|
|
|
|
|
|
|
|
|
|
$139.95
Fox Racing Tracker Boots 15
Dennis Kirk Part #: 340768115
Fox Racing Tracker Boots 15: Manufacturer part # 05020 - Finally a boot that offers traction whether you're on or off the bike. High-quality polyurethane-covered leather body. Fully adjustable, dual-locking aluminum buckles offer customized fit and support. Anatomically contoured shin plate. Tough rubber outsole offers more grip than other boots. Internal water-resistant gaiter keeps your feet dry throughout the ride.. 05020
3 on Hand
More Info/Options for Fox Racing Tracker Boots 15
|
|
|
|
$99.95
Moose M1 Boots w/MX Sole 15
Dennis Kirk Part #: 341008415
Moose M1 Boots w/MX Sole 15: Manufacturer part # 34100432 - High-quality features at an affordable price. Uppers are constructed from leather with a polyurethane coating. Contoured polyurethane shin plate and ankle plate for impact and abrasion resistance. Split-grain leather calf guard for abrasion and heat resistance. Polycarbonate two position latching buckle with pivoting base (buckle base has set screws to adjust angle of the boot. Adjustable and replaceable polyurethane closure strap. Foam interior and insole provides superb support and comfort. Replaceable steel toe guard (part number 3410372). Rubber outsole. Average weight: 3.5 lb. per boot. Replacement boot buckle (part number 3410374) and boot strap (part number 3410373).. 34100432
1 on Hand
More Info/Options for Moose M1 Boots w/MX Sole 15
|
|
|
|
CLEARANCE!
Was: $259.95
Now: $159.95
Alpinestars Vector Boots 15
Dennis Kirk Part #: 340928715
Alpinestars Vector Boots 15: Great fit and high-quality features. Upper constructed from leather and polyurethane. Medium- and low-durometer polyurethane provides grip, support and side contact. High-grip suede leather sections shield against exhaust pipe heat. High-modulus polyurethane injected into contoured shin plate resists impacts and abrasions. Contoured rubber sole with steel shank and a large replaceable insert. Therma-welded instep flex zone offers optimum mobility. Side and toe-box area are reinforced by the extended inside plate. Polyurethane calf guard offers high-impact resistance. Ankle brace features additional shock-absorbing inserts. Heel and ankle area feature high-density contoured padding for increased shock absorption. Removable anatomic footbed. Cambrelle lining is laminated with open-cell foam for added comfort. Buckles are injected with impact-resistant technopolymer for durability. Lower two buckles have memory feature quick-release locking system; calf buckle with memory uses quick-release click-in system. Extended gaiter makes the boot virtually watertight. , , DIMENSIONS, Heel height: 2-1/2", Overall height: 16", Upper height: 13-1/2".
2 on Hand
More Info/Options for Alpinestars Vector Boots 15
|
|
|
|
$359.95
Alpinestars Vented Tech 8 15
Dennis Kirk Part #: 340741115
Alpinestars Vented Tech 8 15: Manufacturer part # 201106 - Feature full-grain leather upper with redesigned fit and flex panels for improved flexibility. All new closure system features four aluminum buckles with memory and a quick-release/locking system with self-aligning design for easy, precise closure. Top and bottom reverse-closure design features provide superior impact avoidance and fit. Also features new TPU rubber gaiter at the top of the boot that effectively seals out elements. Contoured shin plate is now injected with high modulus polyurethane for a high level of impact and abrasion resistance; additional holes increase ventilation. New replaceable shock-absorbing material on the shin and instep. Extended inside plate is injected with medium durometer polyurethane and guards the side and toe-box area of the boot. Inner side of the boot is designed for excellent contact and grip against the bike and provides a high level of support. New instep and Achilles flex zones for superior comfort, control and support. New contoured calf plate is injected with polyurethane for high impact resistance. Steel heel and sole guards. Suede panel on the inner side of the boot increases grip and is laminated with aluminum foil to guard against heat. Breathable Cambrelle lining reduces heat buildup. White boot features a new ventilation system positioned to improve air circulation. Removable and fully perforated leather bootie for a precise fit, with asymmetrical gel ankle and a removable anatomic footbed. Patented "ankle brace" with additional shock absorbing insert for the heel. Extended front inner gaiter helps prevent water entry.. 201106
1 on Hand
More Info/Options for Alpinestars Vented Tech 8 15
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$17.99
Right CIPA UTV Side View Mirrors
Dennis Kirk Part #: 392829
Right CIPA UTV Side View Mirrors: Manufacturer part # M38 - Fit side bar or crossbar of roll cage. Clamp is designed to fit most crossbars. Available to fit either left or right side. Sold each. INCLUDED ITEMS: , (1) Mirror Assembly, (1) Bar Clamp, (2) Lock Washer, (1) Machined Mount, (1) Adjusting Nut. M38
8 on Hand
More Info/Options for Right CIPA UTV Side View Mirrors
|
|
|
|
|
|
|
|
|
|
$104.99
Warn Multi-Mount 2 in. Winch Carrier for 4.0 and RT/XT40 516296
Dennis Kirk Part #: 516296
Warn Multi-Mount 2 in. Winch Carrier for 4.0 and RT/XT40 516296: Manufacturer part # 70919 - Mount your new 4.0 or RT/XT40 WARN winch(sold separately) to this carrier; the carrier fits into the multi-mount receiver (sold separately). To move the winch, simply unplug the Quick Connect power leads (sold separately), pull the hitch pin and plug the winch into its new location. , , WHAT TO ORDER: Warn Winch: Your choice of 4.0 or RT/XT40 Warn Quick Connect Wiring Kit: Part No. 51-5732 Warn Mounting Receiver Kit: To be searched by make, model, and year. 70919
1 on Hand
More Info/Options for Warn Multi-Mount 2 in. Winch Carrier for 4.0 and RT/XT40 516296
|
|
|
|
$85.99
Warn Multi-Mount 2 in. Winch Carrierfor 2.5, 3.0, RT/XT25, or RT/XT30 516295
Dennis Kirk Part #: 516295
Warn Multi-Mount 2 in. Winch Carrierfor 2.5, 3.0, RT/XT25, or RT/XT30 516295: Manufacturer part # 70917 - Mount your new 2.5, 3.0, RT/XT25, or RT/XT30 WARN winch(sold separately) to this carrier; the carrier fits into the multi-mount receiver (sold separately). To move the winch, simply unplug the Quick Connect power leads (sold separately), pull the hitch pin and plug the winch into its new location. , , WHAT TO ORDER: Warn Winch: Your choice of 2.5, 3.0, RT/XT25, or RT/XT40 Warn Quick Connect Wiring Kit: Part No. 51-5732 Warn Mounting Receiver Kit: To be searched by make, model, and year. 70917
1 on Hand
More Info/Options for Warn Multi-Mount 2 in. Winch Carrierfor 2.5, 3.0, RT/XT25, or RT/XT30 516295
|
|
|
|
|
|
|
|
|
|
|
|
|
|
