|
Dynojet Power Commander III USB 424411
|
|
 |
|
|
|
Dynojet Power Commander III USB 424411
|
This site contains about 138,337 documents.
|
|
View by:
Title
|
Brand
|
Category
|
Type
|
Price
|
Part Number
|
|
Page:
1
100
200
300
400
500
600
700
800
920
930
940
950
960
970
980
990
1,000
1,012
1,013
1,014
1,015
1,016
1,017
1,018
1,019
1,020
1,021
1,022
1,023
1,024
1,025
1,026
1,027
1,028
1,029
1,030
1,031
1,032
1,033
1,034
1,035
1,036
1,037
1,038
1,039
1,040
1,041
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
3,000
4,000
4,612
|
|
|
$61.99
Discount Dynojet Stage 1 & 2 Jet Kit 4176
Manufacturer: Dynojet
Dennis Kirk Part #: 172494
Dynojet Stage 1 & 2 Jet Kit: Manufacturer part # 4176 - This kit contains enough jets to be used as either the Stage 1 or Stage 2 kit. Stage 1: Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range. Stage 2: For motorcycles with stock or slightly modified engines that have well-designed stock or aftermarket exhaust systems with modified airboxes and stock or replacement air filters. For use on models where individual air filters cannot be installed and airbox modifications improve overall engine performance. Expect a power increase of approximately 8 percent.. 4176
4 on hand
More Info/Options for Dynojet Stage 1 & 2 Jet Kit 4176
|
|
|
|
$81.99
Discount Dynojet Stage 1 Jet Kit 4182
Manufacturer: Dynojet
Dennis Kirk Part #: 171926
Dynojet Stage 1 Jet Kit: Manufacturer part # 4182 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 4182
8 on hand
More Info/Options for Dynojet Stage 1 Jet Kit 4182
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 418411
Manufacturer: Dynojet
Dennis Kirk Part #: 201625
Dynojet Power Commander III USB: Manufacturer part # 418411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. Made in the U.S.A.. NOTE: USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). INCLUDED ITEMS: One power commander. One USB cable. One power adapter. Two power commander decals. Two dynojet decals. Two velcro strips. One alcohol swab. One instruction sheet.. 418411
1 on hand
More Info/Options for Dynojet Power Commander III USB 418411
|
|
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 419411
Manufacturer: Dynojet
Dennis Kirk Part #: 201628
Dynojet Power Commander III USB: Manufacturer part # 419411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. . INCLUDED ITEMS: One power commander. One USB cable. One CD-ROM. One installation guide. One power adapter. Two power commander decals. Two dynojet decals. Two velcro strips. One alcohol swab. Two wire taps.. 419411
1 on hand
More Info/Options for Dynojet Power Commander III USB 419411
|
|
|
|
$332.99
Discount Dynojet California A.R.B. Approved Power Commander III USB-EX 419411EX
Manufacturer: Dynojet
Dennis Kirk Part #: 202344
Dynojet California A.R.B. Approved Power Commander III USB-EX: Manufacturer part # 419411EX - Provides virtually the same tuning functionality as the "race only" Power Commander III US. Compatible with Tuning Link software. Creates fuel mapping and custom maps. Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format. Will work with any exhaust system. Increases torque and horsepower. Included Items:. , 1. (1) Power commander. , 2. (1) USB cable. , 3. (1) Cd-Rom. , 4. (1) Installation Guide. , 5. (1) Power adapter. , 6. (2) Power commander decal. , 7. (2)Dynojet decal. , 8. (2) Velcro strip. , 9. (1) Alcohol swab.. 419411EX
1 on hand
More Info/Options for Dynojet California A.R.B. Approved Power Commander III USB-EX 419411EX
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 420411
Manufacturer: Dynojet
Dennis Kirk Part #: 201626
Dynojet Power Commander III USB: Manufacturer part # 420411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 420411
4 on hand
More Info/Options for Dynojet Power Commander III USB 420411
|
|
|
|
$332.99
Discount Dynojet California A.R.B. Approved Power Commander III USB-EX 420411EX
Manufacturer: Dynojet
Dennis Kirk Part #: 202338
Dynojet California A.R.B. Approved Power Commander III USB-EX: Manufacturer part # 420411EX - Provides virtually the same tuning functionality as the "race only" Power Commander III US. Compatible with Tuning Link software. Creates fuel mapping and custom maps. Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format. Will work with any exhaust system. Increases torque and horsepower. Included Items: , (1) Power Commander EX, (1) USB Cable, (1) CD-Rom, (1) Installation Guide, (1) Power Adapter, (2) Power Commander EX Decal, (2) Dynojet Decal, (2) Velcro Strip, (1) Alcohol Swab. 420411EX
