|
|
|
|
|
|
$98.99
Harley-Davidson > Forward Controls & Pegs > Footpegs & Hardware: Kuryakyn Small ISO-Pegs with Clevis & 1 in. Clamps 8030
Manufacturer: Kuryakyn
Dennis Kirk Part #: 505506
Kuryakyn Small ISO-Pegs with Clevis & 1 in. Clamps: Manufacturer part # 8030 - U.S. Pat # Des 411,440 This is our most popular style of highway pegs. Using our patented Magnum Quick Clamp, they are a snap to install and provide long-haul comfort. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, check out our adapter w/adjustable stop P/N 50-5503. Helpful Hint: If you are unsure of the diameter of the tubing on which you would like to install the highway pegs and do not have a dial at your disposal, here is an easy way to figure it out. You will need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1 in. apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8, 1-1/4, 1.35, 1-1/2 until you find one that will fit.. 8030
7 on hand
More Info/Options for Kuryakyn Small ISO-Pegs with Clevis & 1 in. Clamps 8030
|
|
|
|
$99.99
Harley-Davidson > Forward Controls & Pegs > Footpegs & Hardware: Kuryakyn Large ISO-Pegs with Clevis & 1 in. Clamps 8031
Manufacturer: Kuryakyn
Dennis Kirk Part #: 505507
Kuryakyn Large ISO-Pegs with Clevis & 1 in. Clamps: Manufacturer part # 8031 - U.S. Pat # Des 411,440 This is our most popular style of highway pegs. Using our patented Magnum Quick Clamp, they are a snap to install and provide long-haul comfort. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, check out our adapter w/adjustable stop P/N 50-5503. Helpful Hint: If you are unsure of the diameter of the tubing on which you would like to install the highway pegs and do not have a dial at your disposal, here is an easy way to figure it out. You will need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1 in. apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8, 1-1/4, 1.35, 1-1/2 until you find one that will fit.. 8031
More than 10 on hand
More Info/Options for Kuryakyn Large ISO-Pegs with Clevis & 1 in. Clamps 8031
|
|
|
|
$79.99
Harley-Davidson > Forward Controls & Pegs > Footpegs & Hardware: Kuryakyn Small ISO-Pegs with Clevis & 1 1/4 in. Clamps 8032
Manufacturer: Kuryakyn
Dennis Kirk Part #: H49657
Kuryakyn Small ISO-Pegs with Clevis & 1 1/4 in. Clamps: Manufacturer part # 8032 - U.S. Patent # DES 411,400 and U.S. Patent # DES 405,393 This is our most popular style of highway pegs. Using our patented Magnum Quick Clamp, they are a snap to install and provide long-haul comfort. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, check out our adapter w/adjustable stop P/N 50-5503. Helpful Hint: If you are unsure of the diameter of the tubing on which you would like to install the highway pegs and do not have a dial at your disposal, here is an easy way to figure it out. You will need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1 in. apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8, 1-1/4, 1.35, 1-1/2 until you find one that will fit., , Note: Small ISO pegs include clevis mount with 1 1/4 in. quick clamps and are not adjustable. For pegs with adjustable mounts order the small ISO pegs with offset mounts, Part Number H49654. 8032
4 on hand
More Info/Options for Kuryakyn Small ISO-Pegs with Clevis & 1 1/4 in. Clamps 8032
|
|
|
|
$79.99
Harley-Davidson > Forward Controls & Pegs > Footpegs & Hardware: Kuryakyn Large ISO-Pegs with Clevis & 1 1/4 in. Clamps 8033
Manufacturer: Kuryakyn
Dennis Kirk Part #: H49658
Kuryakyn Large ISO-Pegs with Clevis & 1 1/4 in. Clamps: Manufacturer part # 8033 - U.S. Patent # DES 411,400 and U.S. Patent # DES 405,393 This is our most popular style of highway pegs. Using our patented Magnum Quick Clamp, they are a snap to install and provide long-haul comfort. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, check out our adapter w/adjustable stop P/N 50-5503. Helpful Hint: If you are unsure of the diameter of the tubing on which you would like to install the highway pegs and do not have a dial at your disposal, here is an easy way to figure it out. You will need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge of the paper 1 in. apart. Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made. Fold the resulting flap of paper out of the way. Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening you've made in the edge of the paper. If the opening is too small, repeat the procedure enlarging the opening to 1-1/8, 1-1/4, 1.35, 1-1/2 until you find one that will fit., , Note: Large ISO pegs include clevis mount with 1 1/4 in. quick clamps and are not adjustable. For pegs with adjustable mounts, order the large ISO pegs with offset mounts, Part Number H49655. 8033
More than 10 on hand
More Info/Options for Kuryakyn Large ISO-Pegs with Clevis & 1 1/4 in. Clamps 8033
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS