Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Carlini 1 1, H59293 Carlini 1 1, H59294 Carlini 1 1, H59295 Carlini 1 1

$357.99 H59782 Carlini 1 1/2 in. Clean Sweep Tee Bar Dennis Kirk Part #: H59782 H59782 Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1505 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-06 controls. Measure 31 in. wide with 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE:New handlebar busings recommended. CS1505 1 on Hand More Info/Options for H59782 Carlini 1 1/2 in. Clean Sweep Tee Bar

$245.95 Carlini 1 1/4 in. Freeway Flyer Bars 595570 Dennis Kirk Part #: 595570 Carlini 1 1/4 in. Freeway Flyer Bars 595570: Ultimate combination of comfort, control and styling. Sleek bends provide great hand and wrist placement for optimum riding position. Clamps and risers available separately. Made in the U.S.A.. , , Dimensions:. , Width: 39". , Rise: 5 1/4". , Pullback: 8 1/2". , Center Width: 8". , End Rise: 4 1/2". , 1" Diameter Clamping Width: 5 1/8". , Inside Width of Knurling/Outside: 2 11/16". , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: Yes.. 2 on Hand More Info/Options for Carlini 1 1/4 in. Freeway Flyer Bars 595570

$357.99 H59914 Carlini 1 1/2 in. Hoghandle Freeway Bar Dennis Kirk Part #: H59914 H59914 Carlini 1 1/2 in. Hoghandle Freeway Bar: Manufacturer part # HHFWY - These big, 1 1/2 in. o.d. bars are the new look in fat bars. Bars are drilled for internal wiring and dimpled. For use with 82-06 handlebar controls. Must use Carlini risers with Carlini bars (see H59916, H59919, H59920). Road King risers are designed to fit under the OEM handlebar cover; new bushings included- see H59920. Risers and bushings sold separately (except Road King Risers, which come with bushings). Made in the U.S.A.. , NOTE: New bushings are recommended.. HHFWY 1 on Hand More Info/Options for H59914 Carlini 1 1/2 in. Hoghandle Freeway Bar

$357.99 H59913 Carlini 1 1/2 in. Hoghandle Street Bar Dennis Kirk Part #: H59913 H59913 Carlini 1 1/2 in. Hoghandle Street Bar: Manufacturer part # HHSB - These big, 1 1/2 in. o.d. bars are the new look in fat bars. Bars are dimpled and drilled for internal wiring. For use with 82-06 handlebar controls. Must use Carlini risers with Carlini bars, Part No.'s: H59916, H59919 and H59920. Road King risers (H59920) are designed to fit under the OEM handlebar cover; new bushings included. Risers and bushings sold separately (except Road King bushings). Made in the U.S.A.. NOTE: New bushings are recommended.. HHSB 1 on Hand More Info/Options for H59913 Carlini 1 1/2 in. Hoghandle Street Bar

$265.99 H59293 Carlini 1 1/4 in. Super Sweep Tee Bar Dennis Kirk Part #: H59293 H59293 Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SPORTSTER125 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 1/2in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required.. SPORTSTER125 5 on Hand More Info/Options for H59293 Carlini 1 1/4 in. Super Sweep Tee Bar

$265.99 H59294 Carlini 1 1/4 in. Super Sweep Tee Bar Dennis Kirk Part #: H59294 H59294 Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SS1257 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. NOTE: 4 1/2 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. New handlebar busings recommended.. SS1257 1 on Hand More Info/Options for H59294 Carlini 1 1/4 in. Super Sweep Tee Bar

$265.99 H59787 Carlini 1 1/4 in. Clean Sweep Tee Bar Dennis Kirk Part #: H59787 H59787 Carlini 1 1/4 in. Clean Sweep Tee Bar: Manufacturer part # CS1259 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-06 controls. Measure 31 in. wide with 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended. CS1259 2 on Hand More Info/Options for H59787 Carlini 1 1/4 in. Clean Sweep Tee Bar

$265.99 H59783 Carlini 1 1/4 in. Clean Sweep Tee Bar Dennis Kirk Part #: H59783 H59783 Carlini 1 1/4 in. Clean Sweep Tee Bar: Manufacturer part # CS1255 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-06 controls. Measure 31 in. wide with 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended. CS1255 1 on Hand More Info/Options for H59783 Carlini 1 1/4 in. Clean Sweep Tee Bar

