TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Cycle Shack 2 in, 4 in, Cycle Shack 1 3, Cycle Shack Slash-Cut 2 in

$317.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Slash Down Shotgun-Style M Pipe Exhaust System PHD142 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402324 Cycle Shack 1 3/4 in. Slash Down Shotgun-Style M Pipe Exhaust System: Manufacturer part # PHD142 SD - Made from one continuous piece of nickel-chrome finished 16-gauge tubing for traditional good looks. Feature 2 1/2" muffler bodies with removable baffles (except tapered style). O2 sensor bungs for 07-09 models are included. Original factory heat shields are retained. 1 3/4" pipes include mounting brackets and removable steel baffles. Slash-down tip. Made in the U.S.A., , Included Items: , 1. (2) Drag Pipes, 2. (2) Mounting Brackets, 3. (2) Exhaust Clamps, 4. (4) 5/16"-18 T-Bolts, 5. (2) 5/16"-18 x 1" Hex Bolts, 6. (6) 5/16"-18 Lock Nuts, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD142 SD 2 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Down Shotgun-Style M Pipe Exhaust System PHD142 SD

$317.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Slash Out Shotgun-Style M Pipe Exhaust System PHD142 SS Manufacturer: Cycle Shack Dennis Kirk Part #: 4402323 Cycle Shack 1 3/4 in. Slash Out Shotgun-Style M Pipe Exhaust System: Manufacturer part # PHD142 SS - Made from one continuous piece of nickel-chrome finished 16-gauge tubing for traditional good looks. Feature 2 1/2" muffler bodies with removable baffles (except tapered style). O2 sensor bungs for 07-09 models are included. Original factory heat shields are retained. 1 3/4" pipes include mounting brackets and removable steel baffles. Slash-out tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD142 SS 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Out Shotgun-Style M Pipe Exhaust System PHD142 SS

$317.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Tapered Shotgun-Style M Pipe Exhaust System PHD142 T Manufacturer: Cycle Shack Dennis Kirk Part #: 4402322 Cycle Shack 1 3/4 in. Tapered Shotgun-Style M Pipe Exhaust System: Manufacturer part # PHD142 T - Made from one continuous piece of nickel-chrome finished 16-gauge tubing for traditional good looks. Feature 2 1/2" muffler bodies with removable baffles (except tapered style). O2 sensor bungs for 07-09 models are included. Original factory heat shields are retained. 1 3/4" pipes include mounting brackets and removable steel baffles. Tapered tip. Made in the U.S.A., , Included Items: , 1. (1) Drag Pipe, 2. (1) Head Pipe, 3. (1) Muffler, 4. (2) Exhaust Clamps, 5. (4) Mounting Brackets, 6. (4) 5/16"-18 x 1" T-Bolts, 7. (2) 5/16"-18 x 1" Hex Head Bolts, 8. (6) 5/16"-18 Lock Nuts, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD142 T 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Tapered Shotgun-Style M Pipe Exhaust System PHD142 T

$281.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD144 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402325 Cycle Shack 1 3/4 in. Shotgun Drag Pipes: Manufacturer part # PHD144 - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. 1 3/4" pipes accept OEM heat shields. Slash-out tip. Baffles sold separately -- 27-381. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD144 2 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD144

$189.99 Harley-Davidson > Exhaust > Systems: Cycle Shack Slash-Cut 1 3/4 in. Shotgun Drag Pipe PHD147 A Manufacturer: Cycle Shack Dennis Kirk Part #: H44395 Cycle Shack Slash-Cut 1 3/4 in. Shotgun Drag Pipe: Manufacturer part # PHD147 A - Each pipe made of one continuous piece of 16-gauge tubing. 90-94 models need no additional mounting brackets or clamps; attach right to OEM muffler brackets and accept the original factory heat shields. Mount bracket included for 95-06 models. Baffles sold separately (use part no. 27-381). Made in the U.S.A.. NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. PHD147 A 1 on hand More Info/Options for Cycle Shack Slash-Cut 1 3/4 in. Shotgun Drag Pipe PHD147 A

$189.99 Harley-Davidson > Exhaust > Systems: Cycle Shack Straight-Cut 1 3/4 in. Shotgun Drag Pipe PHD147 SA Manufacturer: Cycle Shack Dennis Kirk Part #: H44421 Cycle Shack Straight-Cut 1 3/4 in. Shotgun Drag Pipe: Manufacturer part # PHD147 SA - Each pipe made of one continuous piece of 16-gauge tubing. 90-94 models need no additional mounting brackets or clamps; attach right to OEM muffler brackets and accept the original factory heat shields. Mount bracket included for 95-06 models. Baffles sold separately (use part no. 27-381). Made in the U.S.A.. NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. PHD147 SA 1 on hand More Info/Options for Cycle Shack Straight-Cut 1 3/4 in. Shotgun Drag Pipe PHD147 SA

