TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Pro Tek Frame Protectors p614709, Pro Tek Frame Protectors p614728

$1609.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p582885 583162 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583162 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p582885 - DennisKirk Part # 583162 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 10" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p582885 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p582885 583162

$1804.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p582885 583158 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583158 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p582885 - DennisKirk Part # 583158 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 6" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p582885 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p582885 583158

$2027.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p582885 583156 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583156 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p582885 - DennisKirk Part # 583156 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 6" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p582885 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p582885 583156

$1804.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p582885 583155 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583155 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p582885 - DennisKirk Part # 583155 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 6" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p582885 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p582885 583155

$1495.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p588271 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583159 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p588271 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 6" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches fo wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Feature the TracDynamics "mechanical polish" finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588271 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p588271

$1495.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p588271 583160 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583160 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p588271 - DennisKirk Part # 583160 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 10" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches fo wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Feature the TracDynamics "mechanical polish" finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588271 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p588271 583160

$1652.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended Standard Swingarm p588271 583157 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583157 Trac Dynamics Extended Standard Swingarm : Manufacturer part # p588271 - DennisKirk Part # 583157 - Put that power to the ground with an extended swingarm. Lengthens the wheelbase 6" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches fo wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Feature the TracDynamics "mechanical polish" finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588271 1 on hand More Info/Options for Trac Dynamics Extended Standard Swingarm p588271 583157

$2179.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended 240 Big Wheel Swingarm p588277 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583169 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277

$2179.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583167 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583167 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - DennisKirk Part # 583167 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583167

$3039.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583164 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583164 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - DennisKirk Part # 583164 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583164

$2849.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583165 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583165 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - DennisKirk Part # 583165 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583165

$2849.99 Metric Bikes > Body > Bodywork: Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583171 Manufacturer: Trac Dynamics Dennis Kirk Part #: 583171 Trac Dynamics Extended 240 Big Wheel Swingarm: Manufacturer part # p588277 - DennisKirk Part # 583171 - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. p588277 1 on hand More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm p588277 583171

$58.99 Metric Bikes > Body > Bodywork: Pro Tek Frame Protectors p614709 Manufacturer: Pro Tek Dennis Kirk Part #: 516614 Pro Tek Frame Protectors: Manufacturer part # p614709 - Made from hard Delrin. Available in a variety of colors. Comes with all mounting hardware. Some require fairing modifications. , , Included Items:. , 1. (2) Frame savers. , 2. (2) 10MM-1.25 x 60MM hex head bolts. p614709 2 on hand More Info/Options for Pro Tek Frame Protectors p614709

$123.99 Metric Bikes > Body > Bodywork: Pro Tek Frame Protectors p614709 516606 Manufacturer: Pro Tek Dennis Kirk Part #: 516606 Pro Tek Frame Protectors: Manufacturer part # p614709 - DennisKirk Part # 516606 - Made from hard Delrin. Available in a variety of colors. Comes with all mounting hardware. Some require fairing modifications. , , Included Items:. , 1. (2) Acetal sliders with aluminum bushings. , 2. (2) aluminum mounting bracket (right side has taller post). , 3. (1) 10mm x 1.25 pitch x 80mm bolt(right side, smaller slider with taller post bracket). , 4. (1) 10mm x 1.25 x 80mm bolt (left side, larger slider with shorter bracket). p614709 1 on hand More Info/Options for Pro Tek Frame Protectors p614709 516606