Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Woodys Extender Trail III Carbides 031829

$60.99 Woodys Trail Blazer IV Carbide Wear Rods 032052 Dennis Kirk Part #: 032052 Woodys Trail Blazer IV Carbide Wear Rods 032052: Manufacturer part # TPI4-1225 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI4-1225 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032052

$54.99 Woodys Trail Blazer IV Carbide Wear Rods 031689 Dennis Kirk Part #: 031689 Woodys Trail Blazer IV Carbide Wear Rods 031689: Manufacturer part # TPI4-9125 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI4-9125 3 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031689

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031234 Dennis Kirk Part #: 031234 Woodys Trail Blazer IV Carbide Wear Rods 031234: Manufacturer part # TAT4-7050 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-7050 6 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031234

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031685 Dennis Kirk Part #: 031685 Woodys Trail Blazer IV Carbide Wear Rods 031685: Manufacturer part # TAT4-9975 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-9975 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031685

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031248 Dennis Kirk Part #: 031248 Woodys Trail Blazer IV Carbide Wear Rods 031248: Manufacturer part # TYV4-6450 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6450 10 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031248

$53.99 Woodys Trail Blazer IV Carbide Wear Rods 032046 Dennis Kirk Part #: 032046 Woodys Trail Blazer IV Carbide Wear Rods 032046: Manufacturer part # TSD4-9255 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-9255 10 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032046

$54.99 Woodys Trail Blazer IV Carbide Wear Rods 031897 Dennis Kirk Part #: 031897 Woodys Trail Blazer IV Carbide Wear Rods 031897: Manufacturer part # TPI4-7125 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI4-7125 7 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031897

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031237 Dennis Kirk Part #: 031237 Woodys Trail Blazer IV Carbide Wear Rods 031237: Manufacturer part # TSD4-6175 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-6175 5 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031237

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031337 Dennis Kirk Part #: 031337 Woodys Trail Blazer IV Carbide Wear Rods 031337: Manufacturer part # TSD4-8250 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-8250 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031337

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031778 Dennis Kirk Part #: 031778 Woodys Trail Blazer IV Carbide Wear Rods 031778: Manufacturer part # TYV4-6580 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6580 8 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031778

$48.99 Woodys Extender Trail III Carbides 031851 Dennis Kirk Part #: 031851 Woodys Extender Trail III Carbides 031851: Manufacturer part # EYV3-5500 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EYV3-5500 2 on Hand More Info/Options for Woodys Extender Trail III Carbides 031851

$48.99 Woodys Extender Trail III Carbides 031832 Dennis Kirk Part #: 031832 Woodys Extender Trail III Carbides 031832: Manufacturer part # EAT3-9975 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EAT3-9975 5 on Hand More Info/Options for Woodys Extender Trail III Carbides 031832

$48.99 Woodys Extender Trail III Carbides 031841 Dennis Kirk Part #: 031841 Woodys Extender Trail III Carbides 031841: Manufacturer part # ESD3-8150 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ESD3-8150 5 on Hand More Info/Options for Woodys Extender Trail III Carbides 031841

$41.99 Woodys Extender Trail III Carbides 031855 Dennis Kirk Part #: 031855 Woodys Extender Trail III Carbides 031855: Manufacturer part # EPI3-3180 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EPI3-3180 5 on Hand More Info/Options for Woodys Extender Trail III Carbides 031855

$48.99 Woodys Extender Trail III Carbides 031837 Dennis Kirk Part #: 031837 Woodys Extender Trail III Carbides 031837: Manufacturer part # ESD3-6150 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ESD3-6150 2 on Hand More Info/Options for Woodys Extender Trail III Carbides 031837

$45.99 Woodys Extender Trail III Carbides 032043 Dennis Kirk Part #: 032043 Woodys Extender Trail III Carbides 032043: Manufacturer part # ESD3-9550 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ESD3-9550 2 on Hand More Info/Options for Woodys Extender Trail III Carbides 032043

$48.99 Woodys Extender Trail III Carbides 031845 Dennis Kirk Part #: 031845 Woodys Extender Trail III Carbides 031845: Manufacturer part # EYV3-6300 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EYV3-6300 3 on Hand More Info/Options for Woodys Extender Trail III Carbides 031845

$41.99 Woodys Extender Trail III Carbides 031896 Dennis Kirk Part #: 031896 Woodys Extender Trail III Carbides 031896: Manufacturer part # EPI3-7125 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EPI3-7125 6 on Hand More Info/Options for Woodys Extender Trail III Carbides 031896

$48.99 Woodys Extender Trail III Carbides 031838 Dennis Kirk Part #: 031838 Woodys Extender Trail III Carbides 031838: Manufacturer part # ESD3-6175 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ESD3-6175 6 on Hand More Info/Options for Woodys Extender Trail III Carbides 031838

$48.99 Woodys Extender Trail III Carbides 031840 Dennis Kirk Part #: 031840 Woodys Extender Trail III Carbides 031840: Manufacturer part # ESD3-7150 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ESD3-7150 4 on Hand More Info/Options for Woodys Extender Trail III Carbides 031840

$48.99 Woodys Extender Trail III Carbides 031831 Dennis Kirk Part #: 031831 Woodys Extender Trail III Carbides 031831: Manufacturer part # EAT3-9850 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EAT3-9850 2 on Hand More Info/Options for Woodys Extender Trail III Carbides 031831

$48.99 Woodys Extender Trail III Carbides 031852 Dennis Kirk Part #: 031852 Woodys Extender Trail III Carbides 031852: Manufacturer part # ECA3-5000 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ECA3-5000 6 on Hand More Info/Options for Woodys Extender Trail III Carbides 031852

$46.99 Woodys Extender Trail III Carbides 031922 Dennis Kirk Part #: 031922 Woodys Extender Trail III Carbides 031922: Manufacturer part # ESD3-9450 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. ESD3-9450 4 on Hand More Info/Options for Woodys Extender Trail III Carbides 031922

$48.99 Woodys Extender Trail III Carbides 031849 Dennis Kirk Part #: 031849 Woodys Extender Trail III Carbides 031849: Manufacturer part # EYV3-6580 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some models require drilling extra holes in ski to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. EYV3-6580 6 on Hand More Info/Options for Woodys Extender Trail III Carbides 031849

$41.99 Woodys Extender Trail III Carbides 032010 Dennis Kirk Part #: 032010 Woodys Extender Trail III Carbides 032010: Manufacturer part # EPI3-1125 - 4 in. of 60 degree turning carbide; 1 1/2 in. carbide wear pads for extended life. Full-length hardweld between carbide inserts. 7/16 in. host bar, 5/16 in.studs are extra-long for easy ski skin mounting. , NOTE: Some