|
|
$457.95
Cobra Long Hot Rod Speedster Exhaust System 4401622
Dennis Kirk Part #: 4401622
Cobra Long Hot Rod Speedster Exhaust System 4401622: Manufacturer part # 2925 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 2925
Expected Soon
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 4401622
|
|
|
|
$457.95
Cobra Long Hot Rod Speedster Exhaust System 449321
Dennis Kirk Part #: 449321
Cobra Long Hot Rod Speedster Exhaust System 449321: Manufacturer part # 4922 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4922
1 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449321
|
|
|
|
$429.00
Cobra Long Hot Rod Speedster Exhaust System 449315
Dennis Kirk Part #: 449315
Cobra Long Hot Rod Speedster Exhaust System 449315: Manufacturer part # 1930 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1930
1 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449315
|
|
|
|
$457.95
Cobra Long Hot Rod Speedster Exhaust System 449410
Dennis Kirk Part #: 449410
Cobra Long Hot Rod Speedster Exhaust System 449410: Manufacturer part # 2917 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 2917
3 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449410
|
|
|
|
$457.95
Cobra Long Hot Rod Speedster Exhaust System 449848
Dennis Kirk Part #: 449848
Cobra Long Hot Rod Speedster Exhaust System 449848: Manufacturer part # 3920 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 3920
Expected Soon
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449848
|
|
|
|
$429.00
Cobra Long Hot Rod Speedster Exhaust System 449317
Dennis Kirk Part #: 449317
Cobra Long Hot Rod Speedster Exhaust System 449317: Manufacturer part # 1925 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1925
1 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449317
|
|
|
|
$457.95
Cobra Long Hot Rod Speedster Exhaust System 4400390
Dennis Kirk Part #: 4400390
Cobra Long Hot Rod Speedster Exhaust System 4400390: Manufacturer part # 4918 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4918
Expected Soon
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 4400390
|
|
|
|
$429.00
Cobra Long Hot Rod Speedster Exhaust System 449323
Dennis Kirk Part #: 449323
Cobra Long Hot Rod Speedster Exhaust System 449323: Manufacturer part # 3916 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 3916
Expected Soon
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449323
|
|
|
|
$429.00
Cobra Long Hot Rod Speedster Exhaust System 449320
Dennis Kirk Part #: 449320
Cobra Long Hot Rod Speedster Exhaust System 449320: Manufacturer part # 4919 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4919
1 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449320
|
|
|
|
$429.00
Cobra Long Hot Rod Speedster Exhaust System 449316
Dennis Kirk Part #: 449316
Cobra Long Hot Rod Speedster Exhaust System 449316: Manufacturer part # 1929 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1929
Expected Soon
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449316
|
|
|
|
$429.00
Cobra Long Hot Rod Speedster Exhaust System 449319
Dennis Kirk Part #: 449319
Cobra Long Hot Rod Speedster Exhaust System 449319: Manufacturer part # 4923 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4923
1 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 449319
|
|
|
|
$457.95
Cobra Long Hot Rod Speedster Exhaust System 4400270
Dennis Kirk Part #: 4400270
Cobra Long Hot Rod Speedster Exhaust System 4400270: Manufacturer part # 2923 - Two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Addition of PowerPort headpipe increases overall performance., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 2923
1 on Hand
More Info/Options for Cobra Long Hot Rod Speedster Exhaust System 4400270
|
|
|
|
$457.95
Cobra Extra Long Hot Rod Speedster Exhaust System 4400271
Dennis Kirk Part #: 4400271
Cobra Extra Long Hot Rod Speedster Exhaust System 4400271: Manufacturer part # 2924 - Tucked away behind those one-piece shields is the Cobra PowerPort, an engineering advancement that provides a performance increase similar to what you get form a 2-into-1 system. Cobra developed the PowerPort to increase power and to maintain overall rideability while remaining discreetly out of sight. And it does that while retaining all the great sound and style you expect from Cobra. 2" Chrome plated steel, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing. Best fit and finish exhaust on the market. Easy installation. Baffles are removable. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 2924
1 on Hand
More Info/Options for Cobra Extra Long Hot Rod Speedster Exhaust System 4400271
|
|
|
|
$546.99
Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 4401088
Dennis Kirk Part #: 4401088
Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 4401088: Manufacturer part # 7573 - Convenient slip-on design features streamlined muffler body for maximum performance gains. Lightweight titanium muffler with satin-finish titanium sleeve. Stainless steel mid-pipe. Carbon fiber muffler strap with stainless steel mounting hardware. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7573
Expected Soon
More Info/Options for Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 4401088
|
|
|
|
$441.99
Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 4400856
Dennis Kirk Part #: 4400856
Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 4400856: Manufacturer part # 7105 - Convenient slip-on design features streamlined muffler body for maximum performance gains. Lightweight titanium muffler with satin-finish titanium sleeve. Stainless steel mid-pipe. Carbon fiber muffler strap with stainless steel mounting hardware. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7105
Expected Soon
More Info/Options for Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 4400856
|
|
|
|
$252.95
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 444300
Dennis Kirk Part #: 444300
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 444300: Manufacturer part # 3264 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Cobra Drag Pipes have removable baffles. 2 in. muffler bodies are used on O.E.M. headpipes. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 04-05 California-only versions INCLUDED ITEMS: One front muffler. One rear muffler. Two #268-55 clamps. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 3264
Expected Soon
More Info/Options for Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 444300
|
|
|
|
$279.99
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 4400217
Dennis Kirk Part #: 4400217
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 4400217: Manufacturer part # 2273 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Cobra Drag Pipes have removable baffles. 2 in. muffler bodies are used on O.E.M. headpipes. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 04-05 California-only versions INCLUDED ITEMS: One front muffler. One rear muffler. Two #268-55 clamps. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2273
Expected Soon
More Info/Options for Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 4400217
|
|
|
|
$252.95
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 445306
Dennis Kirk Part #: 445306
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 445306: Manufacturer part # 2267 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Cobra Drag Pipes have removable baffles. 2 in. muffler bodies are used on O.E.M. headpipes. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 04-05 California-only versions INCLUDED ITEMS: One front muffler. One rear muffler. Two #268-55 clamps. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2267
3 on Hand
More Info/Options for Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 445306
|
|
|
|
$407.99
Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 4400938
Dennis Kirk Part #: 4400938
Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 4400938: Manufacturer part # 6890 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe; bolt-ons feature machined-from-aluminum muffler flange that attaches directly to the OEM header pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Brushed aluminum muffler body. Aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 6890
2 on Hand
More Info/Options for Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 4400938
|
|
|
|
$360.99
Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 4402939
Dennis Kirk Part #: 4402939
Leo Vince SBK Oval Evo II Stainless Slip On Muffler With Aluminum Canister 4402939: Manufacturer part # 6718 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe; bolt-ons feature machined-from-aluminum muffler flange that attaches directly to the OEM header pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Brushed aluminum muffler body. Aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not th | |
