Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Yoshimura 4-into-1 RS-5 Exhaust System w

$977.99 Metric Bikes > Exhaust > Systems: Yoshimura R-77 Exhaust System 1121005 Manufacturer: Yoshimura Dennis Kirk Part #: 4402861 Yoshimura R-77 Exhaust System: Manufacturer part # 1121005 - Styled by Yoshimura specifically to match the new-generation Hayabusa. R-77 exhaust features a trapezoid-shaped muffler sleeve that maximizes muffler flow volume and a sharp silhouette that flows with the new Hayabusa body design. Shape of the end cap is an evolution of our R-55 exhaust. Slip-ons include dual mufflers, stainless steel tailpipes, heat shields and all necessary hardware. Full systems are a 4-into-1 design with a right-hand exit muffler; slip-ons are dual muffler design. Full system weighs approximately 13 lb., almost a 35-lb. weight savings from stock. Maximizes torque and useable power for optimum gains throughtout the entire powerband. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1121005 1 on hand More Info/Options for Yoshimura R-77 Exhaust System 1121005

$882.99 Metric Bikes > Exhaust > Systems: Yoshimura 4-Into-1 Tri-Oval Race System with Stainless Steel Header Pipe and Muffler Sleeve 1121065 Manufacturer: Yoshimura Dennis Kirk Part #: 4402852 Yoshimura 4-Into-1 Tri-Oval Race System with Stainless Steel Header Pipe and Muffler Sleeve: Manufacturer part # 1121065 - The latest in exhaust design and high performance for your sportbike. Tested and developed with three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape for maximum cornering clearance, unique looks and a distinctive sound. Stainless steel header pipe construction with tapered, quick-release Duplex headers. Header pipes are electro-polished for the ultimate high-luster finish. Baffle is large 2.25 in. race stainless steel design, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1121065 1 on hand More Info/Options for Yoshimura 4-Into-1 Tri-Oval Race System with Stainless Steel Header Pipe and Muffler Sleeve 1121065

$929.99 Metric Bikes > Exhaust > Systems: Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1121075 Manufacturer: Yoshimura Dennis Kirk Part #: 4402865 Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1121075 - Yoshimura's newest championship-winning exhaust system. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. Cone end caps new design features a ventilation system that dissipates unwanted heat from the exhaust tip, which results in increased performance. Header and midpipe feature durable, MIG-welded stainless steel construction. Quick-release muffler is made of polished stainless steel. , , NOTE: 4-into-1 design with muffler on the right side, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1121075 1 on hand More Info/Options for Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1121075

$1351.99 Metric Bikes > Exhaust > Systems: Titanium TI Force Exhaust System with Polished Canister 11211 Manufacturer: Force Dennis Kirk Part #: 449883 Titanium TI Force Exhaust System with Polished Canister: Manufacturer part # 11211 - High-quality, high-performance exhuast sytems. Provide consistent horsepower and torque gains. Canisters have a straight-through baffle core producing a deep growl at the bottom end and a heart-skipping scream at the peak, much like a MotoGP bike. High-performance tapered headpipes and titanium oval mufflers that are unrivaled in looks and performance. Offer superior weight savings; overall weight just over 9 lbs.. Made of .040" titanium tubing. Some models available with a polished or rainbow canister. May require fairing modifications. NOTE: Titanium racing exhaust works best with modified engines that require large headers and more exhaust flow, offering unbelievable peak power NOTE: This item ships 3-4 business days after order is placed, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 11211 1 on hand More Info/Options for Titanium TI Force Exhaust System with Polished Canister 11211

$1043.99 Metric Bikes > Exhaust > Systems: Yoshimura R-77 Slip-On Mufflers - Carbon Muffler 1121202 Manufacturer: Yoshimura Dennis Kirk Part #: 4402862 Yoshimura R-77 Slip-On Mufflers - Carbon Muffler: Manufacturer part # 1121202 - Styled by Yoshimura specifically to match the new-generation Hayabusa. R-77 exhaust features a trapezoid-shaped muffler sleeve that maximizes muffler flow volume and a sharp silhouette that flows with the new Hayabusa body design. Shape of the end cap is an evolution of our R-55 exhaust. Slip-ons include dual mufflers, stainless steel tailpipes, heat shields and all necessary hardware. Full systems are a 4-into-1 design with a right-hand exit muffler; slip-ons are dual muffler design. Full system weighs approximately 13 lb., almost a 35-lb. weight savings from stock. Maximizes torque and useable power for optimum gains throughtout the entire powerband. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1121202 1 on hand More Info/Options for Yoshimura R-77 Slip-On Mufflers - Carbon Muffler 1121202