$251.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Slash-Cut Drag Pipes PHD148 Manufacturer: Cycle Shack Dennis Kirk Part #: H25063 Cycle Shack 1 3/4 in. Slash-Cut Drag Pipes: Manufacturer part # PHD148 - Straight-through chrome pipe set includes channel mounts and hardware for mounting to factory brackets. Pipes measure 40 in.. For optional baffles order Part No. 27381. Made in the USA. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. PHD148 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash-Cut Drag Pipes PHD148

$256.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Drag Pipes PHD148 A Manufacturer: Cycle Shack Dennis Kirk Part #: 4402494 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD148 A - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Straight-through chrome style and sound. Slash-down tip. Includes channel mounts and hardware to mount pipes directly to OEM brackets. 40" long. Baffles sold separately--27-381. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) Drag pipes. , 2. (4) Mounting brackets. , 3. (1) Exhaust clamp. , 4. (2) 5/16-18 x 1 1/8" hex bolts. , 5. (5) 5/16"-18 T-bolts. , 6. (1) 5/16"-18 x 3/4" hex bolt. , 7. (13) 5/16"-18 lock nuts.. PHD148 A 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD148 A

$170.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Slash-Cut Drag Pipes PHD149 Manufacturer: Cycle Shack Dennis Kirk Part #: H25140 Cycle Shack 1 3/4 in. Slash-Cut Drag Pipes: Manufacturer part # PHD149 - Add style and performance to your Dyna Glide. Pipes designed specifically for Dyna Glide models. Optional baffles are sold separately(use PART NO. 27-381). Made in the USA. Mounts to OEM bracket on 95-05 models. 91-94 models must use PART NO. H27-522 (black) mounting bracket.. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. PHD149 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash-Cut Drag Pipes PHD149

$170.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Straight Cut Drag Pipe Exhaust System PHD149 S Manufacturer: Cycle Shack Dennis Kirk Part #: H44153 Cycle Shack 1 3/4 in. Straight Cut Drag Pipe Exhaust System: Manufacturer part # PHD149 S - Add style and performance to your Dyna Glide. Pipes designed specifically for Dyna Glide models. Optional baffles are sold separately(use Part No. 27-381). Made in the USA. Mounts to OEM bracket on 95-05 models. 91-94 models must use Part No. H27-522 (black) mounting bracket. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing.See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. PHD149 S 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Straight Cut Drag Pipe Exhaust System PHD149 S

$284.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD160 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402305 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System: Manufacturer part # PHD160 SD - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-down tip. Reuse OEM heat shields. , , NOTE: , Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD160 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD160 SD

$284.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Slash Out M Pipe Exhaust System PHD160 SS Manufacturer: Cycle Shack Dennis Kirk Part #: 4402304 Cycle Shack 1 3/4 in. Slash Out M Pipe Exhaust System: Manufacturer part # PHD160 SS - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-out tip. Reuse OEM heat Shields. , , NOTE: , Baffles are removable on Slash-cut systems only., , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD160 SS 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Out M Pipe Exhaust System PHD160 SS

$284.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Tapered M Pipe Exhaust System PHD160 T Manufacturer: Cycle Shack Dennis Kirk Part #: 4402303 Cycle Shack 1 3/4 in. Tapered M Pipe Exhaust System: Manufacturer part # PHD160 T - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Tapered tip. Reuse OEM heat shields. , , NOTE: Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD160 T 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Tapered M Pipe Exhaust System PHD160 T

$313.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Turn-Out M Pipe Exhaust System PHD160 TO Manufacturer: Cycle Shack Dennis Kirk Part #: 4402306 Cycle Shack 1 3/4 in. Turn-Out M Pipe Exhaust System: Manufacturer part # PHD160 TO - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Turn-out tip. Reuse OEM heat shields. , , NOTE: , Baffles are removable on Slash-cut systems only., , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD160 TO 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Turn-Out M Pipe Exhaust System PHD160 TO

$224.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Drag Pipes PHD161 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402310 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD161 - These one-piece 40 in. pipes mount to the OEM bracket. Fit all XL models 07-08 including 883C/1200C. Slash-out tip. Baffles sold separately - 27381. 07-08 1 3/4 in. pipes accept OEM heat shields. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD161 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD161

$224.99 Harley-Davidson > Exhaust > Systems: Cycle Shack 1 3/4 in. Drag Pipes PHD161 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402311 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD161 SD - These one-piece 40 in. pipes mount to the OEM bracket. Fit all XL models 07-08 including 883C/1200C. Baffles sold separately-27381. Slash-down tip. 07-08 1 3/4 in. pipes accept OEM heat shields. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD161 SD 2 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD161 SD