Cobra 2 into 2, Cobra 2 in, Cobra 2-into-2 Slash-Cut Tip 2 in, 2 in

This site contains about 139,902 documents.

View by:

Page: 1 100 200 300 400 510 520 530 540 550 560 570 580 590 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 630 640 650 660 670 680 690 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,600 2,000 3,000 4,000 4,664

CLEARANCE!
Was: $379.99
Now: $284.99
Discount Cobra Slash-down, Slip On Mufflers 1212
Manufacturer: Cobra
Dennis Kirk Part #: 449314
Cobra Slash-down, Slip On Mufflers: Manufacturer part # 1212 - A deeper, more mellow sound than stock. Slip-on design utilizes the stock headpipes. Dual chrome muffler style - one per side. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1212
7 on hand

More Info/Options for Cobra Slash-down, Slip On Mufflers 1212

$355.95 Discount Cobra Classic Slip On Mufflers with Tips 1213
Manufacturer: Cobra
Dennis Kirk Part #: 4400254
Cobra Classic Slip On Mufflers with Tips : Manufacturer part # 1213 - Brilliant chrome finish over high-quality, heavy-gauge steel. A deeper, more mellow sound than stock. Slip-on design utilizes the stock headpipes. Dual chrome muffler style; one per side. Baffles are removable. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1213
Expected Soon

More Info/Options for Cobra Classic Slip On Mufflers with Tips 1213

$229.95 Discount Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 1261
Manufacturer: Cobra
Dennis Kirk Part #: 440262
Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip: Manufacturer part # 1261 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 1 5/8 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Short chrome heat shields included with this system. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product.. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. Exhaust gaskets are not included, but are recommended every time a system is installed. This system requires two of our Part No. 26-1063. INCLUDED ITEMS: (1) Front exhaust. (1) Rear exhaust. (1) 3/4 in. aluminum spacer. (3) 1 3/4 in. heat shields. (1) Instruction sheet.. 1261
Expected Soon

More Info/Options for Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 1261

$279.00 Discount Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipe Exhaust System 1263
Manufacturer: Cobra
Dennis Kirk Part #: 449341
Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipe Exhaust System: Manufacturer part # 1263 - All Cobra Boulevard exhaust systems are designed, tested and rechecked to assure you they fit like a glove, retain the use of center and sidestands, and won't interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Cobra Boulevard Drag Pipes have removable baffles. Cobra jet kit recommended for best performance on carbureted models - a Cobra Fi2000 digital fuel processor should be installed on fuel-injected models. , , Included Items: , (1) Front exhaust, (1) Rear exhaust, (1) Front & rear heat shield with clamps, (1) Bar mounting bracket, (4) Hose clamps, (1) Nut, M10 fine thread, (4) 5/16 in. x 5/8 in. hex bolt, (2) Slider brackets, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1263
2 on hand

More Info/Options for Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipe Exhaust System 1263

$229.95 Discount Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipes Exhaust System 1266
Manufacturer: Cobra
Dennis Kirk Part #: 442625
Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipes Exhaust System: Manufacturer part # 1266 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes and chrome heat shield. All systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Short chrome heat shields included with this system. , , Included Items: , (1) Front exhaust, (1) Rear exhaust, (1) 6mm x 20mm hex bolt, (1) 1/4 in. flat washer, (1) 8mm nut, (3) 2 in. heat shields. NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1266
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipes Exhaust System 1266

$299.95 Discount Cobra 2-into-2 Slash-Cut Tip Drag Pipes Exhaust System 1267
Manufacturer: Cobra
Dennis Kirk Part #: 445853
Cobra 2-into-2 Slash-Cut Tip Drag Pipes Exhaust System: Manufacturer part # 1267 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: Full-length chrome heat shields included with this system. The original crash/radiator guard must be removed to use this system NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1267
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Cut Tip Drag Pipes Exhaust System 1267

$631.95 Discount Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 1269
Manufacturer: Cobra
Dennis Kirk Part #: 444444
Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System: Manufacturer part # 1269 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include headpipes. Slash-Cut Tip Drag Pipes are 2 in. diameter. Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Drag pipes are 6 into 6 design with three pipes exiting on each side. , , Included Items: , (1) Left and right heat shield, (6) W-20 x 1/2 in. Pan screw, (6) 1/4 in. Lock washers, (6) 5/16 in. Flat washers, (6) 5/16 in. Lock washers, (4) 5/16 in. x 3/4 in. Hex bolts, (2) 5/16 in. x 3/4 in. Stainless steel buttonhead screws, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1269
Expected Soon

