Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Russ Wernimont Designs 4, Russ Wernimont Designs 6

CLOSEOUT! Was: $881.99 Now: $661.49 Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 392573 Dennis Kirk Part #: 392573 Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 392573: Manufacturer part # 14010138 - Eliminate unsightly external struts with these internal strut fenders. Strength and straightness assured from heavy-duty steel construction. Inspected personally by a master fender builder to assure a flawless finish. For custom applications only (not recommended for OEM frames). Made in the U.S.A. Note: Requires welding a mounting plate (included) to the frame before installing the fender. Note: Fender must be pre-fitted before painting Included Items: One taillight assembly with extension wire and instructions Empty 5-pin connector housing 6-Connector H-D wire interface assembly Two Turn Signal extension wires One Plug-in load equalizer Four Pairs 1/4 in.-20 x 1/2 in hex bolts and compression washers Dielectric grease pak. 14010138 1 on Hand More Info/Options for Russ Wernimont Designs Pro Street w/Taillight Custom Rear Fender 392573

$214.99 H39633 Russ Wernimont Designs Long Shot Custom Front Fenders Dennis Kirk Part #: H39633 H39633 Russ Wernimont Designs Long Shot Custom Front Fenders: Manufacturer part # DS-380370 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380370 2 on Hand More Info/Options for H39633 Russ Wernimont Designs Long Shot Custom Front Fenders

$214.99 Russ Wernimont Designs 4.5in. Wide Flared Long Front Fender 392795 Dennis Kirk Part #: 392795 Russ Wernimont Designs 4.5in. Wide Flared Long Front Fender 392795: Manufacturer part # 14010170 - Directly bolt onto Softail fender mounts (6 7/8in. wide). No spacers required. Pre-drilled horizontal bolt pattern. Fits a 90/90 tire with a 21in. wheel. NOTE: Fender must be prefitted before painting.. 14010170 Expected Soon More Info/Options for Russ Wernimont Designs 4.5in. Wide Flared Long Front Fender 392795

$284.99 H39605 Russ Wernimont Designs Gamble Wernimont Rear Fender-7.25 in. W Dennis Kirk Part #: H39605 H39605 Russ Wernimont Designs Gamble Wernimont Rear Fender-7.25 in. W: Manufacturer part # DS-380332 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380332 1 on Hand More Info/Options for H39605 Russ Wernimont Designs Gamble Wernimont Rear Fender-7.25 in. W

$326.99 H39283 Russ Wernimont Designs Longshot Rear Fender-11 in. W x 42 1/2 in. L Dennis Kirk Part #: H39283 H39283 Russ Wernimont Designs Longshot Rear Fender-11 in. W x 42 1/2 in. L: Manufacturer part # DS-380618 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380618 1 on Hand More Info/Options for H39283 Russ Wernimont Designs Longshot Rear Fender-11 in. W x 42 1/2 in. L

CLOSEOUT! Was: $340.95 Now: $255.71 h390207 Russ Wernimont Designs Pro Street 11 in. Wide Wernimont Rear Fender for Swingarm Frames Dennis Kirk Part #: h390207 h390207 Russ Wernimont Designs Pro Street 11 in. Wide Wernimont Rear Fender for Swingarm Frames: Manufacturer part # 1401-0005 - Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. 1401-0005 1 on Hand More Info/Options for h390207 Russ Wernimont Designs Pro Street 11 in. Wide Wernimont Rear Fender for Swingarm Frames

$214.99 H39039 Russ Wernimont Designs 5.50 in. Custom Duster Front Fender Dennis Kirk Part #: H39039 H39039 Russ Wernimont Designs 5.50 in. Custom Duster Front Fender: Manufacturer part # DS-380493 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380493 1 on Hand More Info/Options for H39039 Russ Wernimont Designs 5.50 in. Custom Duster Front Fender

