TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Cycle Shack 2 in, BUB Staggered Exhaust System R51008CG

$298.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 Drag Pipes PHD237 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402302 Cycle Shack 2 Drag Pipes: Manufacturer part # PHD237 - Traditional-style drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. 2" pipes feature a stepped header design for increased performance when used on big-inch motors. Mounting bracket included. 2" pipes accept Cycle Shack heat shields only. Baffles sold separately--44-830. Slash-out tip. Made in the U.S.A.. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front head pipe. , 2. (1) Rear head pipe. , 3. (2) Mount tabs marked F&R. , 4. (2) 3/8 x 2 1/4 bolts with washers. , 5. (2) 5/16-18 T-bolt fasteners with locking nuts. , 6. (2) 5/16-18 x 1" hex bolts with washers. PHD237 1 on hand More Info/Options for Cycle Shack 2 Drag Pipes PHD237

CLEARANCE! Was: $361.99 Now: $217.19 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Slash-Cut Shotgun-Style M Pipes PHD239 SS Manufacturer: Cycle Shack Dennis Kirk Part #: 4400055 Cycle Shack 2 in. Slash-Cut Shotgun-Style M Pipes: Manufacturer part # PHD239 SS - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies with removable baffles. Includes mounting bracket. 2" pipes include rear heatshield, must reuse front. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD239 SS 1 on hand More Info/Options for Cycle Shack 2 in. Slash-Cut Shotgun-Style M Pipes PHD239 SS

$249.99 Harley-Davidson > Exhaust > Systems: Cycle Shack Slash-Cut 2 in. Drag Pipe PHD241 Manufacturer: Cycle Shack Dennis Kirk Part #: H44217 Cycle Shack Slash-Cut 2 in. Drag Pipe: Manufacturer part # PHD241 - Super-durable drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. Mounting bracket included. Optional baffles sold separately (use part no. 44-830). Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD241 2 on hand More Info/Options for Cycle Shack Slash-Cut 2 in. Drag Pipe PHD241

CLEARANCE! Was: $303.99 Now: $182.39 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Slash-Down Shotgun Drag Pipe PHD243 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4400057 Cycle Shack 2 in. Slash-Down Shotgun Drag Pipe: Manufacturer part # PHD243 SD - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Mounting bracket included for 95-06 models. Baffles sold separately (use part no. 44-830). Includes rear heatshield; must re-use OEM front heat shield. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing. PHD243 SD 1 on hand More Info/Options for Cycle Shack 2 in. Slash-Down Shotgun Drag Pipe PHD243 SD

$294.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Shotgun Drag Pipes PHD244 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402575 Cycle Shack 2 in. Shotgun Drag Pipes: Manufacturer part # PHD244 - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Slash-cut top. 2" pipes include heat shields. Baffles sold separately. Made in the U.S.A.. Optional baffle part number 44-830. 2 in. rear heat shield use part number 4403589. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD244 1 on hand More Info/Options for Cycle Shack 2 in. Shotgun Drag Pipes PHD244

$294.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Shotgun Drag Pipes PHD244 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402576 Cycle Shack 2 in. Shotgun Drag Pipes: Manufacturer part # PHD244 SD - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Slash-down tip. 2" pipes. Baffles sold separately -- 44-830. 2 in. rear heat shield use part number 4403589. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD244 SD 1 on hand More Info/Options for Cycle Shack 2 in. Shotgun Drag Pipes PHD244 SD

$349.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Drag Pipes PHD248 A Manufacturer: Cycle Shack Dennis Kirk Part #: 4402495 Cycle Shack 2 in. Drag Pipes: Manufacturer part # PHD248 A - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Straight-through chrome style and sound. 2" pipes have a stepped header design. Slash-down tip. Includes channel mounts and hardware to mount pipes directly to OEM brackets. 40" long. Baffles sold separately -- 44-830. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) Drag pipes. , 2. (2) Mounting brackets. , 3. (2) Heat shields. , 4. (1) Exhaust clamp. , 5. (4) Hose clamps. , 6. (4) 5/16"-18 T-bolts. , 7. (1) 5/16"-18 x 1 1/8" hex bolt. , 8. (2) 5/16"-18 x 3/4" hex bolts. , 9. (6) 5/16"-18 lock nuts.. PHD248 A 1 on hand More Info/Options for Cycle Shack 2 in. Drag Pipes PHD248 A

$203.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Slash-Cut Drag Pipes PHD249 Manufacturer: Cycle Shack Dennis Kirk Part #: H44148 Cycle Shack 2 in. Slash-Cut Drag Pipes: Manufacturer part # PHD249 - Add style and performance to your Dyna Glide. Designed specifically for Dyna Glide models. Pipes have a stepped header design for added performance when used on big-inch motors.. Optional baffles are sold separately(use Part No. 44-830). Made in the USA. NOTE: Mounts to OEM bracket on 95-05 models. 91-94 models must use Part No. H27-522 (black) mounting bracket. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing.See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. PHD249 1 on hand More Info/Options for Cycle Shack 2 in. Slash-Cut Drag Pipes PHD249

