Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

H591138 Drag Specialties, Drag Specialties 80-Spoke Laced Wheel Assembly 551109

$187.95 Drag Specialties 40-Spoke Chrome Steel Wheel 551082 Dennis Kirk Part #: 551082 Drag Specialties 40-Spoke Chrome Steel Wheel 551082: Manufacturer part # 02100021 - Chrome 40-spoke DOT approved rims. Lace to your stock, OEM-type hubs and use the same spoke sets as Excel aluminum rims. The same top-quality rims used in Drag Specialties' complete wheel assemblies. Center metal valve stem design. Made in the U.S.A. by Road Wings Design Inc... 02100021 1 on Hand More Info/Options for Drag Specialties 40-Spoke Chrome Steel Wheel 551082

$8.95 H591145 Drag Specialties 1.3750" Wide Chrome Outer Axle Spacer Dennis Kirk Part #: H591145 H591145 Drag Specialties 1.3750" Wide Chrome Outer Axle Spacer: Manufacturer part # 223063PCBC11 - Made from cold-rolled steel that was polished then chrome plated. Machined to 1 1/4 in. o.d. and 3/4 in. i.d.. Sold each. , NOTE: Width: 1.3750 in.. 223063PCBC11 3 on Hand More Info/Options for H591145 Drag Specialties 1.3750" Wide Chrome Outer Axle Spacer

$181.95 Drag Specialties 40-Spoke Chrome Rim 551080 Dennis Kirk Part #: 551080 Drag Specialties 40-Spoke Chrome Rim 551080: Manufacturer part # 02100019 - Chrome 40-spoke DOT approved rims. Lace to your stock, OEM-type hubs and use the same spoke sets as Excel aluminum rims. The same top-quality rims used in Drag Specialties' complete wheel assemblies. Center metal valve stem design. Made in the U.S.A. by Road Wings Design Inc., , NOTE: This item ships in 3-4 days after the order is placed .. 02100019 1 on Hand More Info/Options for Drag Specialties 40-Spoke Chrome Rim 551080

$689.95 Drag Specialties 80-Spoke Laced Wheels Assembly 551151 Dennis Kirk Part #: 551151 Drag Specialties 80-Spoke Laced Wheels Assembly 551151: Manufacturer part # 02030068 - Manufactured exclusively for Drag Specialties by Road Wings Design, Inc.. High-quality wheel assemblies made in U.S.A.. Billet chromed custom aluminum hubs. Chrome-plated steel rims. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer included, but not installed, so you can set the bearing end play to your specifications and choose your wheel-bearing grease. Trued to less than .005 in. runout. DOT approved. Available for most popular models. Uses a side metal valve stem. NOTE: This item ships in 3-4 days after the order is placed. 02030068 1 on Hand More Info/Options for Drag Specialties 80-Spoke Laced Wheels Assembly 551151

$778.95 Drag Specialties 80-Spoke Laced Wheel Assembly 551109 Dennis Kirk Part #: 551109 Drag Specialties 80-Spoke Laced Wheel Assembly 551109: Manufacturer part # 02030040 - Manufactured exclusively for Drag Specialties by Road Wings Design, Inc.. High-quality wheel assemblies made in U.S.A.. Billet chromed custom aluminum hubs. Chrome-plated steel rims. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer included, but not installed, so you can set the bearing end play to your specifications and choose your wheel-bearing grease. Trued to less than .005 in. runout. DOT approved. Available for most popular models. Uses a center metal valve stem. NOTE: This item ships in 3-4 days after the order is placed. 02030040 1 on Hand More Info/Options for Drag Specialties 80-Spoke Laced Wheel Assembly 551109

$770.95 Drag Specialties Fat Daddy 50-Spoke Radially Laced Wheel 551106 Dennis Kirk Part #: 551106 Drag Specialties Fat Daddy 50-Spoke Radially Laced Wheel 551106: Manufacturer part # 02030038 - Road Wings, Inc. manufactures these attractive wheels exclusively for Drag Specialties. Include polished chrome steel rims, straight radially laced 3/8 in. polished spokes fitted with custom nipples and chromed billet aluminum custom hubs. Seals, bearings, and center spacer are provided but not installed; this enables you to set the end play to a certain specification as well as use the wheel bearing grease of your choice. Hub width on wide rear wheels is measured from rotor to pulley mounting surfaces. 4.25" wheels will fit most applications by modifying the axle spacers and changing the rotor and pulley spacing. 5.5" and 8.5" wheels will require the above as well; frame, swingarm modification, and fender change along with a narrower belt may also be required. Made in the U.S.A.. NOTE: This item ships 3-4 days after the order is placed. NOTE: Year applications listed for custom rear wheels refer to the style of pulley and rotor to be used with the wheel.. 02030038 1 on Hand More Info/Options for Drag Specialties Fat Daddy 50-Spoke Radially Laced Wheel 551106