$805.99 Metric Bikes > Exhaust > Systems: Yoshimura R-77 Slip-On Mufflers - Stainless Muffler 1121205 Manufacturer: Yoshimura Dennis Kirk Part #: 4402863 Yoshimura R-77 Slip-On Mufflers - Stainless Muffler: Manufacturer part # 1121205 - Styled by Yoshimura specifically to match the new-generation Hayabusa. R-77 exhaust features a trapezoid-shaped muffler sleeve that maximizes muffler flow volume and a sharp silhouette that flows with the new Hayabusa body design. Shape of the end cap is an evolution of our R-55 exhaust. Slip-ons include dual mufflers, stainless steel tailpipes, heat shields and all necessary hardware. Full systems are a 4-into-1 design with a right-hand exit muffler; slip-ons are dual muffler design. Full system weighs approximately 13 lb., almost a 35-lb. weight savings from stock. Maximizes torque and useable power for optimum gains throughtout the entire powerband. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1121205 1 on hand More Info/Options for Yoshimura R-77 Slip-On Mufflers - Stainless Muffler 1121205

$948.99 Metric Bikes > Exhaust > Systems: Yoshimura R-77 Slip-On Mufflers - Titanium Muffler 1121207 Manufacturer: Yoshimura Dennis Kirk Part #: 4402864 Yoshimura R-77 Slip-On Mufflers - Titanium Muffler: Manufacturer part # 1121207 - Styled by Yoshimura specifically to match the new-generation Hayabusa. R-77 exhaust features a trapezoid-shaped muffler sleeve that maximizes muffler flow volume and a sharp silhouette that flows with the new Hayabusa body design. Shape of the end cap is an evolution of our R-55 exhaust. Slip-ons include dual mufflers, stainless steel tailpipes, heat shields and all necessary hardware. Full systems are a 4-into-1 design with a right-hand exit muffler; slip-ons are dual muffler design. Full system weighs approximately 13 lb., almost a 35-lb. weight savings from stock. Maximizes torque and useable power for optimum gains throughtout the entire powerband. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available., , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 1121207 1 on hand More Info/Options for Yoshimura R-77 Slip-On Mufflers - Titanium Muffler 1121207

$622.99 Metric Bikes > Exhaust > Systems: Yoshimura 2-Into-1 Tri-Oval TRS Stainless Steel Race System with Stainless Steel Header Pipe and Muffler Sleeve 1130065 Manufacturer: Yoshimura Dennis Kirk Part #: 449194 Yoshimura 2-Into-1 Tri-Oval TRS Stainless Steel Race System with Stainless Steel Header Pipe and Muffler Sleeve: Manufacturer part # 1130065 - The latest in exhaust design and high performance for your sportbike. Tested and developed with three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape for maximum cornering clearance, unique looks and a distinctive sound. Stainless steel header pipe construction with tapered, quick-release Duplex headers. Header pipes are electro-polished for the ultimate high-luster finish. Baffle is large 2.25 in. race stainless steel design, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1130065 1 on hand More Info/Options for Yoshimura 2-Into-1 Tri-Oval TRS Stainless Steel Race System with Stainless Steel Header Pipe and Muffler Sleeve 1130065

CLEARANCE! Was: $592.99 Now: $468.00 Metric Bikes > Exhaust > Systems: Yoshimura RS-3 Stainless Oval Race Exhaust System 1131055 Manufacturer: Yoshimura Dennis Kirk Part #: 4400511 Yoshimura RS-3 Stainless Oval Race Exhaust System: Manufacturer part # 1131055 - The standard to which all other race exhausts are measured. Race track proven by Yoshimura Suzuki AMA Superbike Race Team. The people who hand pack four time AMA champion Mat Mladin's RS-3 muffler pay the same meticulous attention to detail when making your exhaust system. Header construction is stainless steel. Stainless steel quick-release mufflers. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1131055 1 on hand More Info/Options for Yoshimura RS-3 Stainless Oval Race Exhaust System 1131055