$284.99 H39606 Russ Wernimont Designs Longshot Wernimont Rear Fender-9 in. W Dennis Kirk Part #: H39606 H39606 Russ Wernimont Designs Longshot Wernimont Rear Fender-9 in. W: Manufacturer part # DS-380359 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380359 1 on Hand More Info/Options for H39606 Russ Wernimont Designs Longshot Wernimont Rear Fender-9 in. W

$274.99 H39618 Russ Wernimont Designs Maverick Wernimont Rear Fender-7.25 in. W Dennis Kirk Part #: H39618 H39618 Russ Wernimont Designs Maverick Wernimont Rear Fender-7.25 in. W: Manufacturer part # DS-380328 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. With a passion for design along with pride of craftsmanship, Russ Wernimont Designs is engineering some of the most in demand Harley-Davidson aftermarket parts in the industry; once again setting new standards in custom fabrication. Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380328 1 on Hand More Info/Options for H39618 Russ Wernimont Designs Maverick Wernimont Rear Fender-7.25 in. W

$214.99 Russ Wernimont Designs 6.25 in. Wide Custom Stinger Front Fender for 18 in. Wheels 392588 Dennis Kirk Part #: 392588 Russ Wernimont Designs 6.25 in. Wide Custom Stinger Front Fender for 18 in. Wheels 392588: Manufacturer part # 14010153 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 14010153 1 on Hand More Info/Options for Russ Wernimont Designs 6.25 in. Wide Custom Stinger Front Fender for 18 in. Wheels 392588

$214.99 Russ Wernimont Designs 4.5in. Wide Flared Short Front Fender 392796 Dennis Kirk Part #: 392796 Russ Wernimont Designs 4.5in. Wide Flared Short Front Fender 392796: Manufacturer part # 14010171 - Directly bolt onto Softail fender mounts (6 7/8in. wide). No spacers required. Pre-drilled horizontal bolt pattern. Fits a 90/90 tire with a 21in. wheel. NOTE: Fender must be prefitted before painting.. 14010171 1 on Hand More Info/Options for Russ Wernimont Designs 4.5in. Wide Flared Short Front Fender 392796

$296.99 H39624 Russ Wernimont Designs Midway Rear Fender-8.5 in. W Dennis Kirk Part #: H39624 H39624 Russ Wernimont Designs Midway Rear Fender-8.5 in. W : Manufacturer part # DS-380471 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. All fenders feature wiring tubes. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380471 1 on Hand More Info/Options for H39624 Russ Wernimont Designs Midway Rear Fender-8.5 in. W

$214.99 H39210 Russ Wernimont Designs 6.25 in. Custom Stubby Front Fender Dennis Kirk Part #: H39210 H39210 Russ Wernimont Designs 6.25 in. Custom Stubby Front Fender: Manufacturer part # 1925-2754 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 1925-2754 1 on Hand More Info/Options for H39210 Russ Wernimont Designs 6.25 in. Custom Stubby Front Fender

$214.99 H39634 Russ Wernimont Designs 4.75 in. Custom Gambler Front Fender Dennis Kirk Part #: H39634 H39634 Russ Wernimont Designs 4.75 in. Custom Gambler Front Fender: Manufacturer part # DS-380334 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. DS-380334 1 on Hand More Info/Options for H39634 Russ Wernimont Designs 4.75 in. Custom Gambler Front Fender

$328.99 H39286 Russ Wernimont Designs 2000R-RSd Rear Fender-9 in. W Dennis Kirk Part #: H39286 H39286 Russ Wernimont Designs 2000R-RSd Rear Fender-9 in. W: Manufacturer part # DS-380621 - Russ Wernimont is a cutting edge fabricator with over 26 years of custom metal fabrication experience. Durable and distinguished, these fenders are made of heavy-gauge steel. Built by true craftsmen, each fender uses an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and a flawless finish. Has no wiring tubes. Fenders come undrilled so you can position them to look and work best for your application. Handmade in the U.S.A.. Note: Fender must be prefitted before painting.. DS-380621 2 on Hand More Info/Options for H39286 Russ Wernimont Designs 2000R-RSd Rear Fender-9 in. W

