Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

H28765 JIMS Cam, JIMS Outer Balancer Bearing, JIMS Transmission Cover

$216.99 JIMS Valve Guide Plug Gauge Kit 282836 Dennis Kirk Part #: 282836 JIMS Valve Guide Plug Gauge Kit 282836: Kit includes two handles and one of each size plug gauge with collet: .2345", .2350", .2355", .2360", .2365", .2750", .2755", .2760", .2765", .2770", .2775", .2780" and .2785". Made in the U.S.A... 1 on Hand More Info/Options for JIMS Valve Guide Plug Gauge Kit 282836

$161.99 JIMS Inner Cam Bearing Installer 282685 Dennis Kirk Part #: 282685 JIMS Inner Cam Bearing Installer 282685: Manufacturer part # 991 - Used to install inner cam needle bearings in Twin Cam 88 motors. Aligns the bearings with the bores so that you get a perfectly aligned installation. Comes with instructions. Made in the U.S.A... 991 1 on Hand More Info/Options for JIMS Inner Cam Bearing Installer 282685

$87.99 JIMS Starter Jackshaft Seal Installer Tool 282793 Dennis Kirk Part #: 282793 JIMS Starter Jackshaft Seal Installer Tool 282793: Manufacturer part # 966 - Installs and aligns starter jackshaft seal found in upper part of inner primary of Big Twins without damaging seal. For Big Twins 94-06 (except Dyna 06).. 966 1 on Hand More Info/Options for JIMS Starter Jackshaft Seal Installer Tool 282793

$82.99 JIMS Main Drive Gear Bearing/Seal Installation Tool 282690 Dennis Kirk Part #: 282690 JIMS Main Drive Gear Bearing/Seal Installation Tool 282690: Manufacturer part # 986 - Installs both bearings and seal (1-ton press required). Eliminates marring by holding bearings and seal square to bore. Installs seal and bearings to right depth. For Dyna 06 models and all Twin Cam 07 models. Made in the U.S.A... 986 1 on Hand More Info/Options for JIMS Main Drive Gear Bearing/Seal Installation Tool 282690

$82.99 JIMS Outer Balancer Bearing Remover/Installer 282788 Dennis Kirk Part #: 282788 JIMS Outer Balancer Bearing Remover/Installer 282788: Manufacturer part # 961 - Install and remove outboard balancer bearing on guide support plate. For Twin Cam 07-08 B motors.. 961 1 on Hand More Info/Options for JIMS Outer Balancer Bearing Remover/Installer 282788

$154.99 JIMS Balancer Shaft Removal Tool 282787 Dennis Kirk Part #: 282787 JIMS Balancer Shaft Removal Tool 282787: Manufacturer part # 960 - Helps take out front and rear counter-balancer shaft bearing assembly. For Twin Cam 07-08 B motors.. 960 1 on Hand More Info/Options for JIMS Balancer Shaft Removal Tool 282787

$122.99 H28764 JIMS Cam Bearing Installation Tool Dennis Kirk Part #: H28764 H28764 JIMS Cam Bearing Installation Tool: Manufacturer part # 1278 - Used to install inner cam needle bearings in Twin Cam 88 motors. Aligns the bearings with the bores so that you get a perfectly aligned installation. Comes with instructions. Made in the U.S.A... 1278 5 on Hand More Info/Options for H28764 JIMS Cam Bearing Installation Tool

$54.99 H28099 JIMS Cap Installer for 39mm Forks Dennis Kirk Part #: H28099 H28099 JIMS Cap Installer for 39mm Forks: Manufacturer part # 2048 - For installing fork and dust seals. Chrome cap installer must be used with H28-099 to install the OEM chrome fork slider covers on 39mm fork legs. All are sold each. Made in the U.S.A... 2048 1 on Hand More Info/Options for H28099 JIMS Cap Installer for 39mm Forks

$64.99 H28049 JIMS Piston Support Plate Dennis Kirk Part #: H28049 H28049 JIMS Piston Support Plate: Manufacturer part # 1164 - Provides a non-marring, flat surface for pushing piston bottoms against during cylinder installation. 1164 3 on Hand More Info/Options for H28049 JIMS Piston Support Plate

$39.99 H28765 JIMS Cam/Crank Sprocket Lock Tool Dennis Kirk Part #: H28765 H28765 JIMS Cam/Crank Sprocket Lock Tool: Manufacturer part # 1285 - Designed to lock the cam shaft and crankshaft sprockets when removing, replacing and torquing the sprocket bolts. Made from non-marring delrim. Comes with instructions. Made in the U.S.A... 1285 9 on Hand More Info/Options for H28765 JIMS Cam/Crank Sprocket Lock Tool

$71.99 H28212 JIMS Engine Stand for Twin Cam 88 Dennis Kirk Part #: H28212 H28212 JIMS Engine Stand for Twin Cam 88: Manufacturer part # 1022 - It is easier to work on motors when they are out of the frame Each is finished in black powder coat. Stand available for all Big Twin and XL models. Made in the U.S.A... 1022 2 on Hand More Info/Options for H28212 JIMS Engine Stand for Twin Cam 88

$281.99 JIMS Clutch Assembly Service Tool 282797 Dennis Kirk Part #: 282797 JIMS Clutch Assembly Service Tool 282797: Manufacturer part # 971 - Assembles and disassembles clutch shell assembly by removing or installing clutch hub from its bearings. Also installs and removes clutch shell ball bearing (OEM #37906-90) by pushing on the outer perimeter of bearing. For Big Twin 90-07 models.. 971 1 on Hand More Info/Options for JIMS Clutch Assembly Service Tool 282797

$130.95 JIMS Transmission Cover/Bearing Remover and Installer 282389 Dennis Kirk Part #: 282389 JIMS Transmission Cover/Bearing Remover and Installer 282389: Manufacturer part # 1078 - Removes and replaces transmission housing bearings. Can also be used for removing the transmission housing cover without removing the gear assembly. Made in the U.S.A.. , NOTE: Housing bearings must be replaced when pulling door.. 1078 1 on Hand More Info/Options for JIMS Transmission Cover/Bearing Remover and Installer 282389

$53.99 H28419 JIMS Steering Head Bearing Race Installer Dennis Kirk Part #: H28419 H28419 JIMS Steering Head Bearing Race Installer: Manufacturer part # 1725 - Install your steering head races and cups straight and true. Works on Big Twin 36-03 models with stock or custom frames. Made in the U.S.A... 1725 5 on Hand More Info/Options for H28419 JIMS Steering Head Bearing Race Installer

$132.99 JIMS Outer Balancer Bearing, Balancer Bearing and Shaft Installer 282811 Dennis Kirk Part #: 282811 JIMS Outer Balancer Bearing, Balancer Bearing and Shaft Installer 282811: Manufacturer part # 957 - Installes and removes outer balancer bearing of chain guide support plate for FXST/FLST 07-08. Also installs counter balancer shaft and balancer bearing on Twin Cam 96" or 100" B Softail engines.. 957 1 on Hand More Info/Options for JIMS Outer Balancer Bearing, Balancer Bearing and Shaft Installer 282811

$63.99 H28028 JIMS Clutch Clutch Hub Puller Dennis Kirk Part #: H28028 H28028 JIMS Clutch Clutch Hub Puller: Manufacturer part # 1004A - Perfect for use on 3-, 5- or 10-finger clutch hubs as well as 45 in. clutch hubs. Also works on motor sprockets and alternator covers on Big Twins, early XL clutches and many other applications. Made in the U.S.A... 1004A 3 on Hand More Info/Options for H28028 JIMS Clutch Clutch Hub Puller

$198.99 JIMS Inner Cam Bearing Removal Tool 282682 Dennis Kirk Part #: 282682 JIMS Inner Cam Bearing Removal Tool 282682: Manufacturer part # 993 - Used to remove inner cam bearing from Twin Cam 88 motors without damaging the crankcase. Tool is also designed to keep rollers from falling into the crankcase. Comes with instructions. Made in the U.S.A... 993 2 on Hand More Info/Options for JIMS Inner Cam Bearing Removal Tool 282682

$36.99 JIMS Pinion Gear Lock Tool 282369 Dennis Kirk Part #: 282369 JIMS Pinion Gear Lock Tool 282369: Manufacturer part # 1665 - Locks pinion gear when torquing the pinion gear nut. Easy operation -- just align underneath gear and screw into case. Made in the U.S.A... 1665 1 on Hand More Info/Options for JIMS Pinion Gear Lock Tool 282369

$60.99 JIMS 5-Speed Transmission Shaft Installer 282388 Dennis Kirk Part #: 282388 JIMS 5-Speed Transmission Shaft Installer 282388: Manufacturer part # 2189 - Help install transmission shaft without using a hydraulic or arbor press. For Big Twin 84-05. Made in the U.S.A... 2189 Expected Soon More Info/Options for JIMS 5-Speed Transmission Shaft Installer 282388

$15.99 JIMS Shifter Shaft Removal Tool 282697 Dennis Kirk Part #: 282697 JIMS Shifter Shaft Removal Tool 282697: Manufacturer part # 985 - Removes both shifter shafts from transmission door, allowing you further access to disassemble transmission. For Dyna 06 models and all Twin Cam 07 models.. 985 1 on Hand More Info/Options for JIMS Shifter Shaft Removal Tool 282697

CLOSEOUT! Was: $120.95 Now: $90.71 JIMS Outer Primary Starter Bearing Remover 282387 Dennis Kirk Part #: 282387 JIMS Outer Primary Starter Bearing Remover 282387: Manufacturer part # 2235 - Easily removes bearing from polished or chrome primary covers. Made from the highest quality aerospace steel. Made in the U.S.A... 2235 1 on Hand More Info/Options for JIMS Outer Primary Starter Bearing Remover 282387

$58.99 H28702 JIMS Handle/Driver for H28-202 Dennis Kirk Part #: H28702 H28702 JIMS Handle/Driver for H28-202: Manufacturer part # 33416-80 - No Further Information Available. 33416-80 4 on Hand More Info/Options for H28702 JIMS Handle/Driver for H28-202

$132.99 H28719 JIMS Cam Bearing Puller Dennis Kirk Part #: H28719 H28719 JIMS Cam Bearing Puller: Manufacturer part # 95760-TB - A handy way to remove inner cam bearing without splitting cases. Keep rollers from coming out during removal.. 95760-TB 5 on Hand More Info/Options for H28719 JIMS Cam Bearing Puller

$242.99 JIMS Bearing and Race Puller Tool 282790 Dennis Kirk Part #: 282790 JIMS Bearing and Race Puller Tool 282790: Manufacturer part # 963 - Multi-use tool can remove flywheel sprocket shaft inner bearing race on Twin Cam 03-07. Also removes Timken bearing (OEM #9028 or #9029) on Big Twins 55-07, including JIMS 120" engines. Removes Timken bearing pinion shaft inner bearing race on XL 54-07, including all Buells. Also removes press-fit transmission gears and bearings from input and output shafts on all V-Rod models 02-07.. 963 1 on Hand More Info/Options for JIMS Bearing and Race Puller Tool 282790

$55.99 H28214 JIMS Seal Installer for 41mm Forks Dennis Kirk Part #: H28214 H28214 JIMS Seal Installer for 41mm Forks: Manufacturer part # 2047 - For installing fork and dust seals. Sold each. Made in the U.S.A... 2047 3 on Hand More Info/Options for H28214 JIMS Seal Installer for 41mm Forks

$95.99 H28213 JIMS Piston Pin Bushing Tool Dennis Kirk Part #: H28213 H28213 JIMS Piston Pin Bushing Tool: Manufacturer part # 95970-32C - Now you do not have to take the rods out to remove and install wrist pin bushings. For all Big Twin and XL models.. 95970-32C 1 on Hand More Info/Options for H28213 JIMS Piston Pin Bushing Tool