TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Easy Up EZ-Up -1 in, 4 in, Easy Up EZ-Up -3, EZ-Up Center Stand p507264

$210.99 Harley-Davidson > Frames > Kickstands & Components: Matt Hotch Designs Bent Springless Weld-on Kickstand p506310 506312 Manufacturer: Matt Hotch Designs Dennis Kirk Part #: 506312 Matt Hotch Designs Bent Springless Weld-on Kickstand: Manufacturer part # p506310 - DennisKirk Part # 506312 - Clean-looking kickstands with hidden internal spring. Measure 8" L from the center of the mounting hole to the first bend at the bottom. Weld-on styles are available in straight or bent design for custom applications. Made in the U.S.A.. , NOTE: Kickstands are not designed as support when using a kickstarter., NOTE: Frame diameter 1 1/2 in.. p506310 1 on hand More Info/Options for Matt Hotch Designs Bent Springless Weld-on Kickstand p506310 506312

$246.99 Harley-Davidson > Frames > Kickstands & Components: Easy Up EZ-Up Standard Center Stand p506940 Manufacturer: Easy Up Dennis Kirk Part #: 506940 Easy Up EZ-Up Standard Center Stand: Manufacturer part # p506940 - Raise your bike onto the stand without getting off it. Drive away convenience; just start your bike up, put it in gear and drive away. Bike weight is carried on bottom of frame rails. I-Glide bushings are self-lubricating and maintenance free. Mounts to bike in less than five minutes with just two bolts and a 3/4" wrench. Zinc-plated axle. Stainless steel springs. Includes hardware and instructions. Requires no frame modifications. Standard center stand fits H-D 89-08 touring bikes which have standard height suspensions and have the bowtie brace welded between frame rails directly below transmission. -3/4" center stand (50-6941) fits H-D touring bikes with a lowered rear only; this includes factory-lowered models like the FLHX and FLHRS or any bike lowered with the H-D Profile rear suspension lowering kit. -1" center stand (50-6942) fits H-D touring motorcycles with a lowered front and rear; this includes factory-lowered models like the FLHX and FLHRS or any touring model lowered with the H-D Profile front and rear suspension lowering kit. , , Note: , For stand with chrome access arm use 50-7263.. p506940 1 on hand More Info/Options for Easy Up EZ-Up Standard Center Stand p506940

$246.99 Harley-Davidson > Frames > Kickstands & Components: Easy Up EZ-Up -1 in. Center Stand p506940 Manufacturer: Easy Up Dennis Kirk Part #: 506942 Easy Up EZ-Up -1 in. Center Stand: Manufacturer part # p506940 - Raise your bike onto the stand without getting off it. Drive away convenience; just start your bike up, put it in gear and drive away. Bike weight is carried on bottom of frame rails. I-Glide bushings are self-lubricating and maintenance free. Mounts to bike in less than five minutes with just two bolts and a 3/4" wrench. Zinc-plated axle. Stainless steel springs. Includes hardware and instructions. Requires no frame modifications. Standard center stand (50-6940) fits H-D 89-08 touring bikes which have standard height suspensions and have the bowtie brace welded between frame rails directly below transmission. -3/4" center stand (50-6941) fits H-D touring bikes with a lowered rear only; this includes factory-lowered models like the FLHX and FLHRS or any bike lowered with the H-D Profile rear suspension lowering kit. -1" center stand(50-6942) fits H-D touring motorcycles with a lowered front and rear; this includes factory-lowered models like the FLHX and FLHRS or any touring model lowered with the H-D Profile front and rear suspension lowering kit.. p506940 1 on hand More Info/Options for Easy Up EZ-Up -1 in. Center Stand p506940

$246.99 Harley-Davidson > Frames > Kickstands & Components: Easy Up EZ-Up -3/4 in. Center Stand p506940 Manufacturer: Easy Up Dennis Kirk Part #: 506941 Easy Up EZ-Up -3/4 in. Center Stand: Manufacturer part # p506940 - Raise your bike onto the stand without getting off it. Drive away convenience; just start your bike up, put it in gear and drive away. Bike weight is carried on bottom of frame rails. I-Glide bushings are self-lubricating and maintenance free. Mounts to bike in less than five minutes with just two bolts and a 3/4" wrench. Zinc-plated axle. Stainless steel springs. Includes hardware and instructions. Requires no frame modifications. Standard center stand (50-6940) fits H-D 89-08 touring bikes which have standard height suspensions and have the bowtie brace welded between frame rails directly below transmission. -3/4" center stand(50-6941) fits H-D touring bikes with a lowered rear only; this includes factory-lowered models like the FLHX and FLHRS or any bike lowered with the H-D Profile rear suspension lowering kit. -1" center stand (50-6942) fits H-D touring motorcycles with a lowered front and rear; this includes factory-lowered models like the FLHX and FLHRS or any touring model lowered with the H-D Profile front and rear suspension lowering kit. , , Note: , For stand with chrome access arm use 50-7264.. p506940 1 on hand More Info/Options for Easy Up EZ-Up -3/4 in. Center Stand p506940

