Bars - Same distinct style as the original BFL bars but re-tooled and redesigned. 1 1/4 in. tubing tapers to 1 in. at end; accept stock-type grips and controls. Brake and clutch sides are dimpled and clearanced to accept wiring and master cylinder; drilled for internal wiring. Available for stock bikes or chopper rake front ends. All bars are 32 in. wide with 8 in. pullback.. Super BFL Bars 1 on hand More Info/Options for LA Choppers BFL2 Bar w/Chopper Rake, 8 in. Rise Super BFL Bars

$2276.99 Harley-Davidson > Handlebars & Controls > 1in. Handlebars - with built-in risers: Custom Cycle All-Internal 1 1/4 in. T-Bar Handlebar and Controls w/out Gauges TBARS Manufacturer: Custom Cycle Dennis Kirk Part #: 594759 Custom Cycle All-Internal 1 1/4 in. T-Bar Handlebar and Controls w/out Gauges: Manufacturer part # TBARS - Hide those ugly throttle cables and hoses. Includes fully-assembled chrome handlebar/control system that hides it all -- reservoirs, wires, throttle cables and hoses. Seven micro switches put all common controls at your fingertips: run/off, start, L&R turn signal, horn, hi/low beam via twist grip and brake light. Complete package includes everything you need: master cylinders, grips, dual cable internal throttle assembly, throttle lock, stainless braided hoses, brake fluid reservoir, clutch fluid reservoir, installation kit, riser mount kit. Extra-long throttle cables, hoses and switch wires make them easy to cut to length. Handlebars with gauges include speedometer, tachometer and indicator lights NOTE: These handlebars incorporate a hydraulic clutch system. Will require the use of a hydraulic clutch actuator or an in-line slave cylinder for proper installation. In-line slave allows for a hydraulic-to-cable conversion.. , , NOTE: Included master cylinder has approximately 20% more travel, therefore compensate fluid displacement with travel not diameter.. , , NOTE: This item ships 3-4 business days after order is placed. TBARS 1 on hand More Info/Options for Custom Cycle All-Internal 1 1/4 in. T-Bar Handlebar and Controls w/out Gauges TBARS

CLEARANCE! Was: $664.99 Now: $166.25 Harley-Davidson > Handlebars & Controls > 1in. Handlebars - with built-in risers: Paul Yaffe Originals Custom Vengeance Fat Bar - Chrome VBAR Manufacturer: Paul Yaffe Originals Dennis Kirk Part #: 594313 Paul Yaffe Originals Custom Vengeance Fat Bar - Chrome: Manufacturer part # VBAR - Paul Yaffe designs are engineered on world class bikes built by Paul Yaffeand his talented crew and their products work because they are tested on their bikes before theyare even considered for production. The latest wild designs 1 1/4 in. bar from the mind of Paul Yaffe. Designed to fit triple trees that have 3.5" center distance mounting holes (except handlebar styles listed below). Chopper handlebars for 46 degrees front ends are designed to fit front ends with at least a 46 degrees rake and 3.5" centers in the triple trees. Standard Chopper handlebars fit most stock 73-05 models that use risers with 3.5" centers (except Springer Softails). Springer Chopper handlebars fit 88-02 Springer Softail models.. VBAR 1 on hand More Info/Options for Paul Yaffe Originals Custom Vengeance Fat Bar - Chrome VBAR

$202.99 Harley-Davidson > Handlebars & Controls > 1in. Handlebars - with built-in risers: Wild 1 Inc. Chubby Low-Profile Pullback Drag Bar WO560 Manufacturer: Wild 1 Inc. Dennis Kirk Part #: 595092 Wild 1 Inc. Chubby Low-Profile Pullback Drag Bar: Manufacturer part # WO560 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls. Made in the U.S.A.. , , Width: 31". , Rise: 8 1/2". , Pullback: 10 1/2". , Center Width: 7 3/4". , End Rise: 10 1/2". , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: No. , Three Notches for 08-Up H-D w/electronic Throttle: No. , Thread Size: 1/2"-13.. WO560 1 on hand More Info/Options for Wild 1 Inc. Chubby Low-Profile Pullback Drag Bar WO560

