|
|
|
|
$47.99
Goodridge Universal 6 in. Brake Line 1902519
Dennis Kirk Part #: 1902519
Goodridge Universal 6 in. Brake Line 1902519: Protects your bikes paint and delicate surfaces while supplying extra stopping power. Braided brake line features a clear coating over the braid so the stainless steel good looks show through. Smooth-bore PTFE liner is compatible with all hydraulic and brake line fluids. Braided cover eliminates the spongy lever feeling associated with rubber brake lines. Female to female chrome plated steel fittings..
1 on Hand
More Info/Options for Goodridge Universal 6 in. Brake Line 1902519
|
|
|
|
|
|
|
|
|
|
$44.99
H19840 DP Brakes Sport HH Brake Pads
Dennis Kirk Part #: H19840
H19840 DP Brakes Sport HH Brake Pads: Manufacturer part # SDP918HH - Pads have an industry high friction rating of HH+ for powerful stopping with no mileage penalty. Brake fade is eliminated using new high tech ceramic heat shield. Pad compound design is dust-free. Maximum braking ability fast from short break-in period. Never use sintered metal pads on calipers that were not originally equipped with them. Sold as a set for one disc or drum.. SDP918HH
1 on Hand
More Info/Options for H19840 DP Brakes Sport HH Brake Pads
|
|
|
|
$57.99
DP Brakes RDP Race Brake Pads 1901408
Dennis Kirk Part #: 1901408
DP Brakes RDP Race Brake Pads 1901408: Developed with the aid of top works teams to perform at the World Superbike level, where an HH friction rating in required. Cream colored, state-of-the-art zirconium-based ceramic material on rear of backing plate works as heat sheild in high-stress conditions to keep heat away from caliper piston and fluid. Designed to give maximum initial power, with fingertip control throughout the stop. Fade free even in the harshest conditions. For track use only. Fitments: Ducati Desmosedici RR 07 1098/S/Tricolor 07 1100S Hypermotard 07.
1 on Hand
More Info/Options for DP Brakes RDP Race Brake Pads 1901408
|
|
|
|
$65.99
DP Brakes RDP Race Brake Pads 1901407
Dennis Kirk Part #: 1901407
DP Brakes RDP Race Brake Pads 1901407: Developed with the aid of top works teams to perform at the World Superbike level, where an HH friction rating in required. Cream colored, state-of-the-art zirconium-based ceramic material on rear of backing plate works as heat sheild in high-stress conditions to keep heat away from caliper piston and fluid. Designed to give maximum initial power, with fingertip control throughout the stop. Fade free even in the harshest conditions. For track use only. Fits Brembo 06-07 race caliper.
1 on Hand
More Info/Options for DP Brakes RDP Race Brake Pads 1901407
|
|
|
|
$46.99
H19251 DP Brakes Sport HH+ Brake Pads
Dennis Kirk Part #: H19251
H19251 DP Brakes Sport HH+ Brake Pads: Manufacturer part # SDP900HH - Replaces OEM numbers 44063-83 and 44063-83A/C. Pads have an industry high friction rating of HH+ for powerful stopping with no mileage penalty. Brake fade is eliminated using new high tech ceramic heat shield. Pad compound design is dust-free. Maximum braking ability fast from short break-in period. Never use sintered metal pads on calipers that were not originally equipped with them. Sold as a set for one disc or drum.. SDP900HH
1 on Hand
More Info/Options for H19251 DP Brakes Sport HH+ Brake Pads
|
|
|
|
$57.99
DP Brakes Sport HH+ Brake Pads 1901409
Dennis Kirk Part #: 1901409
DP Brakes Sport HH+ Brake Pads 1901409: Powerful, industry-high HH+ friction rating with no mileage penalty. New, high-tech ceramic heat shield eliminates brake fade. Dust-free compound design. Quick break-in so you get maximum braking ability fast. For front wheel use only. Fitments: Ducati Desmosedici RR 07 1098/S/Tricolor 07 1100S Hypermotard 07.
1 on Hand
More Info/Options for DP Brakes Sport HH+ Brake Pads 1901409
|
|
|
|
$48.99
Rear DP Brakes Sintered Brake Pads
Dennis Kirk Part #: 1901100
Rear DP Brakes Sintered Brake Pads: Manufacturer part # DP971 - DP Brakes brake pads are designed with sintered metal compounds to give your bike high-tech performance in all conditions. Pads have a quick break-in period so you get maximum performance fast. DP Brakes design and materials ensure consistent hard stops and fade-free performance. Sintered metal compounds outlast more conventional organic or Kevlar pads.. DP971
1 on Hand
More Info/Options for Rear DP Brakes Sintered Brake Pads
|
|
|
|
$44.99
DP Brakes Sport HH Brake Pads 196607
Dennis Kirk Part #: 196607
DP Brakes Sport HH Brake Pads 196607: Manufacturer part # SDP948HH - Pads have an industry high friction rating of HH+ for powerful stopping with no mileage penalty. Brake fade is eliminated using new high tech ceramic heat shield. Pad compound design is dust-free. Maximum braking ability fast from short break-in period. Never use sintered metal pads on calipers that were not originally equipped with them. Sold as a set for one disc or drum.. SDP948HH
1 on Hand
More Info/Options for DP Brakes Sport HH Brake Pads 196607
|
|
|
|
|
|
|
|
CLEARANCE!
Was: $56.99
Now: $42.75
Magnum 12mm 135 Degree Custom Sterling Chromite II Designer Series Front Brake Line 199007
Dennis Kirk Part #: 199007
Magnum 12mm 135 Degree Custom Sterling Chromite II Designer Series Front Brake Line 199007: Manufacturer part # 37539 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 12MM 135 degree upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. NOTE: Upper and lower lines must be purchased separately. 37539
2 on Hand
More Info/Options for Magnum 12mm 135 Degree Custom Sterling Chromite II Designer Series Front Brake Line 199007
|
|
|
|
$53.99
33 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 199024
33 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37733 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37733
1 on Hand
More Info/Options for 33 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$51.99
90 degrees/20 in. Magnum Swivel-Fit Single Disc Front Brake Line
Dennis Kirk Part #: 1902378
90 degrees/20 in. Magnum Swivel-Fit Single Disc Front Brake Line: Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. All lines (except XL 04-08) use 7/16" banjo fittings at the master cylinder and 90 degree 3/8" banjo fittings at the caliper; lines for XL 04-08 models use 10mm banjo fittings at the master cylinder and 60 degree 10mm banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A.. , , Included Items:. , 1. (1) Brake line 42" with one 10mm 90 degree banjo and one 12mm straight banjo fitting. , 2. (2) 10mm crush washers. , 3. (2) 12mm crush washers. , 4. (1) Hose mounting clamp. , 5. (1) Instruction sheet..
1 on Hand
More Info/Options for 90 degrees/20 in. Magnum Swivel-Fit Single Disc Front Brake Line
|
|
|
|
|
|
$68.99
20 in. Magnum Swivel-Fit Single Disc Front Brake Line
Dennis Kirk Part #: 1902321
20 in. Magnum Swivel-Fit Single Disc Front Brake Line: Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. All lines (except XL 04-08) use 7/16" banjo fittings at the master cylinder and 90 degree 3/8" banjo fittings at the caliper; lines for XL 04-08 models use 10mm banjo fittings at the master cylinder and 60 degree 10mm banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A.. , , Included Items , (1) Brake line 58 in. W/One 10MM 90 deg. banjo and one 12MM 90 deg. banjo fitting, (2) 10MM crush washers, (2) 12MM crush washers, (1) Mounting Bracket.
1 on Hand
More Info/Options for 20 in. Magnum Swivel-Fit Single Disc Front Brake Line
|
|
|
|
$53.99
33 in. Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 199014
33 in. Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37633 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37633
1 on Hand
More Info/Options for 33 in. Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
CLEARANCE!
Was: $39.99
Now: $35.99
Magnum Sterling Chromite II Glo Universal Brake Line 199030
Dennis Kirk Part #: 199030
Magnum Sterling Chromite II Glo Universal Brake Line 199030: Add a glowing iridescent color to the chrome appearance of Sterling Chromite braid. Match all colors, even seems to take on tank and fender color. Alternate between reflections of chrome and color. Outer jacket covered with a non-yellowing crystal clear Teflon. Meet or exceed all OEM specifications. Polished and chrome-plated fittings. Constructed with antifriction inner liners, nylon adjuster inserts, and are factory lubricated. Chrome-plated, universal AN-3 fittings. Made in the U.S.A...
2 on Hand
More Info/Options for Magnum Sterling Chromite II Glo Universal Brake Line 199030
|
|
|
|
|
|
CLEARANCE!
Was: $49.99
Now: $44.99
Magnum Sterling Chromite II Glo Universal Brake Line 199053
Dennis Kirk Part #: 199053
Magnum Sterling Chromite II Glo Universal Brake Line 199053: Add a glowing iridescent color to the chrome appearance of Sterling Chromite braid. Match all colors, even seems to take on tank and fender color. Alternate between reflections of chrome and color. Outer jacket covered with a non-yellowing crystal clear Teflon. Meet or exceed all OEM specifications. Polished and chrome-plated fittings. Constructed with antifriction inner liners, nylon adjuster inserts, and are factory lubricated. Chrome-plated, universal AN-3 fittings. Made in the U.S.A...
1 on Hand
More Info/Options for Magnum Sterling Chromite II Glo Universal Brake Line 199053
|
|
|
|