$436.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Slash Down M Pipe Exhaust System PHD260 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402309 Cycle Shack 2 in. Slash Down M Pipe Exhaust System: Manufacturer part # PHD260 SD - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-down tip. Heat shields included. , , NOTE: , Baffles are removable on Slash-cut systems only., , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will he.. , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nutslp to prevent or remove the blueing.. PHD260 SD 1 on hand More Info/Options for Cycle Shack 2 in. Slash Down M Pipe Exhaust System PHD260 SD

$436.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Slash Out M Pipe Exhaust System PHD260 SS Manufacturer: Cycle Shack Dennis Kirk Part #: 4402308 Cycle Shack 2 in. Slash Out M Pipe Exhaust System: Manufacturer part # PHD260 SS - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-out tip. Heat shields included. , , NOTE: , Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD260 SS 1 on hand More Info/Options for Cycle Shack 2 in. Slash Out M Pipe Exhaust System PHD260 SS

$436.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Tapered M Pipe Exhaust System PHD260 T Manufacturer: Cycle Shack Dennis Kirk Part #: 4402307 Cycle Shack 2 in. Tapered M Pipe Exhaust System: Manufacturer part # PHD260 T - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Tapered tip. Heat shields included. , , NOTE: Baffles are removable on Slash-cut systems only., , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD260 T 1 on hand More Info/Options for Cycle Shack 2 in. Tapered M Pipe Exhaust System PHD260 T

$227.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Drag Pipes PHD261 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402312 Cycle Shack 2 in. Drag Pipes: Manufacturer part # PHD261 - These one-piece 40 in. pipes mount to the OEM bracket. 2 in. pipes have a stepped header design for added performance when used on big-inch motors. Fit all XL models 07-08 including 883C/1200C. Slash-out tip. Baffles sold separately-44830. Includes heat shields. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front pipe. , 2. (1) Rear pipe. , 3. (4) T-bolts. PHD261 1 on hand More Info/Options for Cycle Shack 2 in. Drag Pipes PHD261

$227.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 2 in. Drag Pipes PHD261 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402313 Cycle Shack 2 in. Drag Pipes: Manufacturer part # PHD261 SD - These one-piece 40 in. pipes mount to the OEM bracket. 2 in. pipes have a stepped header design for added performance when used on big-inch motors. Fit all XL models 07-08 including 883C/1200C. Slash-down tip. Baffles sold separately-44830. Includes heat shields. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD261 SD 1 on hand More Info/Options for Cycle Shack 2 in. Drag Pipes PHD261 SD

$857.95 Harley-Davidson > Exhaust > Systems: BUB Rinehart Staggered Exhaust System R51007CG Manufacturer: BUB Dennis Kirk Part #: H44045 BUB Rinehart Staggered Exhaust System: Manufacturer part # R51007CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Rinehart has designed and built exhaust systems for legendary NASCAR® race teams including Richard Childress Racing, Dale Earnhardt Incorporated, Roush Racing and Morgan McClure. Systems are manufactured by BUB Enterprises for unmatched quality, fit and finish. Headers feature multi-bend radius technology and a three-step size increase: 1 3/4 in. at the head, to 1 7/8 in. mid and then a 2 in. finish. Header pipes are covered by permanently mounted 2½ in.-diameter full-length heat shields for a never-bluing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you are running your own victory lap at the Brickyard - a powerful staccato rumble reminiscent of a NASCAR® champion. Systems are highlighted by the polished black anodized billet aluminum end caps engraved with the Rinehart logo. Repl. end cap black - 44-9076. Optional end cap chrome - 44-9077. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R51007CG 1 on hand More Info/Options for BUB Rinehart Staggered Exhaust System R51007CG

CLEARANCE! Was: $857.95 Now: $514.77 Harley-Davidson > Exhaust > Systems: BUB Staggered Exhaust System R51008CG Manufacturer: BUB Dennis Kirk Part #: H44361 BUB Staggered Exhaust System: Manufacturer part # R51008CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Rinehart has designed and built exhaust systems for legendary NASCAR race teams including Richard Childress Racing, Dale Earnhardt Incorporated, Roush Racing and Morgan McClure. Systems are manufactured by BUB Enterprises for unmatched quality, fit and finish. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in.-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Repl. end cap Black - 44-9076. Optional end cap Chrome - 44-9077. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R51008CG 4 on hand More Info/Options for BUB Staggered Exhaust System R51008CG

$857.95 Harley-Davidson > Exhaust > Systems: BUB Staggered Exhaust System R52001CG Manufacturer: BUB Dennis Kirk Part #: 449610 BUB Staggered Exhaust System: Manufacturer part # R52001CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in.-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - 44-9076. Optional end cap chrome - 44-9077. NOTE: Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it. For flush-style exhaust order Part No. 44-9609, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52001CG