$235.99 Harley-Davidson > Handlebars & Controls > 7/8in. Handlebars - conventional: CycleSmiths 16 in. Apehanger Handlebars 11316W Manufacturer: CycleSmiths Dennis Kirk Part #: 595755 CycleSmiths 16 in. Apehanger Handlebars: Manufacturer part # 11316W - Unique contours allow handlebars to fit Electra Glides, Street Glides, Ultras and Standards, etc. without any modifications to the fairing. Drilled for internal wiring; accept stock handlebar controls and optional hydraulic clutch controls. Require changing cables/hoses and lengthening the wires. For "Throttle By Wire" only. , , Width: 37 1/2 in., Rise: 16 1/2 in., Pullback: 7 1/2 in., Center Width: 11 in., End Rise: 15 1/2 in., 1 in. Diameter Clamping Width: 5 1/2 in., Inside Width of Knurling/Outside: 2 3/4 in./ 4 1/4 in., Drilled for Internal Wiring: Yes, Dimpled to Prevent Pinching Control Wires: No, Notches for 08-up H-D with Electronic Throttle: Yes , , NOTE: Will not fit Touring 08-09 models. 11316W 4 on hand More Info/Options for CycleSmiths 16 in. Apehanger Handlebars 11316W

$235.99 Harley-Davidson > Handlebars & Controls > 7/8in. Handlebars - conventional: CycleSmiths 13 in. Apehanger Handlebars 113W Manufacturer: CycleSmiths Dennis Kirk Part #: 595754 CycleSmiths 13 in. Apehanger Handlebars: Manufacturer part # 113W - Unique contours allow handlebars to fit Electra Glides, Street Glides, Ultras and Standards, etc. without any modifications to the fairing. Drilled for internal wiring; accept stock handlebar controls and optional hydraulic clutch controls. Require changing cables/hoses and lengthening the wires. For "Throttle By Wire" only. , , Width: 38 in., Rise: 13 in., Pullback: 8 in., Center Width: 11 in., End Rise: 12 in., 1 in. Diameter Clamping Width: 5 1/5 in., Inside Width of Knurling/Outside: 2 3/4 in./ 4 1/4 in., Drilled for Internal Wiring: Yes, Dimpled to Prevent Pinching Control Wires: No, Notches for 08-up H-D with Electronic Throttle: Yes , , NOTE: Will not fit Touring 08-09 models. 113W 4 on hand More Info/Options for CycleSmiths 13 in. Apehanger Handlebars 113W

$101.99 Harley-Davidson > Handlebars & Controls > 7/8in. Handlebars - conventional: Flanders Chrome 7/8 in. Handlebar - Buell 65004501 Manufacturer: Flanders Dennis Kirk Part #: 594169 Flanders Chrome 7/8 in. Handlebar - Buell: Manufacturer part # 65004501 - Quality and style from one of the top names in handlebars. Flanders has 50 years experience making superb handlebars. Made of seamless, cold-drawn steel tubing. Bars are knurled, but are not drilled or dimpled and are available in chrome or black Part No. 594170. Made in the U.S.A... 65004501 1 on hand More Info/Options for Flanders Chrome 7/8 in. Handlebar - Buell 65004501

$101.99 Harley-Davidson > Handlebars & Controls > 7/8in. Handlebars - conventional: Flanders Black 7/8 in. Handlebar - Buell 65004502 Manufacturer: Flanders Dennis Kirk Part #: 594170 Flanders Black 7/8 in. Handlebar - Buell: Manufacturer part # 65004502 - Quality and style from one of the top names in handlebars. Flanders has 50 years experience making superb handlebars. Made of seamless, cold-drawn steel tubing. Bars are knurled, but are not drilled or dimpled and also available in chrome Part No. 594169. Made in the U.S.A... 65004502 1 on hand More Info/Options for Flanders Black 7/8 in. Handlebar - Buell 65004502

$235.99 Harley-Davidson > Handlebars & Controls > 7/8in. Handlebars - conventional: CycleSmiths 13 in. Apehanger Handlebars p595754 Manufacturer: CycleSmiths Dennis Kirk Part #: 595809 CycleSmiths 13 in. Apehanger Handlebars: Manufacturer part # p595754 - Unique contours allow handlebars to fit Electra Glides, Street Glides, Ultras and Standards, etc. without any modifications to the fairing. Drilled for internal wiring; accept stock handlebar controls and optional hydraulic clutch controls. Require changing cables/hoses and lengthening the wires. For "Throttle By Wire" only. , , Width: 38 1/2 in., Rise: 13 in., Pullback: 10 in., Center Width: 10 in., End Rise: 12 in., 1 in. Diameter Clamping Width: 5 5/8 in., Inside Width of Knurling/Outside: 2 3/4 in./ 4 1/4 in., Drilled for Internal Wiring: Yes, Dimpled to Prevent Pinching Control Wires: No, Notches for 08-up H-D with Electronic Throttle: Yes , , NOTE: Will not fit Touring 08-09 models. p595754 1 on hand More Info/Options for CycleSmiths 13 in. Apehanger Handlebars p595754

