Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Drag Specialties Drag Flame 1 1, Drag Specialties 10 in, Dimpled 1 in

$149.95 Discount Drag Specialties Buffalo Bagger Style Bar for Springers 300339 Manufacturer: Drag Specialties Dennis Kirk Part #: H59769 Drag Specialties Buffalo Bagger Style Bar for Springers: Manufacturer part # 300339 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A.. Bar is drilled and knurled. Knurling is 5 in. on center, , This is the top bar in photo, , 1" Diameter Clamping Width: 6 3/4 in., Inside Width of Knurling/outside: 4 1/16 in. / 5 7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300339 1 on hand More Info/Options for Drag Specialties Buffalo Bagger Style Bar for Springers 300339

$149.95 Discount Drag Specialties Buffalo 9 1/2 in. Apehanger Bar 300340 Manufacturer: Drag Specialties Dennis Kirk Part #: H59770 Drag Specialties Buffalo 9 1/2 in. Apehanger Bar: Manufacturer part # 300340 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A., , 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameters. 300340 1 on hand More Info/Options for Drag Specialties Buffalo 9 1/2 in. Apehanger Bar 300340

$149.95 Discount Drag Specialties Buffalo 9 1/2 in. Apehanger Bar for Springers 300341 Manufacturer: Drag Specialties Dennis Kirk Part #: H59771 Drag Specialties Buffalo 9 1/2 in. Apehanger Bar for Springers: Manufacturer part # 300341 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A., , 1" Diameter Clamping Width: 6-3/4 in., Inside Width of Knurling/Outside: 4-/16 in. / 5-7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300341 2 on hand More Info/Options for Drag Specialties Buffalo 9 1/2 in. Apehanger Bar for Springers 300341

$149.95 Discount Drag Specialties Buffalo 10 in. Apehanger Bar 300342 Manufacturer: Drag Specialties Dennis Kirk Part #: H59772 Drag Specialties Buffalo 10 in. Apehanger Bar: Manufacturer part # 300342 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300342 1 on hand More Info/Options for Drag Specialties Buffalo 10 in. Apehanger Bar 300342

$149.95 Discount Drag Specialties Buffalo 12 1/2 in. Apehanger Bar 300343 Manufacturer: Drag Specialties Dennis Kirk Part #: H59773 Drag Specialties Buffalo 12 1/2 in. Apehanger Bar: Manufacturer part # 300343 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A., , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300343 4 on hand More Info/Options for Drag Specialties Buffalo 12 1/2 in. Apehanger Bar 300343

$149.95 Discount Drag Specialties Buffalo 16 in. Apehanger Bar 300344 Manufacturer: Drag Specialties Dennis Kirk Part #: H59774 Drag Specialties Buffalo 16 in. Apehanger Bar: Manufacturer part # 300344 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A., , Width: 37 in., Rise: 16 in., Pullback: 10 in., Center Width: 10 1/2 in., End Rise: 17 in., 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes, , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300344 2 on hand More Info/Options for Drag Specialties Buffalo 16 in. Apehanger Bar 300344

$149.95 Discount Drag Specialties 12.5 in. Ape Hanger Bar for Springers 300345 Manufacturer: Drag Specialties Dennis Kirk Part #: H59136 Drag Specialties 12.5 in. Ape Hanger Bar for Springers: Manufacturer part # 300345 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Thick, 1 1/4 in. risers are also available to complete the Buffalo look. Made in the U.S.A., , Note: , OEM-style handlebar clamps will not fit bars with 1 1/4 in. risers, , 1 in. Diameter Clamping Width: 6-3/4 in., Inside Width of Knurling/outside: 4-1/16 in. / 5-7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300345 2 on hand More Info/Options for Drag Specialties 12.5 in. Ape Hanger Bar for Springers 300345

$93.95 Discount Drag Specialties 6 in. Dimpled 1 in. T-Bar 300400 Manufacturer: Drag Specialties Dennis Kirk Part #: H59600 Drag Specialties 6 in. Dimpled 1 in. T-Bar: Manufacturer part # 300400 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300400 1 on hand More Info/Options for Drag Specialties 6 in. Dimpled 1 in. T-Bar 300400

$93.95 Discount Drag Specialties 8 in. Dimpled 1 in. T-Bar 300401 Manufacturer: Drag Specialties Dennis Kirk Part #: H59601 Drag Specialties 8 in. Dimpled 1 in. T-Bar: Manufacturer part # 300401 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300401 2 on hand More Info/Options for Drag Specialties 8 in. Dimpled 1 in. T-Bar 300401

$93.95 Discount Drag Specialties 10 in. Dimpled 1 in. T-Bar 300402 Manufacturer: Drag Specialties Dennis Kirk Part #: H59604 Drag Specialties 10 in. Dimpled 1 in. T-Bar: Manufacturer part # 300402 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300402 2 on hand More Info/Options for Drag Specialties 10 in. Dimpled 1 in. T-Bar 300402

$93.95 Discount Drag Specialties 6 in Dimpled and Drilled 1 in. T-Bar 300403 Manufacturer: Drag Specialties Dennis Kirk Part #: H59605 Drag Specialties 6 in Dimpled and Drilled 1 in. T-Bar: Manufacturer part # 300403 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300403 3 on hand More Info/Options for Drag Specialties 6 in Dimpled and Drilled 1 in. T-Bar 300403

$93.95 Discount Drag Specialties 8 in. Dimpled and Drilled 1 in. T-Bar 300404 Manufacturer: Drag Specialties Dennis Kirk Part #: H59606 Drag Specialties 8 in. Dimpled and Drilled 1 in. T-Bar: Manufacturer part # 300404 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300404 3 on hand More Info/Options for Drag Specialties 8 in. Dimpled and Drilled 1 in. T-Bar 300404

$93.95 Discount Drag Specialties 10 in. Dimpled and Drilled 1 in. T-Bar 300405 Manufacturer: Drag Specialties Dennis Kirk Part #: H59607 Drag Specialties 10 in. Dimpled and Drilled 1 in. T-Bar: Manufacturer part # 300405 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300405 1 on hand More Info/Options for Drag Specialties 10 in. Dimpled and Drilled 1 in. T-Bar 300405

$213.95 Discount Drag Specialties 6 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300451 Manufacturer: Drag Specialties Dennis Kirk Part #: H59137 Drag Specialties 6 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300451 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). T-Bars have 3-1/2 in. center-to-center mount holes. Made in the U.S.A.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300451 2 on hand More Info/Options for Drag Specialties 6 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300451

$213.95 Discount Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300452 Manufacturer: Drag Specialties Dennis Kirk Part #: H59138 Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300452 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; work with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). T-Bars have 3-1/2 in. center-to-center mount holes. Made in the U.S.A... , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300452 2 on hand More Info/Options for Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300452

$215.95 Discount Drag Specialties 10 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300453 Manufacturer: Drag Specialties Dennis Kirk Part #: H59139 Drag Specialties 10 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300453 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A... , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300453 Expected Soon More Info/Options for Drag Specialties 10 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar 300453

$120.95 Discount Drag Specialties Drag Flame 1 1/4 in. Tattoo Handlebar 300454 Manufacturer: Drag Specialties Dennis Kirk Part #: H59143 Drag Specialties Drag Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300454 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A., , Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300454 1 on hand More Info/Options for Drag Specialties Drag Flame 1 1/4 in. Tattoo Handlebar 300454

$224.95 Discount Drag Specialties Classic Style Flame 1 1/4 in. Tattoo Handlebar 300456 Manufacturer: Drag Specialties Dennis Kirk Part #: H59145 Drag Specialties Classic Style Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300456 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A., , Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes.. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883/1200 models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300456 2 on hand More Info/Options for Drag Specialties Classic Style Flame 1 1/4 in. Tattoo Handlebar 300456

$204.95