$265.99 H59785 Carlini 1 1/4 in. Clean Sweep Tee Bar Dennis Kirk Part #: H59785 H59785 Carlini 1 1/4 in. Clean Sweep Tee Bar: Manufacturer part # CS1257 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-06 controls. Measure 31 in. wide with 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended. CS1257 Expected Soon More Info/Options for H59785 Carlini 1 1/4 in. Clean Sweep Tee Bar

$265.99 H59295 Carlini 1 1/4 in. Super Sweep Tee Bar Dennis Kirk Part #: H59295 H59295 Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SS1259 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 1/2 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required.. SS1259 2 on Hand More Info/Options for H59295 Carlini 1 1/4 in. Super Sweep Tee Bar

$34.99 Carlini Handlebar Riser Adapters 594281 Dennis Kirk Part #: 594281 Carlini Handlebar Riser Adapters 594281: Manufacturer part # BS-3 - Made from chrome-plated billet aluminum; fills the upper triple tree gap. Made for use with standard risers or T-bars. Sold in pairs.. BS-3 1 on Hand More Info/Options for Carlini Handlebar Riser Adapters 594281

$199.99 H59919 Carlini Risers for 1 1/2 in. Hoghandles Dennis Kirk Part #: H59919 H59919 Carlini Risers for 1 1/2 in. Hoghandles: Manufacturer part # HHR-2 - For Hoghandle Bars, Part No. H59913 and H59914. HHR-2 1 on Hand More Info/Options for H59919 Carlini Risers for 1 1/2 in. Hoghandles

$151.99 Carlini 3-D Wire Cover 211397 Dennis Kirk Part #: 211397 Carlini 3-D Wire Cover 211397: Manufacturer part # 1.50WC - Crafted from chrome-plated billet aluminum. Cover hides wire harness and beveled edge on bottom of a 1 1/2 in. T-bar risers. Made in the U.S.A... 1.50WC 1 on Hand More Info/Options for Carlini 3-D Wire Cover 211397

$189.99 Pair Carlini Piston Risers Dennis Kirk Part #: 595571 Pair Carlini Piston Risers: Unique chrome-billet risers. Feature bottom mount clamp bolts for a smooth look. 1 1/2 in. tall; drilled and tapped for 1/2 -13 in. bolts (sold separately). Piston risers available for 1 in., 1 1/4 in. and 1 1/2 in. clamping area. Sold in pairs.. 2 on Hand More Info/Options for Pair Carlini Piston Risers

$151.99 Carlini Springer Top Tree for Fat Bars 594748 Dennis Kirk Part #: 594748 Carlini Springer Top Tree for Fat Bars 594748: Manufacturer part # FSAP - Chrome-plated billet aluminum construction. Allows the use of 1 in. - 1 1/2 in. T-bars with 3 1/2 in. center to be mounted without the riser hanging over the edge of the tree. Also allows the use of any riser/bar combination with 3 1/2 in. centers to be used on Springer models.. FSAP 1 on Hand More Info/Options for Carlini Springer Top Tree for Fat Bars 594748

$151.99 Carlini Springer Top Tree for Fat Bars 594299 Dennis Kirk Part #: 594299 Carlini Springer Top Tree for Fat Bars 594299: Manufacturer part # FSAP - Made with chrome-plated billet aluminum. Mount 1 1/2" T-bars with 3 1/2" center without the riser hanging over the edge of the tree. Also can be used with any 3 1/2" riser/bar combinations.. FSAP 2 on Hand More Info/Options for Carlini Springer Top Tree for Fat Bars 594299

$36.99 H49512 Carlini Bushing Set for Clean Sweep T-Bars Dennis Kirk Part #: H49512 H49512 Carlini Bushing Set for Clean Sweep T-Bars: Manufacturer part # BS-1 - No Further Information Available. BS-1 2 on Hand More Info/Options for H49512 Carlini Bushing Set for Clean Sweep T-Bars

$241.99 Carlini Nacelle Kit For Road King 594623 Dennis Kirk Part #: 594623 Carlini Nacelle Kit For Road King 594623: Manufacturer part # RK3PC-HH - Chrome-plated, high-quality billet aluminum. Allows the use of 1 1/2 in. fat bars or risers on the Road King. Really cleans up the top of headlight nacelle. Nacelle plate, headlight seam spear and fork lock adapter come in kit. Made in the U.S.A... RK3PC-HH 1 on Hand More Info/Options for Carlini Nacelle Kit For Road King 594623

$141.99 Carlini Diamond Risers 595422 Dennis Kirk Part #: 595422 Carlini Diamond Risers 595422: Manufacturer part # DR1 - Chrome-billet risers with style. Feature bottom mount clamp bolts for a smooth look. For use with handlebars with 1 1/4" diameter in the clamping area. 1 1/2" tall. Sold in pairs.. DR1 1 on Hand More Info/Options for Carlini Diamond Risers 595422

$151.99 Carlini 3-D Wire Cover for 1 1/4 in. Bars 212558 Dennis Kirk Part #: 212558 Carlini 3-D Wire Cover for 1 1/4 in. Bars 212558: Manufacturer part # 1.25WC - Crafted from chrome-plated billet aluminum. Cover hides wire harness and beveled edge on bottom of most T-bar risers. For 1 1/4" T-bars. Made in the U.S.A... 1.25WC 1 on Hand More Info/Options for Carlini 3-D Wire Cover for 1 1/4 in. Bars 212558

$356.99 Carlini Super Sweep Tee Bar 595125 Dennis Kirk Part #: 595125 Carlini Super Sweep Tee Bar 595125: Manufacturer part # MSS1509 - 7" rise, 7 1/4" pullback and 31 1/2" wide, chrome-plated Tee bars that are 100mm center to center. Feature greater pullback for a more-raked look. 3" more pullback than Clean Sweep bars. Drilled for internal wiring. For easier wiring, bars come with a pull-through string. For the best possible finish-all welds are smoothed and polished by hand. Bars are protected by top-quality packaging during shipping. , NOTE: New handlebar bushings recommended.. MSS1509 1 on Hand More Info/Options for Carlini Super Sweep Tee Bar 595125

$356.99 Carlini Clean Sweep Tee Bar 595124 Dennis Kirk Part #: 595124 Carlini Clean Sweep Tee Bar 595124: Manufacturer part # MHH7 - Designed with a clean flowing look. 8 in. rise, 4 1/2 in. pullback and 31 1/2 in. wide, chrome-plated Tee bars that are 100mm center-to-center. Drilled for internal wiring. For easier wiring, the bars use rope routed through wiring passages. For the best possible finish-all welds are smoothed and polished by hand. Bars are protected by top-quality packaging during shipping. Made in the U.S.A.. , NOTE: New handlebar bushings are recommended.. MHH7 1 on Hand More Info/Options for Carlini Clean Sweep Tee Bar 595124

$126.99 H251437 Carlini Floater Bar for Dresser Exhaust 97-06 Dennis Kirk Part #: H251437 H251437 Carlini Floater Bar for Dresser Exhaust 97-06: Manufacturer part # FBL - Floater bar provides support for the exhaust system and saddlebags when the rear safety bars are removed. Works equally well for those who want to run leather saddlebags. Make of powder-coated steel for rugged durability. Made in the U.S.A.. Sold in pairs.. FBL 4 on Hand More Info/Options for H251437 Carlini Floater Bar for Dresser Exhaust 97-06

$153.99 H251420 Carlini Floater Bar for Dresser Exhaust 93-96 Dennis Kirk Part #: H251420 H251420 Carlini Floater Bar for Dresser Exhaust 93-96: Manufacturer part # FBE - Floater bar provides support for the exhaust system and saddlebags when the rear safety bars are removed. Works equally well for those who want to run leather saddlebags. Make of powder-coated steel for rugged durability. Includes two chromed billet aluminum side cover inserts. Made in the U.S.A.. Sold in pairs.. FBE Expected Soon More Info/Options for H251420 Carlini Floater Bar for Dresser Exhaust 93-96

$85.99 H27122 Carlini Rear Bumper Eliminator Bar Dennis Kirk Part #: H27122 H27122 Carlini Rear Bumper Eliminator Bar: Manufacturer part # BEB - Here is a replacement for that ugly OEM bumper and rail. Dresses up the rear fender area on 80-06 FLHT/FLT models. Easy to install; comes with all necessary hardware. Made of billet steel with a highly polished chrome finish. Made in the USA.. BEB 4 on Hand More Info/Options for H27122 Carlini Rear Bumper Eliminator Bar