KR Tuned Carbon Fiber Slip-On Muffler 405072200

This site contains about 138,337 documents.

View by:

Page: 1 400 500 600 700 800 900 1,000 1,100 1,200 1,320 1,330 1,340 1,350 1,360 1,370 1,380 1,390 1,400 1,406 1,407 1,408 1,409 1,410 1,411 1,412 1,413 1,414 1,415 1,416 1,417 1,418 1,419 1,420 1,421 1,422 1,423 1,424 1,425 1,426 1,427 1,428 1,429 1,430 1,431 1,432 1,433 1,434 1,435 1,440 1,450 1,460 1,470 1,480 1,490 1,500 1,510 1,520 1,600 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 3,000 4,000 4,612

$424.95 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Hard Krome Double D Drag Slip-Ons 40-3350
Manufacturer: Hard Krome
Dennis Kirk Part #: 449385
Hard Krome Double D Drag Slip-Ons: Manufacturer part # 40-3350 - These slip-ons are the same diameter as your original head pipe, so they bolt on in minutes. Double wall construction, slash-cut rear pipe and 1 3/4 in. inside pipe diameter. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-3350
2 on hand

More Info/Options for Hard Krome Double D Drag Slip-Ons 40-3350

$424.95 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4030
Manufacturer: Hard Krome
Dennis Kirk Part #: 446445
Hard Krome 3 1/2 in. Drag Double D Slip-Ons: Manufacturer part # 40-4030 - The first double wall 3 1/2 in. slip-on. Replace your stock mufflers and bolt on in minutes. Doublewall construction and slash cut rear pipe. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. , , Included Items: , (2) Slashcut Mufflers with Removable Baffles, (1) 12-3/ 4 in. Black Mounting Bracket, (1) T-Bolt Clamp, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, (4) 3/8 in. Square Nuts. NOTE: This has one double wall headpipe. Not for 2004-06 California versions of this motorcycle . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-4030
1 on hand

More Info/Options for Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4030

$367.95 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4150
Manufacturer: Hard Krome
Dennis Kirk Part #: 446447
Hard Krome 3 1/2 in. Drag Double D Slip-Ons: Manufacturer part # 40-4150 - The first double wall 3 1/2 in. slip-on. Replace your stock mufflers and bolt on in minutes. Doublewall construction and slash cut rear pipe. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. , , Included Items: , (2) Slashcut Slip-On Mufflers w/Removable Baffles, (1) 15-1/2 in. Black Mounting Bracket, (2) T-Bolt Clamps, (4) 10MM x 15MM Hex Head Bolts, (2) 8MM x 20Mm Hex Head Bolts, (2) 8MM Lock Washers, (4) 10MM Lock Washers, (4) 10MM Square Nuts, (8) 10MM Flat Washers. NOTE: Not for 2004-06 California versions of this motorcycle . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-4150
2 on hand

More Info/Options for Hard Krome 3 1/2 in. Drag Double D Slip-Ons 40-4150

$367.95 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Hard Krome Drag Double D Slip-Ons 40-7050
Manufacturer: Hard Krome
Dennis Kirk Part #: 445934
Hard Krome Drag Double D Slip-Ons: Manufacturer part # 40-7050 - These slip-ons are the same diameter as your original head pipe, so they bolt on in minutes. Double wall construction, slash-cut rear pipe and 1 3/4 in. inside pipe diameter. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-7050
1 on hand

More Info/Options for Hard Krome Drag Double D Slip-Ons 40-7050

$389.95 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Hard Krome Double D Drag Slip-Ons 40-7060
Manufacturer: Hard Krome
Dennis Kirk Part #: 449386
Hard Krome Double D Drag Slip-Ons: Manufacturer part # 40-7060 - These slip-ons are the same diameter as your original head pipe, so they bolt on in minutes. Double wall construction, slash-cut rear pipe and 1 3/4 in. inside pipe diameter. 2-into-2 right side exit slip-ons. Polished chrome finish. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 40-7060
1 on hand

More Info/Options for Hard Krome Double D Drag Slip-Ons 40-7060

$170.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Mac 2-2 Chrome Taper-Tip Slip-Ons 4022221
Manufacturer: Mac
Dennis Kirk Part #: 25587
Mac 2-2 Chrome Taper-Tip Slip-Ons: Manufacturer part # 4022221 - High quality, economical replacement mufflers for burned-out or rusted originals on many popular Japanese motorcycles. All retain original muffler quantity and configuration. Dual nickel plating for long-lasting good looks. Baffles are non-removable. Sold in pairs. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 4022221
1 on hand