$235.99 Harley-Davidson > Handlebars & Controls > 7/8in. Handlebars - conventional: CycleSmiths 16 in. Apehanger Handlebars p595755 Manufacturer: CycleSmiths Dennis Kirk Part #: 595810 CycleSmiths 16 in. Apehanger Handlebars: Manufacturer part # p595755 - Unique contours allow handlebars to fit Electra Glides, Street Glides, Ultras and Standards, etc. without any modifications to the fairing. Drilled for internal wiring; accept stock handlebar controls and optional hydraulic clutch controls. Require changing cables/hoses and lengthening the wires. For "Throttle By Wire" only. , , Width: 38 in., Rise: 16 in., Pullback: 9 1/2 in., Center Width: 11 in., End Rise: 15 in., 1 in. Diameter Clamping Width: 5 5/8 in., Inside Width of Knurling/Outside: 2 5/8 in./ 4 1/4 in., Drilled for Internal Wiring: Yes, Dimpled to Prevent Pinching Control Wires: No, Notches for 08-up H-D with Electronic Throttle: Yes , , NOTE: Will not fit Touring 08-09 models. p595755 1 on hand More Info/Options for CycleSmiths 16 in. Apehanger Handlebars p595755

$3.99 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Motion Pro Throttle Cable Clips 010030 Manufacturer: Motion Pro Dennis Kirk Part #: H19100 Motion Pro Throttle Cable Clips: Manufacturer part # 010030 - Replaces OEM number 11272. For 96 and up models with clip-in cables.. 010030 4 on hand More Info/Options for Motion Pro Throttle Cable Clips 010030

$3.99 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Motion Pro Idle Cable Clips 010031 Manufacturer: Motion Pro Dennis Kirk Part #: H19101 Motion Pro Idle Cable Clips: Manufacturer part # 010031 - Replaces OEM number 11271. For 96 and up models with clip-in cables.. 010031 4 on hand More Info/Options for Motion Pro Idle Cable Clips 010031

$6.99 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Motion Pro Ferrules for Throttle/Idle Cables 010032 Manufacturer: Motion Pro Dennis Kirk Part #: H19102 Motion Pro Ferrules for Throttle/Idle Cables: Manufacturer part # 010032 - Replaces OEM number 56508-76. For 96 and up models with clip-in cables.. 010032 6 on hand More Info/Options for Motion Pro Ferrules for Throttle/Idle Cables 010032

$2.99 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Motion Pro Throttle Cable Boots 010038 Manufacturer: Motion Pro Dennis Kirk Part #: 197280 Motion Pro Throttle Cable Boots: Manufacturer part # 010038 - High-quality replacement for the original part. Sold in pairs.. 010038 More than 10 on hand More Info/Options for Motion Pro Throttle Cable Boots 010038

$25.99 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Joker Machine Chrome JX Clutch Cable Trim Collar 03-142 Manufacturer: Joker Machine Dennis Kirk Part #: 1900439 Joker Machine Chrome JX Clutch Cable Trim Collar: Manufacturer part # 03-142 - CNC-machined aluminum replacement for OEM-type crimped-on cable lugs that plug into the handlebar lever bracket. Compatible with all Joker Machine hand controls; styling matches JX controls. Install with an Allen wrench. Made in the U.S.A.. Also available in black anodized, use part number 19-00440. , , NOTE: Covers 1/2" diameter lugs... 03-142 1 on hand More Info/Options for Joker Machine Chrome JX Clutch Cable Trim Collar 03-142

$25.99 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Joker Machine Black JX Clutch Cable Trim Collar 03-142BLK Manufacturer: Joker Machine Dennis Kirk Part #: 1900440 Joker Machine Black JX Clutch Cable Trim Collar: Manufacturer part # 03-142BLK - CNC-machined aluminum replacement for OEM-type crimped-on cable lugs that plug into the handlebar lever bracket. Compatible with all Joker Machine hand controls; styling matches JX controls. Install with an Allen wrench. Made in the U.S.A.. For chrome, use part number 19-00439. , , NOTE: Covers 1/2" diameter lugs... 03-142BLK 1 on hand More Info/Options for Joker Machine Black JX Clutch Cable Trim Collar 03-142BLK

CLEARANCE! Was: $25.99 Now: $19.49 Harley-Davidson > Handlebars & Controls > Cables & Related Items: Arlen Ness 1 3/8 in. Radius Clutch Cable Clamp 03-161 Manufacturer: Arlen Ness Dennis Kirk Part #: H19180 Arlen Ness 1 3/8 in. Radius Clutch Cable Clamp: Manufacturer part # 03-161 - Precision-machined from aluminum for a great fit and detailed custom looks. Radius style. Chrome-plated finish. 1 3/8" size for handlebars and custom frames. Sold each. Made in the U.S.A... 03-161 2 on hand More Info/Options for Arlen Ness 1 3/8 in. Radius Clutch Cable Clamp 03-161