$1.99 Harley-Davidson > Frames > Kickstands & Components: Dennis Kirk, Inc. Kickstand Pad p507261 Manufacturer: Dennis Kirk, Inc. Dennis Kirk Part #: 507261 Dennis Kirk, Inc. Kickstand Pad: Manufacturer part # p507261 - Designed to distribute your bikes weight so the stand will not sink into hot asphalt, dirt or grass. Available in red. 3 1/4 in. W x 5 in. L x 1/4 in. Thick. Sold each.. p507261 More than 10 on hand More Info/Options for Dennis Kirk, Inc. Kickstand Pad p507261

$274.99 Harley-Davidson > Frames > Kickstands & Components: WheelDock Standard EZ-Up Center Stand p507263 Manufacturer: WheelDock Dennis Kirk Part #: 507263 WheelDock Standard EZ-Up Center Stand: Manufacturer part # p507263 - Raise bike onto center stand while rider is still on bike. Simple to get off stand, too; just place bike in gear and drive away. Load carried entirely on bottom of frame rails. Maintenance free with I-Glide self-lubricating bushing at pivot locations. Mounts to frame with two bolts in less than five minutes with a 3/4 in. wrench. Zinc-plated axle and stainless steel springs. All hardware and illustrated instructions included. No frame or bike modification required. Standard center stand fits the standard height suspensions on 89-08 H-D touring bikes that have the bowtie brace welded between frame rails directly below transmission. , , Included Items:. , 1. (1) Center stand. , 2. (2) 1/2"-13 x 1" hex head bolts. , 3. (2) 1/2"-13 nut plates. , 4. (2) 1/2" flat washers. , 5. (2) 1/2" lock washers. , , Note: Has chrome access arm, for stand with black access arm use 50-6940. , Standard center stand fits H-D 89-08 touring bikes which have standard height suspensions and have the bowtie brace welded between frame rails directly below transmission. , -3/4" center stand (50-7264) fits H-D touring bikes with a lowered rear only; this includes factory-lowered models like the FLHX qand FLHRS or any bike lowered wtih the H-D Profile rear suspension lowering kit. , -1" center stand (50-7265) fits H-D touring motorcycles with a lowered front and rear; this includes factory-lowered models like the FLHX and FLHRS or any touring model lowered with the H-D profile front and rear suspension lowering kit.. p507263 Expected Soon More Info/Options for WheelDock Standard EZ-Up Center Stand p507263

$274.99 Harley-Davidson > Frames > Kickstands & Components: WheelDock -3/4 in. EZ-Up Center Stand p507264 Manufacturer: WheelDock Dennis Kirk Part #: 507264 WheelDock -3/4 in. EZ-Up Center Stand: Manufacturer part # p507264 - Raise bike onto center stand while rider is still on bike. Simple to get off stand, too; just place bike in gear and drive away. Load carried entirely on bottom of frame rails. Maintenance free with I-Glide self-lubricating bushing at pivot locations. Mounts to frame with two bolts in less than five minutes with a 3/4 in. wrench. Zinc-plated axle and stainless steel springs. All hardware and illustrated instructions included. No frame or bike modification required. -3/4 in. center stand fits H-D touring bikes that are lowered in the rear only; for factory-lowered models including the FLHX and FLHRS or any bike that has been lowered with the H-D Profile rear suspension lowering kit. , , Note: Has chrome access arm, for stand with black access arm use 50-6941. , Standard center stand fits H-D 89-08 touring bikes which have standard height suspensions and have the bowtie brace welded between frame rails directly below transmission. , -3/4" center stand (50-7264) fits H-D touring bikes with a lowered rear only; this includes factory-lowered models like the FLHX qand FLHRS or any bike lowered wtih the H-D Profile rear suspension lowering kit. , -1" center stand (50-7265) fits H-D touring motorcycles with a lowered front and rear; this includes factory-lowered models like the FLHX and FLHRS or any touring model lowered with the H-D profile front and rear suspension lowering kit.. p507264 1 on hand More Info/Options for WheelDock -3/4 in. EZ-Up Center Stand p507264

$274.99 Harley-Davidson > Frames > Kickstands & Components: WheelDock -1 in. EZ-Up Center Stand p507265 Manufacturer: WheelDock Dennis Kirk Part #: 507265 WheelDock -1 in. EZ-Up Center Stand: Manufacturer part # p507265 - Raise bike onto center stand while rider is still on bike. Simple to get off stand, too; just place bike in gear and drive away. Load carried entirely on bottom of frame rails. Maintenance free with I-Glide self-lubricating bushing at pivot locations. Mounts to frame with two bolts in less than five minutes with a 3/4 in. wrench. Zinc-plated axle and stainless steel springs. All hardware and illustrated instructions included. No frame or bike modification required. -1 in. center stand fits H-D touring motorcycles that have been lowered in the front and rear; for factory-lowered models including the FLHX and FLHRS and any touring model that has been lowered with the H-D Profile front and rear suspension lowering kits. , , Note: Has chrome access arm, for stand with black access arm use 50-6942. , Standard center stand fits H-D 89-08 touring bikes which have standard height suspensions and have the bowtie brace welded between frame rails directly below transmission. , -3/4" center stand (50-7264) fits H-D touring bikes with a lowered rear only; this includes factory-lowered models like the FLHX qand FLHRS or any bike lowered wtih the H-D Profile rear suspension lowering kit. , -1" center stand (50-7265) fits H-D touring motorcycles with a lowered front and rear; this includes factory-lowered models like the FLHX and FLHRS or any touring model lowered with the H-D profile front and rear suspension lowering kit.. p507265 2 on hand More Info/Options for WheelDock -1 in. EZ-Up Center Stand p507265

$22.99 Harley-Davidson > Frames > Kickstands & Components: LA Choppers Kickstand Angle Plate p507291 Manufacturer: LA Choppers Dennis Kirk Part #: 507291 LA Choppers Kickstand Angle Plate: Manufacturer part # p507291 - For use on lowered bikes. Allows you to adjust the angle of your kickstand quickly and easily. Sold each.. p507291 3 on hand More Info/Options for LA Choppers Kickstand Angle Plate p507291

$299.95 Harley-Davidson > Frames > Kickstands & Components: West Coast Choppers Weld-On Kickstand p507415 Manufacturer: West Coast Choppers Dennis Kirk Part #: 507415 West Coast Choppers Weld-On Kickstand: Manufacturer part # p507415 - Machined from 6061 polished aluminum. Features an internal spring that can be located out of sight for a clean and custom look. Requires modification to the frame; 1018 steel mounting tab must be welded to the frame. Fits 1 1/8 in. frame tubing. Measures 11 1/2 in. in length. Made in the U.S.A... p507415 1 on hand More Info/Options for West Coast Choppers Weld-On Kickstand p507415

$180.99 Harley-Davidson > Frames > Kickstands & Components: Paul Yaffe Originals Bolt-On Springless Kickstand PYKS Manufacturer: Paul Yaffe Originals Dennis Kirk Part #: 491931 Paul Yaffe Originals Bolt-On Springless Kickstand: Manufacturer part # PYKS - Bolt-on kickstand uses no spring for a smooth look. Chrome-plated finish. For Big Twin 36-99.. PYKS 1 on hand More Info/Options for Paul Yaffe Originals Bolt-On Springless Kickstand PYKS

$7.95 Harley-Davidson > Frames > Kickstands & Components: T-Bags Kickstand Boot TB6000KS Manufacturer: T-Bags Dennis Kirk Part #: 505579 T-Bags Kickstand Boot: Manufacturer part # TB6000KS - Designed to distribute your bike's weight so the stand won't sink into hot asphalt, dirt or grass.. TB6000KS More than 10 on hand More Info/Options for T-Bags Kickstand Boot TB6000KS

$1025.99 Harley-Davidson > Frames > Rigid Style: Paughco 2 in./4 in. Stretch XL Rigid Frame D120EB24 Manufacturer: Paughco Dennis Kirk Part #: H58374 Paughco 2 in./4 in. Stretch XL Rigid Frame: Manufacturer part # D120EB24 - Crafted from 1" tubing and includes a 3/4" rear axle. Features a 2" stretch in the backbone and 4" stretch in the downtubes with a 40 degree rake, requires a 12" -over (39") front fork, does not have fuel tank mounts and uses 5" or 6" rear fender. Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive, XL forward controls or stock mid-controls and most exhaust systems. PM or GMA rigid rear brake caliper kits must be used. Frames require an oil tank and battery box that must be purchased separately (Tank - H49-1137 and Battery Box - H20-901). Includes Manufactures Statement of Origin. For use with XL 86-03 motors. This item ships in 3-4 days after order is placed Axle not included. D120EB24 1 on hand More Info/Options for Paughco 2 in./4 in. Stretch XL Rigid Frame D120EB24

$1025.99 Harley-Davidson > Frames > Rigid Style: Paughco 3 in./6 in. Stretch XL Rigid Frame D120EB36 Manufacturer: Paughco Dennis Kirk Part #: H58375 Paughco 3 in./6 in. Stretch XL Rigid Frame: Manufacturer part # D120EB36 - Crafted from 1" tubing and includes a 3/4" rear axle. Features a 3" stretch in the backbone and 6" stretch in the down tubes with a 40° rake, - requires 15"-over (42") front fork - does not have fuel tank mounts and uses a 5" or 6" rear fender. Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive, XL forward controls or stock mid-controls and most exhaust systems. PM or GMA rigid rear brake caliper kits must be used. Frames require an oil tank and battery box that must be purchased separately (Tank - H49-1137 and Battery Box - H20-901). Includes Manufactures Statement of Origin. For use with 86-03 XL motors This item ships in 3-4 days after order is placed Axle not included. D120EB36 1 on hand More Info/Options for Paughco 3 in./6 in. Stretch XL Rigid Frame D120EB36

$802.99 Harley-Davidson > Frames > Rigid Style: Paughco 0 in. Stretch XL Rigid Frame DSS120EF Manufacturer: Paughco Dennis Kirk Part #: H58372 Paughco 0 in. Stretch XL Rigid Frame: Manufacturer part # DSS120EF - Crafted from 1" tubing and includes a 3/4" rear axle. Features a 0" stretch and 30° rake, uses stock length XL front fork (31"), accepts a flat-side Fat Bob gas tank and uses a 5" or 6" rear fender. Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive, XL forward controls or stock mid-controls and most exhaust systems. PM or GMA rigid rear brake caliper kits must be used. Frames require an oil tank and battery box that must be purchased separately (Tank - H49-1137 and Battery Box - H20-901). Includes Manufactures Statement of Origin. For use with 86-03 XL motors This item ships in 3-4 days after order is placed Axle not included. DSS120EF 1 on hand More Info/Options for Paughco 0 in. Stretch XL Rigid Frame DSS120EF

$1579.99 Harley-Davidson > Frames > Rigid Style: Chopper Guys Bobber 130 Rigid Frame Kit FRMFGR Manufacturer: Chopper Guys Dennis Kirk Part #: 493101 Chopper Guys Bobber 130 Rigid Frame Kit: Manufacturer part # FRMFGR - Lightweight construction. CNC billet construction of frame components. Accepts stock Softail-style oil tank and rear caliper. Fat Guy Custom Rigid is stretched 1 3/4" and has a rake angle of 35º. , , Rigid frames will accept Evo and Shovelhead engines, or Panheads with upper mount modifications. This item ships 3-4 days after the order is placed.. FRMFGR 1 on hand More Info/Options for Chopper Guys Bobber 130 Rigid Frame Kit FRMFGR

$1579.99 Harley-Davidson > Frames > Rigid Style: Chopper Guys Fat Guy Custom Rigid Frame Kit FRMFGRC Manufacturer: Chopper Guys Dennis Kirk Part #: H491016 Chopper Guys Fat Guy Custom Rigid Frame Kit: Manufacturer part # FRMFGRC - Lightweight construction. CNC billet construction of frame components. Accepts stock Softail-style oil tank and rear caliper. Fat Guy Custom Rigid is stretched 1 3/4" and has a rake angle of 35º. Designed for 180/200 rear tire, , Rigid frames will accept Evo and Shovelhead engines, or Panheads with upper mount modifications. This item ships 3-4 days after the order is placed.. FRMFGRC