HJC AC-12 Helmet 528-601, HJC AC-12 Helmet 528-602

This site contains about 137,437 documents.

View by:

Page: 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,520 1,530 1,540 1,550 1,560 1,570 1,580 1,590 1,600 1,608 1,609 1,610 1,611 1,612 1,613 1,614 1,615 1,616 1,617 1,618 1,619 1,620 1,621 1,622 1,623 1,624 1,625 1,626 1,627 1,628 1,629 1,630 1,631 1,632 1,633 1,634 1,635 1,636 1,637 1,640 1,650 1,660 1,670 1,680 1,690 1,700 1,710 1,720 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 3,000 4,000 4,582

$206.99 Discount HJC AC-12 Helmet 528-601
Manufacturer: HJC
Dennis Kirk Part #: 3301421XS
HJC AC-12 Helmet: Manufacturer part # 528-601 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-601
1 on hand

More Info/Options for HJC AC-12 Helmet 528-601

$206.99 Discount HJC AC-12 Helmet 528-602
Manufacturer: HJC
Dennis Kirk Part #: 3301421S
HJC AC-12 Helmet: Manufacturer part # 528-602 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-602
1 on hand

More Info/Options for HJC AC-12 Helmet 528-602

$206.99 Discount HJC AC-12 Helmet 528-603
Manufacturer: HJC
Dennis Kirk Part #: 3301421M
HJC AC-12 Helmet: Manufacturer part # 528-603 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-603
1 on hand

More Info/Options for HJC AC-12 Helmet 528-603

$206.99 Discount HJC AC-12 Helmet 528-604
Manufacturer: HJC
Dennis Kirk Part #: 3301421L
HJC AC-12 Helmet: Manufacturer part # 528-604 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-604
1 on hand

More Info/Options for HJC AC-12 Helmet 528-604

$206.99 Discount HJC AC-12 Helmet 528-605
Manufacturer: HJC
Dennis Kirk Part #: 3301421XL
HJC AC-12 Helmet: Manufacturer part # 528-605 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-605
1 on hand

More Info/Options for HJC AC-12 Helmet 528-605

$206.99 Discount HJC AC-12 Helmet 528-606
Manufacturer: HJC
Dennis Kirk Part #: 3301421XXL
HJC AC-12 Helmet: Manufacturer part # 528-606 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-606
1 on hand

More Info/Options for HJC AC-12 Helmet 528-606

CLEARANCE!
Was: $211.99
Now: $158.99
Discount HJC AC-12 Helmet 528-621
Manufacturer: HJC
Dennis Kirk Part #: 3301423XS
HJC AC-12 Helmet: Manufacturer part # 528-621 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-621
7 on hand

More Info/Options for HJC AC-12 Helmet 528-621

CLEARANCE!
Was: $211.99
Now: $158.99
Discount HJC AC-12 Helmet 528-622
Manufacturer: HJC
Dennis Kirk Part #: 3301423S
HJC AC-12 Helmet: Manufacturer part # 528-622 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-622
More than 10 on hand

More Info/Options for HJC AC-12 Helmet 528-622

CLEARANCE!
Was: $211.99
Now: $158.99
Discount HJC AC-12 Helmet 528-623
Manufacturer: HJC
Dennis Kirk Part #: 3301423M
HJC AC-12 Helmet: Manufacturer part # 528-623 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-623
More than 10 on hand

More Info/Options for HJC AC-12 Helmet 528-623

CLEARANCE!
Was: $211.99
Now: $158.99
Discount HJC AC-12 Helmet 528-624
Manufacturer: HJC
Dennis Kirk Part #: 3301423L
HJC AC-12 Helmet: Manufacturer part # 528-624 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-624
More than 10 on hand

More Info/Options for HJC AC-12 Helmet 528-624

CLEARANCE!
Was: $211.99
Now: $158.99
Discount HJC AC-12 Helmet 528-625
Manufacturer: HJC
Dennis Kirk Part #: 3301423XL
HJC AC-12 Helmet: Manufacturer part # 528-625 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-625
9 on hand

More Info/Options for HJC AC-12 Helmet 528-625

CLEARANCE!
Was: $211.99
Now: $158.99
Discount HJC AC-12 Helmet 528-626
Manufacturer: HJC
Dennis Kirk Part #: 3301423XXL
HJC AC-12 Helmet: Manufacturer part # 528-626 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-626
3 on hand

More Info/Options for HJC AC-12 Helmet 528-626

CLEARANCE!
Was: $215.99
Now: $161.99
Discount HJC AC-12 Axis MC-1 Helmet 530-911
Manufacturer: HJC
Dennis Kirk Part #: 3301424XS
HJC AC-12 Axis MC-1 Helmet: Manufacturer part # 530-911 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 530-911
1 on hand

More Info/Options for HJC AC-12 Axis MC-1 Helmet 530-911

CLEARANCE!
Was: $215.99
Now: $161.99
Discount HJC AC-12 Axis MC-1 Helmet 530-912
Manufacturer: HJC
Dennis Kirk Part #: 3301424S
HJC AC-12 Axis MC-1 Helmet: Manufacturer part # 530-912 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 530-912
2 on hand

More Info/Options for HJC AC-12 Axis MC-1 Helmet 530-912

CLEARANCE!
Was: $215.99
Now: $161.99
Discount HJC AC-12 Axis MC-1 Helmet 530-913
Manufacturer: HJC
Dennis Kirk Part #: 3301424M
HJC AC-12 Axis MC-1 Helmet: Manufacturer part # 530-913 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 530-913
1 on hand

More Info/Options for HJC AC-12 Axis MC-1 Helmet 530-913

CLEARANCE!
Was: $215.99
Now: $161.99
Discount HJC AC-12 Axis MC-1 Helmet 530-915
Manufacturer: HJC
Dennis Kirk Part #: 3301424XL
HJC AC-12 Axis MC-1 Helmet: Manufacturer part # 530-915 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exha