|
|
$379.99
Hindle Stainless Steel Megaphone Muffler 4401072
Dennis Kirk Part #: 4401072
Hindle Stainless Steel Megaphone Muffler 4401072: Manufacturer part # SSMEGA2R6 - Features a highly-polished stainless steel megaphone muffler with non-removalble, chromed stainless steel end cap. Order two components: , Mid-pipe and megaphone muffler, , For use with stock headpipes works with Mid-pipe Part Numbers 44-0764, 4400765-, and 44-004763, 44-01917 depending on Make/Model/Year of bike. NOTE: Cutting of bodywork required Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. SSMEGA2R6
1 on Hand
More Info/Options for Hindle Stainless Steel Megaphone Muffler 4401072
|
|
|
|
$493.99
Hindle 16 in. Oval Carbon Fiber Undertail Muffler with Stealth Baffle 4400715
Dennis Kirk Part #: 4400715
Hindle 16 in. Oval Carbon Fiber Undertail Muffler with Stealth Baffle 4400715: Manufacturer part # CFR142OVU - Muffler mounts only to Hindle front header sections or Hindle slip-on midpipe (See chart below). Oval Muffler is 16" long with carbon fiber canister. Stealth street baffle. Sold each, , For 4-2-1 system, order undertail headpipe with mid-pipe , - please refer to Part number for description and price ZX600N/ZX636C/D Ninja ZX-6R/RR 2005-2006, -Part No. 4400741 , , For Slip-on muffler, order undertail mid-pipe , - please refer to Part number for description and price ZX600N/ZX636C/D Ninja ZX-6R/RR 2005-2006, -Part No. 44-00735 (Stainless Steel), -Part No. 44-00727 (Titanium) Triumph Daytona 675 2006-2007, -Part No. 4401924 , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. CFR142OVU
1 on Hand
More Info/Options for Hindle 16 in. Oval Carbon Fiber Undertail Muffler with Stealth Baffle 4400715
|
|
|
|
CLEARANCE!
Was: $303.99
Now: $227.99
Hindle Oval Aluminum Undertail Muffler with Supersport Baffle 449008
Dennis Kirk Part #: 449008
Hindle Oval Aluminum Undertail Muffler with Supersport Baffle 449008: Manufacturer part # GPR162OVU - Muffler mounts only to Hindle front header sections or Hindle slip-on midpipe (See chart below). Oval Muffler is 16" long with aluminum canister. Supersport race baffle. Sold each, , For 4-2-1 system, order undertail headpipe with mid-pipe , - please refer to Part number for description and price CBR600RR 2005-2006, Part No. 4400738 CBR1000RR 2006, Part No. 4400740 , , For Slip-on muffler, order undertail mid-pipe , - please refer to Part number for description and price CBR600RR 2003-2004, Part No. 44-8351 CBR600RR 2005-2006, Stainless steel-Part No. 44-00732, Titanium-Part No. 44-00725 CBR1000RR 2004-2005, Part No. 44-9353 CBR1000RR 2006, Part No. 44-00734 , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. GPR162OVU
1 on Hand
More Info/Options for Hindle Oval Aluminum Undertail Muffler with Supersport Baffle 449008
|
|
|
|
|
|
$9.99
Black Pro Grip 737 Dual Sport Grips
Dennis Kirk Part #: 590463
Black Pro Grip 737 Dual Sport Grips: Manufacturer part # 737 - Innovative grip used by World Championship competitors. Angled line design. Thicker design dampens vibration. Three wire-tie grooves. 32mm o.d. x 125 mm long (1 1/4 in. x 5 in.) for twist throttles. , Innovative, industry-leading Pro Grips utilize special materials and grip patterns to provide a confidence-inspiring feel. Technologically advanced Gel material is derived from rubber compounds used in ultra-competitive Formula One car racing. Supple yet rugged grips provide unmatched comfort, response and longevity. All have high-impact plastic end caps and are open-ended style. For 7/8 in. bars. Made in Italy.. 737
10+ on hand
More Info/Options for Black Pro Grip 737 Dual Sport Grips
|
|
|
|
$942.99
Kerker K-Series 4-2-1 Silver w/Aluminum Canister 44844
Dennis Kirk Part #: 44844
Kerker K-Series 4-2-1 Silver w/Aluminum Canister 44844: Manufacturer part # 12941200 - White tips silver header coating chemically bonds with the metal, forming a protective skin impervious to corrosion, discoloration and heat up to 2,000 deg. F. K-Series advantages include up to 12 percent increase in horsepower, 10 lb. to 25 lb. weight savings and improved corner clearance . Retains oil filter access. 4-into-2-into-1. Requires removal of centerstand mounting tabs, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 12941200
Expected Soon
More Info/Options for Kerker K-Series 4-2-1 Silver w/Aluminum Canister 44844
|
|
|
|
$131.99
Kerker 2.5 in. Competition/Billet End Cap and Baffle for K-Series Exhaust 441197
Dennis Kirk Part #: 441197
Kerker 2.5 in. Competition/Billet End Cap and Baffle for K-Series Exhaust 441197: Manufacturer part # 1006400 - Kerker offers an assortment of baffles to suit all street riders and racers. All are fiberglass wrapped and come complete with end cap. For K-Series Systems and Slip-Ons. Available in 2.5 in. competition with billet caps. For all one-piece extruded exhaust canisters, not older welded-style pipes. Check silencer identification letters on hanger bracket - KA, KB, KC, KD, KE, KF, KG are 2 in. inlet; KH, KI, KK, KL are 2.5 in. inlet.. 1006400
2 on Hand
More Info/Options for Kerker 2.5 in. Competition/Billet End Cap and Baffle for K-Series Exhaust 441197
|
|
|
|
|
|
$645.99