$887.95 18 x 5.5 Drag Specialties 60-Spoke Laced Wheel Assemblies Dennis Kirk Part #: 552679 18 x 5.5 Drag Specialties 60-Spoke Laced Wheel Assemblies: Manufacturer part # 02040225 - High-quality American-made wheel assemblies. Billet chromed custom aluminum hubs. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer are included but not installed, allowing you to set the bearing end play to your specifications and use your preferred wheel-bearing grease. DOT-approved and trued out to less than .005 in. runout. Uses a side metal valve stem. Note: This item ships in 3-4 days after the order is placed.. 02040225 1 on Hand More Info/Options for 18 x 5.5 Drag Specialties 60-Spoke Laced Wheel Assemblies

$6.95 H591138 Drag Specialties .5000" Wide Chrome Outer Axle Spacer Dennis Kirk Part #: H591138 H591138 Drag Specialties .5000" Wide Chrome Outer Axle Spacer: Manufacturer part # 223054PCBC11 - Made from cold-rolled steel that was polished then chrome plated. Machined to 1 1/4 in. o.d. and 3/4 in. i.d.. Sold each. , NOTE: Width: .5000 in.. 223054PCBC11 5 on Hand More Info/Options for H591138 Drag Specialties .5000" Wide Chrome Outer Axle Spacer

$16.95 H59234 Drag Specialties Stainless Steel Axle Adjuster Plate Dennis Kirk Part #: H59234 H59234 Drag Specialties Stainless Steel Axle Adjuster Plate: Manufacturer part # 339105BC204 - Protect the chrome or painted surface of your FXR, FXST, FX, FL or XL. Polished finish; sold in pairs.. 339105BC204 4 on Hand More Info/Options for H59234 Drag Specialties Stainless Steel Axle Adjuster Plate

$48.95 H55003 Drag Specialties Chrome Spoke Set Dennis Kirk Part #: H55003 H55003 Drag Specialties Chrome Spoke Set: Manufacturer part # DS380120 - 9 5/8 in. long for 21" steel hub rims . Rims must use special spokes and nipples when laced to OEM-style steel or aluminum hubs. For Drag Specialties spun steel and Excell Aluminum rims. Also work with Akront aluminum rims. Each 40-spoke set includes spoke wrench.. DS380120 2 on Hand More Info/Options for H55003 Drag Specialties Chrome Spoke Set

$14.95 H54009 Drag Specialties Blazing Valve Stem Cap-Green Dennis Kirk Part #: H54009 H54009 Drag Specialties Blazing Valve Stem Cap-Green: Manufacturer part # DS280700 - Caps feature a billet aluminum body with a clear domed head. Unique design has a battery-operated LED. Produce a circle of light when moving and a steady light when parked. Sensor automatically shuts off LED during daylight. Choose from five colors; sold each. , NOTE: Clearance must be checked between rotor and valve stem; not for high-speed use.. DS280700 1 on Hand More Info/Options for H54009 Drag Specialties Blazing Valve Stem Cap-Green

$916.95 18 x 5.5 Drag Specialties 80-Spoke Laced Wheel Assemblies Dennis Kirk Part #: 552680 18 x 5.5 Drag Specialties 80-Spoke Laced Wheel Assemblies: Manufacturer part # 02040226 - High-quality American-made wheel assemblies. Billet chromed custom aluminum hubs. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer are included but not installed, allowing you to set the bearing end play to your specifications and use your preferred wheel-bearing grease. DOT-approved and trued out to less than .005 in. runout. Uses a side metal valve stem. Note: This item ships in 3-4 days after the order is placed.. 02040226 1 on Hand More Info/Options for 18 x 5.5 Drag Specialties 80-Spoke Laced Wheel Assemblies

