TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Caliber 2-into-1 Exhaust System C-710

$546.95 Harley-Davidson > Exhaust > Systems: Hard Krome S-2 Chrome Exhaust 932-1000 Manufacturer: Hard Krome Dennis Kirk Part #: 4401568 Hard Krome S-2 Chrome Exhaust: Manufacturer part # 932-1000 - 2 1/2 in. staggered straight pipes. True Double Wall Construction (U.S. Patent # 6,908,980) completely eliminates blueing; 1 3/4 in. inner pipe contains heat while full-length, large diameter outer pipe acts as heat shield. Finished off with CNC-machined billet end caps. , Included Items , 1. (2) Drag Pipes, 2. (1) Black Mounting Bracket, 3. (2) 7/8 in. Spacers, 4. (2) 3/8 in. - 16 X 1 3/4 in. Hex Bolts, 5. (4) 3/8 in. -16 X 3/4 in. Hex Bolts, 6. (4) 3/8 in. Square Nuts, 7. (6) 3/8 in. Flat Washers, 8. (6) 3/8 in. Split Washers, , Replacement/Optional End Caps , Straight cut - 44-8252, Slash cut - 44-8255, Tapered cut - 44-8258, , Replacement/Optional Baffles , Spiral Baffle - 44-8261, Straight-thru Baffle - 44-8271, , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 932-1000 1 on hand More Info/Options for Hard Krome S-2 Chrome Exhaust 932-1000

$546.95 Harley-Davidson > Exhaust > Systems: Hard Krome S-2 Black Ceramic Coated Exhaust 932-5000 Manufacturer: Hard Krome Dennis Kirk Part #: 4401569 Hard Krome S-2 Black Ceramic Coated Exhaust: Manufacturer part # 932-5000 - 2 1/2 in. staggered straight pipes. True Double Wall Construction (U.S. Patent # 6,908,980) completely eliminates blueing; 1 3/4 in. inner pipe contains heat while full-length, large diameter outer pipe acts as heat shield. Finished off with CNC-machined billet end caps. , Replacement/Optional End Caps , Straight cut - 44-8252, Slash cut - 44-8255, Tapered cut - 44-8258 , , Replacement/Optional Baffles , Spiral Baffle - 44-8261, Straight-thru Baffle - 44-8271, , INCLUDED ITEMS , Two drag pipes, Mounting bracket, Two 7/8 in. black spacers, Two 3/8 in. x 1-3/4 in. hex bolts, Four 3/8 in. x 3/4 in. hex bolts, Four 3/8 in. square nuts, Six 3/8 in. washers, , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 932-5000 1 on hand More Info/Options for Hard Krome S-2 Black Ceramic Coated Exhaust 932-5000

$722.95 Harley-Davidson > Exhaust > Systems: Hard Krome T-Rex True Duals 961-2007 Manufacturer: Hard Krome Dennis Kirk Part #: 4401588 Hard Krome T-Rex True Duals: Manufacturer part # 961-2007 - The largest true dual exhaust system in the industry. Come with 3 in. diameter outer pipe and chrome 3 in. billet aluminum end caps. Feature a progressive stepped header design with a header sequence of 1.75 in. diameter to 1.875 in. diameter to 2 in. diameter; headers terminate into 2.25 in. diameter baffles. Includes dual O2 sensor ports. , Included Items , 1. (2) Drag Pipes, 2. (1) Black Mounting Bracket, 3. (2) 1/4 in. Spacers, 4. (1) 3/8 in. - 16 X 1 in. Hex Bolt, 5. (2) 3/8 in. Flat Washers, 6. (1) 3/8 in. Nylock Nut, 7. (4) 5/16 in. - 18 X 1/2 in. Hex Bolts, 8. (4) 5/16 in. Split Washers, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 961-2007 1 on hand More Info/Options for Hard Krome T-Rex True Duals 961-2007

$722.95 Harley-Davidson > Exhaust > Systems: Hard Krome T-Rex True Duals 961-22000 Manufacturer: Hard Krome Dennis Kirk Part #: 4400197 Hard Krome T-Rex True Duals: Manufacturer part # 961-22000 - The largest true dual exhaust system in the industry. Come with 3 in. diameter outer pipe and chrome 3 in. billet aluminum end caps. Feature a progressive stepped header design with a header sequence of 1.75 in. diameter to 1.875 in. diameter to 2 in. diameter; headers terminate into 2.25 in. diameter baffles. , INCLUDED ITEMS: , Five 5/16 in. x 1/2 in. hex head bolts. Four 5/16 in. lock washers. Two 1/2 in. spacers. One hose clamp. One mounting bracket. One 5/16 i n. nut. One instruction sheet. NOTE: There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing., , See our Chems/Lubes section to help prevent or remove blueing. 961-22000 Expected Soon More Info/Options for Hard Krome T-Rex True Duals 961-22000

$743.95 Harley-Davidson > Exhaust > Systems: Hard Krome T-Rex Duals with 4 in. Muffler 961-3007 Manufacturer: Hard Krome Dennis Kirk Part #: 4401589 Hard Krome T-Rex Duals with 4 in. Muffler: Manufacturer part # 961-3007 - Quieter than the T-Rex Dual Straights. Feature a progressive stepped header design with a header sequence of 1 3/4 in. diameter to 1 7/8 in. diameter to 2 in. diameter; headers terminate into a 2 1/4 in. diameter baffles. Come with 4 in. diameter outer muffler and triple chrome-plated 4 in. billet aluminum straight-cut end caps. Include dual O2 sensor ports. , INCLUDED ITEMS , Two head pipes, Two mufflers, One mounting black bracket, Two exhaust clamps, One 3/8 in. x 1 in. hex bolt, One 3/8 in. nylock nut, Two 3/8 in. washers, Four 5/16 in. x 1/2 in. hex bolts, Four 5/16 in. split washers, Two 1/2 in. spacers, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 961-3007 1 on hand More Info/Options for Hard Krome T-Rex Duals with 4 in. Muffler 961-3007

$787.95 Harley-Davidson > Exhaust > Systems: Hard Krome T-Rex Duals w/ 4 in. Sideburners 961-4000 Manufacturer: Hard Krome Dennis Kirk Part #: 4400287 Hard Krome T-Rex Duals w/ 4 in. Sideburners: Manufacturer part # 961-4000 - Emit that dragster-style sound. Turn-out style mufflers come with 2.5 in. diameter perforated cores. Feature a progressive stepped header design, with a header sequence of 1.75 in. diameter to 1.875 in. diameter to 2 in. diameter. Come with 4 in. diameter outer muffler. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 961-4000 1 on hand More Info/Options for Hard Krome T-Rex Duals w/ 4 in. Sideburners 961-4000

$787.95 Harley-Davidson > Exhaust > Systems: Hard Krome Vortaxx True Dual Exhaust with Chrome Headpipe, Black Ceramic Muffler and Chrome End Caps 962-4000 Manufacturer: Hard Krome Dennis Kirk Part #: 4401560 Hard Krome Vortaxx True Dual Exhaust with Chrome Headpipe, Black Ceramic Muffler and Chrome End Caps: Manufacturer part # 962-4000 - Stepped header tapers from 1 3/4 in. to 1 7/8 in. to 2 in. diameter with outer pipe measuring 2.75 in.. 4 in. diameter outer muffler features RES-TEC (Reduced Sound Exhaust TEChnology). Patented True Doublewall Construction completely eliminates blueing; inner pipe contains heat while full-length outer pipe acts as heat shield. CNC-machined billet end caps adorn the front and rear of muffler body. , For optional end caps, order DK part numbers:, Front: (1 1/2 in. long), Chrome - 4401582, Black - 4401583, , Rear: (3 in. long), Chrome - 4401576, Black - 4401577, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 962-4000 1 on hand More Info/Options for Hard Krome Vortaxx True Dual Exhaust with Chrome Headpipe, Black Ceramic Muffler and Chrome End Caps 962-4000

$787.95 Harley-Davidson > Exhaust > Systems: Hard Krome Res-Tec Chrome True Duals 963-3007 Manufacturer: Hard Krome Dennis Kirk Part #: 4401566 Hard Krome Res-Tec Chrome True Duals: Manufacturer part # 963-3007 - Stepped headers taper from 1 3/4 in. to 1 7/8 in. to 2 in. diameter. 3 in. diameter outer mufflers are constructed using RES-TEC (Reduced Sound Exhaust TEChnology); include 2 1/4 in. RES-TEC muffler cartridges. True Double Wall Construction (U.S. Patent # 6,908,980) completely eliminates blueing; inner pipe contains heat while large-diameter, full-length outer pipe acts as heat shield. Feature dual O2 sensor ports. Finished off with CNC-machined billet RES-TEC end caps. , Included Items , 1. (2) Full Length Exhaust Pipes, 2. (2) 1 in. Spacers, 3. (1) Steel Support Bracket, 4. (1) 3/8 in. Hex Bolt, 5. (1) 3/8 in. Nylock Nut, 6. (1) 3/8 in. Flat Washer, 7. (4) 5/16 in. Hex Bolts, 8. (4) 5/16 in. Lock Washers, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 963-3007 1 on hand More Info/Options for Hard Krome Res-Tec Chrome True Duals 963-3007

$550.99 Harley-Davidson > Exhaust > Systems: Caliber 2-into-1 Exhaust System C-710 Manufacturer: Caliber Dennis Kirk Part #: H44089 Caliber 2-into-1 Exhaust System: Manufacturer part # C-710 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. C-710 1 on hand More Info/Options for Caliber 2-into-1 Exhaust System C-710

$550.99 Harley-Davidson > Exhaust > Systems: Caliber 2-into-1 Exhaust System C-720 Manufacturer: Caliber Dennis Kirk Part #: H44090 Caliber 2-into-1 Exhaust System: Manufacturer part # C-720 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. C-720 1 on hand More Info/Options for Caliber 2-into-1 Exhaust System C-720

$550.99 Harley-Davidson > Exhaust > Systems: Caliber 2-into-1 Exhaust System C-730 Manufacturer: Caliber Dennis Kirk Part #: H44091 Caliber 2-into-1 Exhaust System: Manufacturer part # C-730 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. C-730 1 on hand More Info/Options for Caliber 2-into-1 Exhaust System C-730

$550.99 Harley-Davidson > Exhaust > Systems: Caliber 2-into-1 Exhaust System C-731 Manufacturer: Caliber Dennis Kirk Part #: H44092 Caliber 2-into-1 Exhaust System: Manufacturer part # C-731 - Boost your motorcycle's power by as much as 25%. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Header pipes are covered by 2 1/2" heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4" and 2" i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-731 1 on hand More Info/Options for Caliber 2-into-1 Exhaust System C-731

$550.99 Harley-Davidson > Exhaust > Systems: Caliber 2-into-1 Exhaust System C-740 Manufacturer: Caliber Dennis Kirk Part #: H44093 Caliber 2-into-1 Exhaust System: Manufacturer part # C-740 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. C-740 1 on hand More Info/Options for Caliber 2-into-1 Exhaust System C-740

$598.99 Harley-Davidson > Exhaust > Systems: Caliber Ray Price Limited Edition Collector Series C-750 Manufacturer: Caliber Dennis Kirk Part #: 4401393 Caliber Ray Price Limited Edition Collector Series: Manufacturer part # C-750 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-750 1 on hand More Info/Options for Caliber Ray Price Limited Edition Collector Series C-750

$598.99 Harley-Davidson > Exhaust > Systems: Caliber Ray Price Limited Edition Collector Series C-753 Manufacturer: Caliber Dennis Kirk Part #: 4401395 Caliber Ray Price Limited Edition Collector Series: Manufacturer part # C-753 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-753 1 on hand More Info/Options for Caliber Ray Price Limited Edition Collector Series C-753

$598.99 Harley-Davidson > Exhaust > Systems: Caliber Ray Price Limited Edition Collector Series C-754 Manufacturer: Caliber Dennis Kirk Part #: 4401396 Caliber Ray Price Limited Edition Collector Series: Manufacturer part # C-754 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. m