More Info/Options for Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 1269

$229.95 Discount Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipes Exhaust System 1270
Manufacturer: Cobra
Dennis Kirk Part #: 444445
Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipes Exhaust System: Manufacturer part # 1270 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes and chrome heat shield. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Full length heat shields included. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1270
Expected Soon

More Info/Options for Cobra 2-into-2 Slash-Cut Tip 2 in. Drag Pipes Exhaust System 1270

$229.95 Discount Cobra 2 into 2, 2 in. Slash-Cut Tip Drag Pipes Exhaust System 1271
Manufacturer: Cobra
Dennis Kirk Part #: 444817
Cobra 2 into 2, 2 in. Slash-Cut Tip Drag Pipes Exhaust System: Manufacturer part # 1271 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: Installation of a new exhaust system may change your motorcycle?s fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1271
2 on hand

More Info/Options for Cobra 2 into 2, 2 in. Slash-Cut Tip Drag Pipes Exhaust System 1271

$339.99 Discount Cobra 2-into-2 Slash-Cut Tip Drag Pipes Exhaust System 1274
Manufacturer: Cobra
Dennis Kirk Part #: 430798
Cobra 2-into-2 Slash-Cut Tip Drag Pipes Exhaust System: Manufacturer part # 1274 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1274
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Cut Tip Drag Pipes Exhaust System 1274

$289.95 Discount Cobra Slash-Cut Tip 2 in. Drag Pipes System 1279
Manufacturer: Cobra
Dennis Kirk Part #: 448497
Cobra Slash-Cut Tip 2 in. Drag Pipes System: Manufacturer part # 1279 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include headpipes. Slash-Cut Tip Drag Pipes are 2 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. , , Included Items: , (1) Front and rear exhaust assembly, (1) Front and rear heat shields with clamps, (1) Exhaust mounting bracket, (1) Regulator bracket, (5) 5/16 in. x 5/8 in. hex bolts, (1) M10 bolt, (1) M10 nut, (2) Slider brackets, (1) Rubber plug NOTE: Installation of a new exhaust system may change your motorcycle?s fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 1279
Expected Soon

More Info/Options for Cobra Slash-Cut Tip 2 in. Drag Pipes System 1279

$289.95 Discount Cobra 2 in. Slash-Cut Tip Drag Pipe Exhaust System 1280
Manufacturer: Cobra
Dennis Kirk Part #: 449065
Cobra 2 in. Slash-Cut Tip Drag Pipe Exhaust System: Manufacturer part # 1280 - All Cobra Boulevard exhaust systems are designed, tested and rechecked to assure you they fit like a glove, retain the use of center and sidestands, and won't interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Also include headpipes. All systems exit on the right-hand side of the motorcycle. Cobra Boulevard Drag Pipes have removable baffles. Cobra jet kit recommended for best performance on carbureted models - a Cobra Fi2000 digital fuel processor should be installed on fuel-injected models. , , Included Items: , (1) Front and rear exhaust assembly, (1) Front and rear heat shield with clamps, (1) Exhaust mounting bracket, (1) Regulator bracket, (5) 5/16 in. x 5/8 in. hex bolt, (1) M10 bolt, (1) M10 nut, (2) Slider brackets, (1) Rubber plug, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1280
Expected Soon

More Info/Options for Cobra 2 in. Slash-Cut Tip Drag Pipe Exhaust System 1280

$315.95 Discount Cobra 2-into-2 Slash-Cut Tips Exhaust System 1365SC
Manufacturer: Cobra
Dennis Kirk Part #: 444823
Cobra 2-into-2 Slash-Cut Tips Exhaust System: Manufacturer part # 1365SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Slash-cut muffled systems feature 2 1/2 in. staggered duals; all systems exit on the right-hand side of the motorcycle. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Baffles are nonremovable. Full length chrome heat shields included, , NOTE: Installation of a new exhaust system may change your motorcycle&#