$214.99 Russ Wernimont Designs 6.25 in. Wide Custom Gambler Front Fender for 18 in. Wheels 392587 Dennis Kirk Part #: 392587 Russ Wernimont Designs 6.25 in. Wide Custom Gambler Front Fender for 18 in. Wheels 392587: Manufacturer part # 14010152 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 14010152 1 on Hand More Info/Options for Russ Wernimont Designs 6.25 in. Wide Custom Gambler Front Fender for 18 in. Wheels 392587

$208.99 H39227 Russ Wernimont Designs Rambler Custom Front Fender Dennis Kirk Part #: H39227 H39227 Russ Wernimont Designs Rambler Custom Front Fender: Manufacturer part # 1925-0003 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A Master Fender Builder inspects each fender to ensure straightness, consistency and flawless finish. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 1925-0003 1 on Hand More Info/Options for H39227 Russ Wernimont Designs Rambler Custom Front Fender

$214.99 H39213 Russ Wernimont Designs 4.75 in. Custom Rambler Front Fender Dennis Kirk Part #: H39213 H39213 Russ Wernimont Designs 4.75 in. Custom Rambler Front Fender: Manufacturer part # 1925-2757 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come undrilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. NOTE: Fender must be prefitted before painting.. 1925-2757 2 on Hand More Info/Options for H39213 Russ Wernimont Designs 4.75 in. Custom Rambler Front Fender

$214.99 Russ Wernimont Designs 5 1/2. Wide Flared Long Fender 392798 Dennis Kirk Part #: 392798 Russ Wernimont Designs 5 1/2. Wide Flared Long Fender 392798: Manufacturer part # 14010173 - Directly bolt onto Softail fender mounts (6 7/8in. wide). No spacers required. Pre-drilled horizontal bolt pattern. Fits a 120/70 tire with a 21in. wheel Note: Fender must be prefitted before painting.. 14010173 2 on Hand More Info/Options for Russ Wernimont Designs 5 1/2. Wide Flared Long Fender 392798

$1065.99 H390214 Russ Wernimont Designs Longshot Strutless Rear Fender w/ Taillight 9 in. W Dennis Kirk Part #: H390214 H390214 Russ Wernimont Designs Longshot Strutless Rear Fender w/ Taillight 9 in. W: Manufacturer part # 1401-0012 - Eliminate unsightly external struts with these internal strut fenders. Strength and straightness assured from heavy-duty steel construction. Inspected personally by a master fender builder to assure a flawless finish. For custom applications only (not recommended for OEM frames). Made in the U.S.A. , , Requires welding a mounting plate (included) to the frame before installing the fender. Must be pre-fitted before painting. This item ships 3-4 days after the order is placed.. 1401-0012 1 on Hand More Info/Options for H390214 Russ Wernimont Designs Longshot Strutless Rear Fender w/ Taillight 9 in. W

$328.99 Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender 392515 Dennis Kirk Part #: 392515 Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender 392515: Manufacturer part # DS-380625 - Heavy-gauge steel construction. Each fender is inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fender comes undrilled so you can position them to look and work best for your application. Measure 37 1/2" L x 13" W. Handmade in the U.S.A .. Note: Fender must be prefitted before painting.. DS-380625 1 on Hand More Info/Options for Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender 392515

$214.99 Russ Wernimont Designs 6.25 in. Wide Custom Stubby Front Fender for 18 in. Wheels 392584 Dennis Kirk Part #: 392584 Russ Wernimont Designs 6.25 in. Wide Custom Stubby Front Fender for 18 in. Wheels 392584: Manufacturer part # 14010149 - Stylish and sturdy, these beautiful fenders are made of heavy-gauge steel. Built by craftsmen with an absolute minimum of finishing bodywork. A master fender builder inspects each fender to ensure straightness, consistency and flawless finish. Fenders come un-drilled so you can position it to look and work best for your Application. Handmade in the U.S.A.. Inside Width at Mounting Point: 6 1/8 in.. NOTE: Fender must be prefitted before painting.. 14010149