More Info/Options for Mac 2-2 Chrome Taper-Tip Slip-Ons 4022221

$679.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: KR Tuned Carbon Fiber Slip-On Muffler 405072200
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401774
KR Tuned Carbon Fiber Slip-On Muffler: Manufacturer part # 405072200 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 405072200
1 on hand

More Info/Options for KR Tuned Carbon Fiber Slip-On Muffler 405072200

$679.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: KR Tuned Titanium Slip-On Mufflers 405072299
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401773
KR Tuned Titanium Slip-On Mufflers: Manufacturer part # 405072299 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 405072299
1 on hand

More Info/Options for KR Tuned Titanium Slip-On Mufflers 405072299

$679.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: KR Tuned Carbon Fiber Slip-On Muffler 406082200
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401772
KR Tuned Carbon Fiber Slip-On Muffler: Manufacturer part # 406082200 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 406082200
1 on hand

More Info/Options for KR Tuned Carbon Fiber Slip-On Muffler 406082200

$679.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: KR Tuned Titanium Slip-On Mufflers 406082299
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401771
KR Tuned Titanium Slip-On Mufflers: Manufacturer part # 406082299 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 406082299
1 on hand

More Info/Options for KR Tuned Titanium Slip-On Mufflers 406082299

$679.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: KR Tuned Carbon Fiber Slip-On Muffler 407092200
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401770
KR Tuned Carbon Fiber Slip-On Muffler: Manufacturer part # 407092200 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 407092200
1 on hand

More Info/Options for KR Tuned Carbon Fiber Slip-On Muffler 407092200

$679.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: KR Tuned Titanium Slip-On Mufflers 407092299
Manufacturer: KR Tuned
Dennis Kirk Part #: 4401769
KR Tuned Titanium Slip-On Mufflers: Manufacturer part # 407092299 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 407092299
1 on hand

More Info/Options for KR Tuned Titanium Slip-On Mufflers 407092299

$170.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Supertrapp 1 1/2 in. Inlet Universal Aluminum External Disc Muffler 412-15000
Manufacturer: Supertrapp
Dennis Kirk Part #: 43961
Supertrapp 1 1/2 in. Inlet Universal Aluminum External Disc Muffler: Manufacturer part # 412-15000 - Aluminum body universal muffler includes all items shown, including eight 4 in. diffuser discs, closed end cap, re-packable baffle core and a weld-on mounting tab. Approximately 13 in. long tip-to-tip without discs or end cap. 1 1/2" inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 412-15000
1 on hand

More Info/Options for Supertrapp 1 1/2 in. Inlet Universal Aluminum External Disc Muffler 412-15000

$170.99 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Supertrapp 1 3/4 in. Inlet Universal Aluminum External Disc Muffler 412-17500
Manufacturer: Supertrapp
Dennis Kirk Part #: 43962
Supertrapp 1 3/4 in. Inlet Universal Aluminum External Disc Muffler: Manufacturer part # 412-17500 - Aluminum body universal muffler includes all items shown, including eight 4 in. diffuser discs, closed end cap, re-packable baffle core and a weld-on mounting tab. Approximately 13 in. long tip-to-tip without discs or end cap. 1 3/4" inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 412-17500
1 on hand

More Info/Options for Supertrapp 1 3/4 in. Inlet Universal Aluminum External Disc Muffler 412-17500

$252.95 Metric Bikes > Exhaust > Slip-on & Bolt-on Mufflers: Cobra Slip-On w/Slash Cut Tip 4163SC
Manufacturer: Cobra
Dennis Kirk Part #: 441429
Cobra Slip-On w/Slash Cut Tip: Manufacturer part # 4163SC - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. Staggered dual, 3 in. diameter mufflers and all drag pipes exit on the right-hand side of the motorcycle. Muffler bodies are used on the OEM headpipes, which also eliminates the original muffler box. Baffles are non-removable. No re-jetting necessary although it is recommended for best performance. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 4163SC
Expected Soon

More Info/Options for Cobra Slip-On w/Slash Cut Tip 4163SC