Sunstar Sprocket 2522642, Sunstar Sprocket 2522643

This site contains about 138,337 documents.

View by:

Page: 1 300 400 500 600 700 800 900 1,000 1,100 1,210 1,220 1,230 1,240 1,250 1,260 1,270 1,280 1,290 1,301 1,302 1,303 1,304 1,305 1,306 1,307 1,308 1,309 1,310 1,311 1,312 1,313 1,314 1,315 1,316 1,317 1,318 1,319 1,320 1,321 1,322 1,323 1,324 1,325 1,326 1,327 1,328 1,329 1,330 1,340 1,350 1,360 1,370 1,380 1,390 1,400 1,410 1,500 1,600 1,700 1,800 1,900 2,000 2,100 2,200 2,300 3,000 4,000 4,612

$45.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2522642
Manufacturer: Sunstar
Dennis Kirk Part #: 8003542S
Sunstar Sprocket: Manufacturer part # 2522642 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2522642
3 on hand

More Info/Options for Sunstar Sprocket 2522642

$45.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2522643
Manufacturer: Sunstar
Dennis Kirk Part #: 8003543S
Sunstar Sprocket: Manufacturer part # 2522643 - This sprocket is to be used as a conversion to a 530 chain size on the following models. GSX1100F Katana 88-93. GSX-R1100 89-92. GSX-R1100W 93-98. RF900R 94-97. GSX-R750 98-99. , When converting from 630 to 530, the exact chain length needed has not been determined. A safe formula to use is to multiply the number of links used of your 630 setup by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycleable paint for corrosion resistance. , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2522643
1 on hand

More Info/Options for Sunstar Sprocket 2522643

$46.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2522645
Manufacturer: Sunstar
Dennis Kirk Part #: 8003545S
Sunstar Sprocket: Manufacturer part # 2522645 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2522645
2 on hand

More Info/Options for Sunstar Sprocket 2522645

$46.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2522646
Manufacturer: Sunstar
Dennis Kirk Part #: 8003546S
Sunstar Sprocket: Manufacturer part # 2522646 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2522646
1 on hand

More Info/Options for Sunstar Sprocket 2522646

$46.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2522647
Manufacturer: Sunstar
Dennis Kirk Part #: 8003547S
Sunstar Sprocket: Manufacturer part # 2522647 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2522647
1 on hand

More Info/Options for Sunstar Sprocket 2522647

$49.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2522650
Manufacturer: Sunstar
Dennis Kirk Part #: 8003550S
Sunstar Sprocket: Manufacturer part # 2522650 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2522650
1 on hand

More Info/Options for Sunstar Sprocket 2522650

$37.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2532338
Manufacturer: Sunstar
Dennis Kirk Part #: 8001338S
Sunstar Sprocket: Manufacturer part # 2532338 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked . This is a 530 conversion for the following models:, 1977-78 CB750A Hondamatic, 1977-78 CB750F Super Sport, 1977-79 CB750K, 1979 CB750L. , When converting from a 630 to 530, the exact chain length needed has not been determined. Keep in mind that at 630 chain has a pitch of 3/4" and a 530 has a 5/8", so 104 links of a 530 chain is about the same 86 pitches of a 630 chain (104 x 6.25=65", 86 x .75= 64.5") The other factor to consider is that 530 sprockets of the same tooth size are smaller in diameter that 630, so less length is needed to wrap around it. A safe formula to use is the multiply the number of links used of your 630 set up by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycle . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2532338
Expected Soon

More Info/Options for Sunstar Sprocket 2532338

$38.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2532340
Manufacturer: Sunstar
Dennis Kirk Part #: 8001340S
Sunstar Sprocket: Manufacturer part # 2532340 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked. This is a 530 conversion for the following models:, 1977-78 CB750A Hondamatic, 1977-78 CB750F Super Sport, 1977-79 CB750K, 1979 CB750L. , When converting from a 630 to 530, the exact chain length needed has not been determined. Keep in mind that at 630 chain has a pitch of 3/4" and a 530 has a 5/8", so 104 links of a 530 chain is about the same 86 pitches of a 630 chain (104 x 6.25=65", 86 x .75= 64.5") The other factor to consider is that 530 sprockets of the same tooth size are smaller in diameter that 630, so less length is needed to wrap around it. A safe formula to use is the multiply the number of links used of your 630 set up by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycle . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2532340
1 on hand

More Info/Options for Sunstar Sprocket 2532340

$38.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2532343
Manufacturer: Sunstar
Dennis Kirk Part #: 8001343S
Sunstar Sprocket: Manufacturer part # 2532343 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked. This is a 530 conversion for the following models:, 1977-78 CB750A Hondamatic, 1977-78 CB750F Super Sport, 1977-79 CB750K, 1979 CB750L. , When converting from a 630 to 530, the exact chain length needed has not been determined. Keep in mind that at 630 chain has a pitch of 3/4" and a 530 has a 5/8", so 104 links of a 530 chain is about the same 86 pitches of a 630 chain (104 x 6.25=65", 86 x .75= 64.5") The other factor to consider is that 530 sprockets of the same tooth size are smaller in diameter that 630, so less length is needed to wrap around it. A safe formula to use is the multiply the number of links used of your 630 set up by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycle . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2532343
1 on hand

More Info/Options for Sunstar Sprocket 2532343

$39.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2532345
Manufacturer: Sunstar
Dennis Kirk Part #: 8001345S
Sunstar Sprocket: Manufacturer part # 2532345 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked. This is a 530 conversion for the following models:, 1977-78 CB750A Hondamatic, 1977-78 CB750F Super Sport, 1977-79 CB750K, 1979 CB750L. , When converting from a 630 to 530, the exact chain length needed has not been determined. Keep in mind that at 630 chain has a pitch of 3/4" and a 530 has a 5/8", so 104 links of a 530 chain is about the same 86 pitches of a 630 chain (104 x 6.25=65", 86 x .75= 64.5") The other factor to consider is that 530 sprockets of the same tooth size are smaller in diameter that 630, so less length is needed to wrap around it. A safe formula to use is the multiply the number of links used of your 630 set up by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycle.. 2532345
1 on hand

More Info/Options for Sunstar Sprocket 2532345

$39.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2532346
Manufacturer: Sunstar
Dennis Kirk Part #: 8001346S
Sunstar Sprocket: Manufacturer part # 2532346 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked. This is a 530 conversion for the following models:, 1977-78 CB750A Hondamatic, 1977-78 CB750F Super Sport, 1977-79 CB750K, 1979 CB750L. , When converting from a 630 to 530, the exact chain length needed has not been determined. Keep in mind that at 630 chain has a pitch of 3/4" and a 530 has a 5/8", so 104 links of a 530 chain is about the same 86 pitches of a 630 chain (104 x 6.25=65", 86 x .75= 64.5") The other factor to consider is that 530 sprockets of the same tooth size are smaller in diameter that 630, so less length is needed to wrap around it. A safe formula to use is the multiply the number of links used of your 630 set up by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycle . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2532346
1 on hand

More Info/Options for Sunstar Sprocket 2532346

$39.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2532348
Manufacturer: Sunstar
Dennis Kirk Part #: 8001348S
Sunstar Sprocket: Manufacturer part # 2532348 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked. This is a 530 conversion for the following models:, 1977-78 CB750A Hondamatic, 1977-78 CB750F Super Sport, 1977-79 CB750K, 1979 CB750L. , When converting from a 630 to 530, the exact chain length needed has not been determined. Keep in mind that at 630 chain has a pitch of 3/4" and a 530 has a 5/8", so 104 links of a 530 chain is about the same 86 pitches of a 630 chain (104 x 6.25=65", 86 x .75= 64.5") The other factor to consider is that 530 sprockets of the same tooth size are smaller in diameter that 630, so less length is needed to wrap around it. A safe formula to use is the multiply the number of links used of your 630 set up by 1.2 when converting to 530, and shorten the chain as necessary when fitting it on the motorcycle . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2532348
Expected Soon

More Info/Options for Sunstar Sprocket 2532348

$38.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2533236
Manufacturer: Sunstar
Dennis Kirk Part #: 8001136S
Sunstar Sprocket: Manufacturer part # 2533236 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2533236
1 on hand

More Info/Options for Sunstar Sprocket 2533236

$49.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2533243
Manufacturer: Sunstar
Dennis Kirk Part #: 8001143S
Sunstar Sprocket: Manufacturer part # 2533243 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2533243
1 on hand

More Info/Options for Sunstar Sprocket 2533243

$49.99 Metric Bikes > Chains & Sprockets > Sprockets: Sunstar Sprocket 2533244
Manufacturer: Sunstar
Dennis Kirk Part #: 8001144S
Sunstar Sprocket: Manufacturer part # 2533244 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Anytime you use other that the standard sprocket size, clearance must be checked . , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2533244