$840.95 Drag Specialties 40-Spoke Wide Rear Wheel Assembly 551241 Dennis Kirk Part #: 551241 Drag Specialties 40-Spoke Wide Rear Wheel Assembly 551241: Manufacturer part # 02040107 - Feature chrome steel rims with center metal valve stems and chrome aluminum hubs with highly polished stainless steel spokes. Hub width is measured from rotor to pulley mounting surfaces. Stock width hub (6.375") refers to the width of an OEM rear hub on a 86-04 Softail. Unique silicone sealant process allows 16" and 18" spoke wheels to be used without inner tubes. 19" and 21" wheels require the use of an inner tube. Bearings, seals and spacer included. 4.25" wheels will fit most applications by modifying the axle spacers and changing rotor and pulley spacing. 5.5", 6", 7", 8", 8.5" and 9" wheels will require above changes as well; frame, swing arm modification and fender change along with a narrower belt may also be required. Made in the U.S.A.. For custom applications using 00-06 GMA inside out brake/pulley. , , Note: WITH 6.375" HUB, 3/4" AXLE-GMA INSIDE OUT BRAKE AND PULLEY (180/200mm TIRE) NOTE: It is the installer's responsibility to determine the required changes. , Note: 18" x 5.5" sealed bearings, 00-UP NOTE: This item ships 3-4 business days after order is placed. 02040107 1 on Hand More Info/Options for Drag Specialties 40-Spoke Wide Rear Wheel Assembly 551241

$824.95 Drag Specialties 60-Spoke Wide Rear Wheel Assembly 552897 Dennis Kirk Part #: 552897 Drag Specialties 60-Spoke Wide Rear Wheel Assembly 552897: Manufacturer part # 02040231 - Feature chrome steel rims with center metal valve stems and chrome aluminum hubs with highly polished stainless steel spokes. Hub width is measured from rotor to pulley mounting surfaces. Stock width hub (6.375") refers to the width of an OEM rear hub on a 86-04 Softail. Unique silicone sealant process allows 16" and 18" spoke wheels to be used without inner tubes. 19" and 21" wheels require the use of an inner tube. Bearings, seals and spacer included. 4.25" wheels will fit most applications by modifying the axle spacers and changing rotor and pulley spacing. 5.5", 6", 7", 8", 8.5" and 9" wheels will require above changes as well; frame, swing arm modification and fender change along with a narrower belt may also be required. Made in the U.S.A.. For custom applications using 00-06 rotors/pulleys . , , Note:WITH 6.375 in. hub and 1 in. axle NOTE: It is the installer's responsibility to determine the required changes. , Note:16" x 5.5" sealed bearings, 00-UP NOTE: This item ships 3-4 business days after order is placed. 02040231 1 on Hand More Info/Options for Drag Specialties 60-Spoke Wide Rear Wheel Assembly 552897

$778.95 Drag Specialties 80-Spoke Laced Wheel Assembly 551171 Dennis Kirk Part #: 551171 Drag Specialties 80-Spoke Laced Wheel Assembly 551171: Manufacturer part # 02030088 - High-quality American-made wheel assemblies. Billet choromed custom aluminum hubs. Chrome-plated steel rims. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer are included but no installed, allowing you to set bearing end play to your specifications and use your preferred wheel-bearing grease. DOT approved and trued to less than .005 in. runout. Wheel uses a center metal valve stem. NOTE: This item ships in 3-4 days after the order is placed. 02030088 1 on Hand More Info/Options for Drag Specialties 80-Spoke Laced Wheel Assembly 551171

$184.95 H55001 Drag Specialties Chrome Front Hub Assembly Dennis Kirk Part #: H55001 H55001 Drag Specialties Chrome Front Hub Assembly: Manufacturer part # DS380024 - Come with all necessary bearings, spacers, and seals already installed; adjusted for correct end play. , NOTE: Replaces OEM No. 43053-86. DS380024 1 on Hand More Info/Options for H55001 Drag Specialties Chrome Front Hub Assembly

$1.75 H53026 Drag Specialties 19 in. x .75 in. Rim Strips Dennis Kirk Part #: H53026 H53026 Drag Specialties 19 in. x .75 in. Rim Strips: Manufacturer part # DS181510 - Heavy-duty rubber rim strips. First defense against tube chafing. Sizes available for extra-wide applications. Measurements given are for rim diameter and actual width of the rim strips. Sold each.. DS181510 5 on Hand More Info/Options for H53026 Drag Specialties 19 in. x .75 in. Rim Strips

$19.95 Drag Specialties Wheel Bearing and Seal Kit 122111 Dennis Kirk Part #: 122111 Drag Specialties Wheel Bearing and Seal Kit 122111: Manufacturer part # 251002 - Contain all necessary bearings and seals required for each individual wheel application. , Tapered Roller Bearing Specifications , (2) LM67010 Cups (1.781 in. O.D.), (2) LM67048 Cones (.75 in. I.D.), Width of Cone/Cup Assembly: .653 in., (2) D5118 Seal, , NOTE: Follow OEM-prescribed procedures for installing and checking wheel bearing end play.. 251002 10+ on hand More Info/Options for Drag Specialties Wheel Bearing and Seal Kit 122111

$798.95 Drag Specialties 80-Spoke Laced Wheel Assembly 551206 Dennis Kirk Part #: 551206 Drag Specialties 80-Spoke Laced Wheel Assembly 551206: Manufacturer part # 02030108 - High-quality American-made wheel assemblies. Billet chromed custom aluminum hubs. Chrome-plated steel rims. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer are included but no installed, allowing you to set bearing end play to your specifications and use your preferred wheel-bearing grease. DOT approved and trued to less than .005 in. runout. Wheel uses a center metal valve stem. NOTE: This item ships in 3-4 days after the order is placed. 02030108 1 on Hand More Info/Options for Drag Specialties 80-Spoke Laced Wheel Assembly 551206

$696.95 Drag Specialties Fat Daddy 50-Spoke Radially Laced Wheel 551088 Dennis Kirk Part #: 551088 Drag Specialties Fat Daddy 50-Spoke Radially Laced Wheel 551088: Manufacturer part # 02030029 - Include polished chrome steel rims, straight radially laced 3/8" polished stainless steel spokes fitted with custom nipples and chromed billet aluminum custom hubs. Seals, bearings, and center spacer are provided but not installed; this enables you to set the end play to a certain specification as well as use the wheel bearing grease of your choice. Width of hub is measured from rotor to pulley mounting surfaces. Made in the U.S.A.. , , NOTE: It is the installer's responsibility to determine the required changes., , NOTE: Year applications listed for custom rear wheels refer to the style of pulley and rotor to be used with the wheel. NOTE: This item ships 3-4 business days after order is placed. 02030029 1 on Hand More Info/Options for Drag Specialties Fat Daddy 50-Spoke Radially Laced Wheel 551088

$778.95 Drag Specialties 80-Spoke Laced Wheel Assembly 551110 Dennis Kirk Part #: 551110 Drag Specialties 80-Spoke Laced Wheel Assembly 551110: Manufacturer part # 02030041 - Manufactured exclusively for Drag Specialties by Road Wings Design, Inc.. High-quality wheel assemblies made in U.S.A.. Billet chromed custom aluminum hubs. Chrome-plated steel rims. Polished stainless steel spokes with custom smooth nipples. Bearings, seals and center spacer included, but not installed, so you can set the bearing end play to your specifications and choose your wheel-bearing grease. Trued to less than .005 in. runout. DOT approved. Available for most popular models. Uses a center metal valve stem. NOTE: This item ships in 3-4 days after the order is placed. 02030041 1 on Hand More Info/Options for Drag Specialties 80-Spoke Laced Wheel Assembly 551110

$48.95 H55615 Drag Specialties Chrome Spoke Set for Custom Front/Rear Steel Hub Dennis Kirk Part #: H55615 H55615 Drag Specialties Chrome Spoke Set for Custom Front/Rear Steel Hub: Manufacturer part # DS380134 - 7 5/8 in. long for 17" custom rim . Rims must use special spokes and nipples when laced to OEM-style steel or aluminum hubs. For Drag Specialties spun steel and Excel aluminum rims. Also work with Akront aluminum rims. Each 40-spoke set includes spoke wrench.. DS380134 2 on Hand More Info/Options for H55615 Drag Specialties Chrome Spoke Set for Custom Front/Rear Steel Hub

$7.95 H591134 Drag Specialties 1.000" Wide Chrome Outer Axle Spacer Dennis Kirk Part #: H591134 H591134 Drag Specialties 1.000" Wide Chrome Outer Axle Spacer: Manufacturer part # 223059PCBC11 - Made from cold-rolled steel that was polished then chrome plated. Machined to 1 1/4 in. o.d. and 3/4 in. i.d.. Sold each. , NOTE: Width: 1.000 in.. 223059PCBC11