$315.95 Metric Bikes > Exhaust > Systems: Cobra 1 5/8 in. Drag Pipe Exhaust System with Slash Cut Tip 1161SC Manufacturer: Cobra Dennis Kirk Part #: 444819 Cobra 1 5/8 in. Drag Pipe Exhaust System with Slash Cut Tip: Manufacturer part # 1161SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they won't interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. All muffled systems feature 2 1/2 in. staggered duals; all systems exit on the right-hand side of the motorcycle. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Baffles are nonremovable. Full-length chrome plated heat shields included with this system, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1161SC 1 on hand More Info/Options for Cobra 1 5/8 in. Drag Pipe Exhaust System with Slash Cut Tip 1161SC

$834.99 Metric Bikes > Exhaust > Systems: Yoshimura RS-5 Stainless Exhaust System 1200075 Manufacturer: Yoshimura Dennis Kirk Part #: 4402051 Yoshimura RS-5 Stainless Exhaust System: Manufacturer part # 1200075 - Yoshimura's most cutting-edge exhaust design. RS-5 systems are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1200075 1 on hand More Info/Options for Yoshimura RS-5 Stainless Exhaust System 1200075

$319.95 Metric Bikes > Exhaust > Systems: Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12001 Manufacturer: Vance & Hines Dennis Kirk Part #: 25426 Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler: Manufacturer part # 12001 - These brilliantly chrome finished, high-performance exhaust systems are the perfect complement for many early superbikes and standard style bikes. Internally coated to keep the chrome gleaming for years. Power-Flo replaceable, re-packable baffle for performance that meets noise standards. Megaphone-style muffler section with tuned length headpipes. Cornering clearance is improved, and oil filter/drain plug access is retained (except on Suzuki GS1100L 1980, where oil drain plug and oil filter access is restricted. Carburetor re-jetting recommended for maximum performance. Oil drain plug and oil filter access restricted, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12001 4 on hand More Info/Options for Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12001

$280.99 Metric Bikes > Exhaust > Systems: Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 1200184 Manufacturer: Vance & Hines Dennis Kirk Part #: 25432 Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler: Manufacturer part # 1200184 - These brilliantly chrome finished, high-performance exhaust systems are the perfect complement for many early superbikes and standard style bikes. Internally coated to keep the chrome gleaming for years. Power-Flo replaceable, re-packable baffle for performance that meets noise standards. Megaphone-style muffler section with tuned length headpipes. Cornering clearance is improved, and oil filter/drain plug access is retained. Carburetor re-jetting recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1200184 1 on hand More Info/Options for Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 1200184

$319.95 Metric Bikes > Exhaust > Systems: Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12001G Manufacturer: Vance & Hines Dennis Kirk Part #: 25429 Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler: Manufacturer part # 12001G - These brilliantly chrome finished, high-performance exhaust systems are the perfect complement for many early superbikes and standard style bikes. Internally coated to keep the chrome gleaming for years. Power-Flo replaceable, re-packable baffle for performance that meets noise standards. Megaphone-style muffler section with tuned length headpipes. Cornering clearance is improved, and oil filter/drain plug access is retained. Carburetor re-jetting recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12001G Expected Soon More Info/Options for Vance & Hines 4-into-1 Megaphone Street System W/Chrome Header Pipes & Muffler 12001G

$199.95 Metric Bikes > Exhaust > Systems: Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler 12001P Manufacturer: Vance & Hines Dennis Kirk Part #: 25431 Vance & Hines Pro Drag Race 4-into-1 Megaphone System W/Chrome Header and Muffler: Manufacturer part # 12001P - A system built for the all-out horsepower gains demanded by the weekend Bracket racer. Not legal for street use -- low megaphone design is for drag racing only. Gleaming chrome finish. Straight-through, no baffle design for maximum exhaust flow (not EPA approved). Not a quick change exhaust system. Reaches peak performance with minor engine mods and carb re-jetting; instructions included. All systems also require chassis modifications, , NOTE: This pipe is for drag racing only, does not have a baffle or a baffle available for it, has insufficient ground clearence for street use and requires modification to the footpeg, brake pedal, and chassis, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modificati