|
Drag Specialties Buffalo Drag Bar pH59764
|
|
 |
Drag Specialties Buffalo Drag Bar pH59764
|
This site contains about 138,282 documents.
|
|
View by:
Title
|
Brand
|
Category
|
Type
|
Price
|
Part Number
|
|
Page:
1
100
200
350
360
370
380
390
400
410
420
430
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
470
480
490
500
510
520
530
540
550
600
700
800
900
1,000
1,100
1,200
1,300
1,400
2,000
3,000
4,000
4,610
|
|
|
$164.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties 12.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59152 596144
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596144
Drag Specialties 12.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59152 - DennisKirk Part # 596144 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59152
Expected Soon
More Info/Options for Drag Specialties 12.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59152 596144
|
|
|
|
$210.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59153
Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59153 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59153
2 on hand
More Info/Options for Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153
|
|
|
|
$164.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153 596146
Manufacturer: Drag Specialties
Dennis Kirk Part #: 596146
Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # pH59153 - DennisKirk Part # 596146 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59153
Expected Soon
More Info/Options for Drag Specialties 16 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar pH59153 596146
|
|
|
|
$139.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Bagger II Style Bar for Road Kings pH59616
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59616
Drag Specialties Bagger II Style Bar for Road Kings: Manufacturer part # pH59616 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Thick, 1 1/4 in. risers are also available to complete the Buffalo look. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in.. Made in the U.S.A, , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes Note: OEM-style handlebar clamps will not fit bars with 1 1/4 in. risers. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameters, , Will not fit 08-09 Harley Davidson Touring Models (doesn't have notches in bar for electronic throttle). pH59616
2 on hand
More Info/Options for Drag Specialties Bagger II Style Bar for Road Kings pH59616
|
|
|
|
|
|
$89.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo Drag Bar pH59764
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59764
Drag Specialties Buffalo Drag Bar: Manufacturer part # pH59764 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. Made in the U.S.A., , Bottom bar in photo, , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/8 in.Knurled. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , NOTE: Will not fit Touring 08-09 models. pH59764
1 on hand
More Info/Options for Drag Specialties Buffalo Drag Bar pH59764
|
|
|
|
$89.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo Drag Bar for Springers pH59765
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59765
Drag Specialties Buffalo Drag Bar for Springers: Manufacturer part # pH59765 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look (accepts 1 in. diameter handlebars only). Made in the U.S.A., , Top handlebar in photo, , 1" Diameter Clamping Width: 6-3/4 in., Inside Width of Knurling/outside: 4-1/16 in. / 5-7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , NOTE: Will not fit Touring 08-09 models. pH59765
Expected Soon
More Info/Options for Drag Specialties Buffalo Drag Bar for Springers pH59765
|
|
|
|
$149.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo Classic Style Bar pH59766
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59766
Drag Specialties Buffalo Classic Style Bar: Manufacturer part # pH59766 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look (accepts 1 in. diameter handlebars only). Made in the U.S.A. Bottom bar in photo, , 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/outside: 2-3/4 in. / 4-1/4 in., Drilled, Dimpled and Knurling NOTE: OEM-style handlebar clamps will not fit bars with 1 1/4 in. risers. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , NOTE: Will not fit Touring 08-09 models. pH59766
1 on hand
More Info/Options for Drag Specialties Buffalo Classic Style Bar pH59766
|
|
|
|
$149.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo Bagger Style Bar pH59767
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59767
Drag Specialties Buffalo Bagger Style Bar: Manufacturer part # pH59767 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A. Handlebar is second up from bottom in Photo, , 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/outside: 2-3/4 in. / 4-1/4 in., Drilled and Knurling. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , Will not fit 08 Harley Davidson Touring Models (doesn't have notches in bar for electronic throttle), , NOTE: Will not fit Touring 08-09 models. pH59767
1 on hand
More Info/Options for Drag Specialties Buffalo Bagger Style Bar pH59767
|
|
|
|
$149.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo Bagger Style Bar for Road King pH59768
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59768
Drag Specialties Buffalo Bagger Style Bar for Road King: Manufacturer part # pH59768 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A.. Bar is second down from top in photo, , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , Will not fit 08 Harley Davidson Touring Models (doesn't have notches in bar for electronic throttle), , NOTE: Will not fit Touring 08-09 models. pH59768
1 on hand
More Info/Options for Drag Specialties Buffalo Bagger Style Bar for Road King pH59768
|
|
|
|
$149.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo Bagger Style Bar for Springers pH59769
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59769
Drag Specialties Buffalo Bagger Style Bar for Springers: Manufacturer part # pH59769 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A.. Bar is drilled and knurled. Knurling is 5 in. on center, , This is the top bar in photo, , 1" Diameter Clamping Width: 6 3/4 in., Inside Width of Knurling/outside: 4 1/16 in. / 5 7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , NOTE: Will not fit Touring 08-09 models. pH59769
1 on hand
More Info/Options for Drag Specialties Buffalo Bagger Style Bar for Springers pH59769
|
|
|
|
$149.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo 9 1/2 in. Apehanger Bar pH59770
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59770
Drag Specialties Buffalo 9 1/2 in. Apehanger Bar: Manufacturer part # pH59770 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A., , 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameters, , NOTE: Will not fit Touring 08-09 models. pH59770
1 on hand
More Info/Options for Drag Specialties Buffalo 9 1/2 in. Apehanger Bar pH59770
|
|
|
|
|
|
|
|
$149.95
Harley-Davidson > Handlebars & Controls > 1-1/4in. Handlebars - conventional: Drag Specialties Buffalo 12 1/2 in. Apehanger Bar pH59773
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59773
Drag Specialties Buffalo 12 1/2 in. Apehanger Bar: Manufacturer part # pH59773 - Designed for maximum comfort - these are the ultimate 1 1/4 in. diameter handlebars. Flame bars feature an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Available with a show-chrome or gloss black finish. Springer-style bars work with the OEM Springer risers and handlebar clamps; have 4 3/ in. centered knurling for a smooth, finished look. Billet gauge mounts for T-bars are available separately to fit 86-09 and mini-style gauges. Thick, 1 1/4 in. risers are also available to complete the Buffalo look (accepts 1 in.. Buffalo handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Standard bars have 5 1/8 in. clamp area width. Springer bars have 6 3/4 in. clamp area width. T-bars have 3 1/2 in. center-to-center mount holes. Will not fit Touring models 08-09. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models., , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars., , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. pH59773
4 on hand
More Info/Options for Drag Specialties Buffalo 12 1/2 in. Apehanger Bar pH59773
|
|
|
| |
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS