|
|
$119.99
Dynojet Stage 1&3 Jet Kit 171887
Dennis Kirk Part #: 171887
Dynojet Stage 1&3 Jet Kit 171887: Manufacturer part # 4103 - This kit includes enough jets that it can be used as either Stage 1 or Stage 3. Stage 1: Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range. Stage 3: For motorcycles with stock or slightly modified engines that have individual air filters and stock or aftermarket exhaust systems. Proper jetting and individual filters offer no performance improvement on certain engine and airbox designs and compromise driveability - Stage 3 kits are not available for these models. Expect a power increase of 10-15 percent, short stroke high RPM motors are susceptible to compromised driveability as a result. Fits models with Keihin carbs only.. 4103
1 on Hand
More Info/Options for Dynojet Stage 1&3 Jet Kit 171887
|
|
|
|
$119.99
Dynojet Stage 1&3 Jet Kit 171830
Dennis Kirk Part #: 171830
Dynojet Stage 1&3 Jet Kit 171830: Manufacturer part # 3118 - This kit includes enough jets that it can be used as either Stage 1 or Stage 3. Stage 1: Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range. Stage 3: For motorcycles with stock or slightly modified engines that have individual air filters and stock or aftermarket exhaust systems. Proper jetting and individual filters offer no performance improvement on certain engine and airbox designs and compromise driveability - Stage 3 kits are not available for these models. Expect a power increase of 10-15 percent, short stroke high RPM motors are susceptible to compromised driveability as a result. Fits models with Keihin carbs only.. 3118
1 on Hand
More Info/Options for Dynojet Stage 1&3 Jet Kit 171830
|
|
|
|
$169.99
Dynojet Stage 1&3 Jet Kit 171843
Dennis Kirk Part #: 171843
Dynojet Stage 1&3 Jet Kit 171843: Manufacturer part # 3136 - This kit includes enough jets that it can be used as either Stage 1 or Stage 3. Stage 1: Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range. Stage 3: For motorcycles with stock or slightly modified engines that have individual air filters and stock or aftermarket exhaust systems. Proper jetting and individual filters offer no performance improvement on certain engine and airbox designs and compromise driveability - Stage 3 kits are not available for these models. Expect a power increase of 10-15 percent, short stroke high RPM motors are susceptible to compromised driveability as a result. Fits models with Keihin carbs only.. 3136
3 on Hand
More Info/Options for Dynojet Stage 1&3 Jet Kit 171843
|
|
|
|
$119.99
Dynojet Stage 1&3 Jet Kit 171903
Dennis Kirk Part #: 171903
Dynojet Stage 1&3 Jet Kit 171903: Manufacturer part # 4127 - This kit includes enough jets that it can be used as either Stage 1 or Stage 3. Stage 1: Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range. Stage 3: For motorcycles with stock or slightly modified engines that have individual air filters and stock or aftermarket exhaust systems. Proper jetting and individual filters offer no performance improvement on certain engine and airbox designs and compromise driveability - Stage 3 kits are not available for these models. Expect a power increase of 10-15 percent, short stroke high RPM motors are susceptible to compromised driveability as a result. Fits models with Keihin carbs only.. 4127
2 on Hand
More Info/Options for Dynojet Stage 1&3 Jet Kit 171903
|
|
|
|
$471.99
Dynojet Wide-Band Power Commander for BMW 201381
Dennis Kirk Part #: 201381
Dynojet Wide-Band Power Commander for BMW 201381: Manufacturer part # 914611 - Power Commander for BMW provides you the capability for a one-step adjustment of the fuel mixture in closed-loop cruising situations while having the same high-resolution tuning as other models. A Bosch 5 wire LSU4 wide-band sensor replaces the less accurate narrow-band oxygen sensor. Similar to other Power Commanders, outside of the closed-loop area other fuel adjustments are mapped on the dynamometer. An optional real-time air/fuel ratio gauge is available separately. INCLUDED ITEMS: One power commander. One O2 sensor. One USB cable. One CD-Rom. One installation guide. One powder adapter. Two power commander decals. Two dynojet decals. Two Velcro strip. One alcohol swab. Five zip ties.. 914611
1 on Hand
More Info/Options for Dynojet Wide-Band Power Commander for BMW 201381
|
|
|
|
$471.99
Dynojet Wide-Band Power Commander for BMW 201378
Dennis Kirk Part #: 201378
Dynojet Wide-Band Power Commander for BMW 201378: Manufacturer part # 916611 - Power Commander for BMW provides you the capability for a one-step adjustment of the fuel mixture in closed-loop cruising situations while having the same high-resolution tuning as other models. A Bosch 5 wire LSU4 wide-band sensor replaces the less accurate narrow-band oxygen sensor. Similar to other Power Commanders, outside of the closed-loop area other fuel adjustments are mapped on the dynamometer. An optional real-time air/fuel ratio gauge is available separately. INCLUDED ITEMS: One power commander. One O2 sensor. One USB cable. One CD-Rom. One installation guide. One powder adapter. Two power commander decals. Two dynojet decals. Two Velcro strip. One alcohol swab. Five zip ties.. 916611
2 on Hand
More Info/Options for Dynojet Wide-Band Power Commander for BMW 201378
|
|
|
|
$471.99
Dynojet Wide-Band Power Commander for BMW 201380
Dennis Kirk Part #: 201380
Dynojet Wide-Band Power Commander for BMW 201380: Manufacturer part # 918611 - Power Commander for BMW provides you the capability for a one-step adjustment of the fuel mixture in closed-loop cruising situations while having the same high-resolution tuning as other models. A Bosch 5 wire LSU4 wide-band sensor replaces the less accurate narrow-band oxygen sensor. Similar to other Power Commanders, outside of the closed-loop area other fuel adjustments are mapped on the dynamometer. An optional real-time air/fuel ratio gauge is available separately. INCLUDED ITEMS: One power commander. One O2 sensor. One USB cable. One CD-Rom. One installation guide. One powder adapter. Two power commander decals. Two dynojet decals. Two Velcro strip. One alcohol swab. Five zip ties.. 918611
2 on Hand
More Info/Options for Dynojet Wide-Band Power Commander for BMW 201380
|
|
|
|
$332.99
Dynojet Power Commander III USB 200953
Dennis Kirk Part #: 200953
Dynojet Power Commander III USB 200953: Manufacturer part # 105411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 105411
1 on Hand
More Info/Options for Dynojet Power Commander III USB 200953
|
|
|
|
$332.99
Dynojet Power Commander III USB 200952
Dennis Kirk Part #: 200952
Dynojet Power Commander III USB 200952: Manufacturer part # 113411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 113411
2 on Hand
More Info/Options for Dynojet Power Commander III USB 200952
|
|
|
|
$332.99
Dynojet Power Commander III USB 200914
Dennis Kirk Part #: 200914
Dynojet Power Commander III USB 200914: Manufacturer part # 308411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 308411
1 on Hand
More Info/Options for Dynojet Power Commander III USB 200914
|
|
|
|
$332.99
Dynojet Power Commander III USB 201146
Dennis Kirk Part #: 201146
Dynojet Power Commander III USB 201146: Manufacturer part # 117411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 117411
3 on Hand
More Info/Options for Dynojet Power Commander III USB 201146
|
|
|
|
$332.99
Dynojet Power Commander III USB 172246
Dennis Kirk Part #: 172246
Dynojet Power Commander III USB 172246: Manufacturer part # 407411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 407411
1 on Hand
More Info/Options for Dynojet Power Commander III USB 172246
|
|
|
|
$471.99
Dynojet Power Commander III USB 201615
Dennis Kirk Part #: 201615
Dynojet Power Commander III USB 201615: Manufacturer part # 920611 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 920611
1 on Hand
More Info/Options for Dynojet Power Commander III USB 201615
|
|
|
|
$332.99
Dynojet Power Commander III USB 201156
Dennis Kirk Part #: 201156
Dynojet Power Commander III USB 201156: Manufacturer part # 901411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 901411
1 on Hand
More Info/Options for Dynojet Power Commander III USB 201156
|
|
|
|
$332.99
Dynojet Power Commander III USB 200958
Dennis Kirk Part #: 200958
Dynojet Power Commander III USB 200958: Manufacturer part # 211411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 211411
1 on Hand
More Info/Options for Dynojet Power Commander III USB 200958
|
|
|
|
$332.99
Dynojet Power Commander III USB 201622
Dennis Kirk Part #: 201622
Dynojet Power Commander III USB 201622: Manufacturer part # 327411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 327411
10+ on hand
More Info/Options for Dynojet Power Commander III USB 201622
|
|
|
|
$332.99
Dynojet Power Commander III USB 201625
Dennis Kirk Part #: 201625
Dynojet Power Commander III USB 201625: Manufacturer part # 418411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 418411
2 on Hand
More Info/Options for Dynojet Power Commander III USB 201625
|
|
|
|
$332.99
Dynojet Power Commander III USB 200976
Dennis Kirk Part #: 200976
Dynojet Power Commander III USB 200976: Manufacturer part # 502411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 502411
1 on Hand
More Info/Options for Dynojet Power Commander III USB 200976
|
|
|
|
$332.99
Dynojet Power Commander III USB 201161
Dennis Kirk Part #: 201161
Dynojet Power Commander III USB 201161: Manufacturer part # 324411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 324411
2 on Hand
More Info/Options for Dynojet Power Commander III USB 201161
|
|
|
|
$332.99
Dynojet Power Commander III USB 201644
Dennis Kirk Part #: 201644
Dynojet Power Commander III USB 201644: Manufacturer part # 417411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new e | |