Kerker K-Series 4-1 Chrome Header w/Aluminum Canister 4323
Dennis Kirk Part #: 4323
Kerker K-Series 4-1 Chrome Header w/Aluminum Canister 4323: Manufacturer part # 12831100 - Horsepower gains up to 12% while weighing 10 to 25 lbs. less than stock. All K-series features lightweight aluminum silencers with satin finish. Baffles are easily repacked and replaced. Retain centerstand and oil filter access. , , Rejetting is recommended with this exhaust, ,. Exhaust gaskets are not included but are recommended everytime a new system is installed, this system requires four of our part #26-1063, ,. Customer must use stock rear head pipes and take off rear exhaust collector box , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 12831100
1 on Hand
More Info/Options for Kerker K-Series 4-1 Chrome Header w/Aluminum Canister 4323
|
|
|
|
|
|
$973.99
Kerker K-Series 4-2-1 Chrome w/Aluminum Canister 44248
Dennis Kirk Part #: 44248
Kerker K-Series 4-2-1 Chrome w/Aluminum Canister 44248: Manufacturer part # 12841200 - Features high quality chrome and the K-2-style end cap. K-Series advantages include up to 12 percent increase in horsepower, 10 lb. to 25 lb. weight savings and improved corner clearance. Retains oil filter access. 4-into-2-into-1. Requires removal of centerstand mounting tabs, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 12841200
Expected Soon
More Info/Options for Kerker K-Series 4-2-1 Chrome w/Aluminum Canister 44248
|
|
|
|
$114.99
Kerker 1.5 in. Standard/Standard Cap K-Series Baffle 43782
Dennis Kirk Part #: 43782
Kerker 1.5 in. Standard/Standard Cap K-Series Baffle 43782: Manufacturer part # 1006397 - Kerker offers an assortment of baffles to suit all street riders and racers. All are fiberglass wrapped and come complete with end cap. For K-Series Systems and Slip-Ons. Available in 1.5 in. standard (formerly Comp 3X) w/ standard end cap (our 43782) or turn-down tip cap (our 43948). For all one-piece extruded exhaust canisters, not older welded-style pipes. Check silencer identification letters on hanger bracket - KA, KB, KC, KD, KE, KF, KG are 2 in. inlet; KH, KI, KK, KL are 2.5 in. inlet.. 1006397
Expected Soon
More Info/Options for Kerker 1.5 in. Standard/Standard Cap K-Series Baffle 43782
|
|
|
|
$155.99
Kerker 2.0 in. Competition /Billet End Cap and Baffle for K-Series Exhaust 441194
Dennis Kirk Part #: 441194
Kerker 2.0 in. Competition /Billet End Cap and Baffle for K-Series Exhaust 441194: Manufacturer part # 1006395 - Kerker offers an assortment of baffles to suit all street riders and racers. All are fiberglass wrapped and come complete with end cap. For K-Series Systems and Slip-Ons. Available in 2 in. with billet caps. For all one-piece extruded exhaust canisters, not older welded-style pipes. Check silencer identification letters on hager bracket - KA, KB, KC, KD, KE, KF, KG are 2 in. inlet; KH, KI, KK, KL are 2.5 in. inlet.. 1006395
1 on Hand
More Info/Options for Kerker 2.0 in. Competition /Billet End Cap and Baffle for K-Series Exhaust 441194
|
|
|
|
|
|
|
|
$847.99
Kerker Black 4-into-1 Stainless Steel Megaphone Exhaust System 446995
Dennis Kirk Part #: 446995
Kerker Black 4-into-1 Stainless Steel Megaphone Exhaust System 446995: Manufacturer part # 12761106 - The original and still the best choice for 70s to 80s in-line fours. Increased cornering clearance and horsepower coupled with a lighter system results in unbelievable performance. Retains centerstand, oil filter and drain access. Electrostatically applied Ceramicoat 2500. Includes street type baffle. Some carburetor re-jetting may be required. , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 12761106
1 on Hand
More Info/Options for Kerker Black 4-into-1 Stainless Steel Megaphone Exhaust System 446995
|
|
|
|
|
|
$625.99
Kerker Chrome Megaphone Exhaust System 4306
Dennis Kirk Part #: 4306
Kerker Chrome Megaphone Exhaust System 4306: Manufacturer part # 12830748 - The original and still the best choice for 70s to 80s in-line fours. Increased cornering clearance and horsepower coupled with a lighter system results in unbelievable performance. Retains centerstand, oil and drain access. Electrostatically applied Ceramicoat 2500. Includes street type baffle. Some carburetor re-jetting may be required, , . Exhaust gaskets are not included but are recommended everytime a new system is installed. This system requires four of our part #26-1061, ,. For Honda CB750K 1969-78 the right-hand (when sitting on the bike) rear footpeg must be removed , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 12830748
1 on Hand
More Info/Options for Kerker Chrome Megaphone Exhaust System 4306
|
|
|
|
|
|
|
|
|
|
$74.95
Drag Specialties Teardrop Mirrors 392439
Dennis Kirk Part #: 392439
Drag Specialties Teardrop Mirrors 392439: Manufacturer part # MT76301B4 - Custom-mirror design at a great price. Aluminum die-cast construction, polished and chrome plated. Includes mounting hardware, sold in pairs. Glass Size: 5 1/5 in. W x 1 13/16 in. H Stem Length: 3 and 4 1/4 in./2 and 4 in. Method of Attachment: 5/16 in. x 18 x 1 in./ 1 1/2 RH Thread. NOTE: For metric crusiers - mirror adapters use part number H39009 or H39010. MT76301B4
| |