1 on hand
More Info/Options for Dynojet California A.R.B. Approved Power Commander III USB-EX 420411EX
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 421411
Manufacturer: Dynojet
Dennis Kirk Part #: 201627
Dynojet Power Commander III USB: Manufacturer part # 421411 - Dynojet Research, Inc. is the world leader in the development and manufacturing of performance enhancement products and tools. Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock - Dynojet continuously maps new calibrations for each bike for downloading at their website (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied - no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. USB power programming module is necessary to provide voltage to your Power Commander when it is removed from the bike and attached to your PC (must be purchased separately; not required if module is installed on bike). Software is compatible with Windows 98se/ME/2000/XP - opens all maps with .djm extension. USB 9V Power Adapter is included, for optional adaptors Part No. 17-2278 (Dual-Volt) and Part No. 17-2279 (International Plug). Made in the U.S.A. .. 421411
1 on hand
More Info/Options for Dynojet Power Commander III USB 421411
|
|
|
|
|
|
$35.99
Discount Dynojet Stage 2 Jet Kit 4223
Manufacturer: Dynojet
Dennis Kirk Part #: 171928
Dynojet Stage 2 Jet Kit: Manufacturer part # 4223 - For motorcycles with stock or slightly modified engines that have well-designed stock or aftermarket exhaust systems with modified airboxes and stock or replacement air filters. For use on models where individual air filters cannot be installed and airbox modifications improve overall engine performance. Expect a power increase of approximately 8 percent.. 4223
1 on hand
More Info/Options for Dynojet Stage 2 Jet Kit 4223
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 423411
Manufacturer: Dynojet
Dennis Kirk Part #: 202361
Dynojet Power Commander III USB : Manufacturer part # 423411 - Connect the PCIII USB (Universal Serial Bus) to the computer and receive an instant and automatic connection to the Power Commander Control Center software. When doing engine modifications, installing a new exhaust system or changing an air filter to a fuel-injected snowmobile, precise information will be provided. Change the settings with three touch buttons on the faceplate if you do not own or have access to a computer. No wiring modifications are required as OEM-style wiring connectors and an improved harness protector are supplied. Easy to follow instructions and USB special cable and 9V battery power adapter are included. An expansion port for future add-on modules from Dynojet is featured. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. LI>Made in the U.S.A.. , , NOTE: Dynojet Research does NOT offer a supported Map Database for Snowmobile Power Commanders. It is recommended that this product only be used by advanced tuners. Power Commanders for snowmobile applications give you the ability to fine tune your fuel curve to coincide with your engine/exhaust setup. The Power Commander allows you increase or decrease the amount of fuel up to +/- 100 percent from stock fuel curve. We recommend using our Wide Band Commander (www.widebandcommander.com) to gather RPM, adjust the Power Commander accordingly to achieve the optimal setting for your snowmobile. The Power Commander is shipped from Dynojet with a "zero map" loaded into the unit. Installing the Power Commander in this form will NOT change the way your snowmobile runs. In order to achieve an increase in performance you will need to adjust the settings based on your Air/Fuel ratio data by trial and error , , Included Items: , 1. (1) Power Commander, 2. (1) USB Cable, 3. (1) CD-ROM, 4. (1) Installation Guide, 5. (1) Power Adapter, 6. (2) Power Commander Decals, 7. (2) Dynojet Decals, 8. (2) Velcro® Strips, 9. (1) Alcohol Swab, 9. (2) Zip Ties. 423411
2 on hand
More Info/Options for Dynojet Power Commander III USB 423411
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 424411
Manufacturer: Dynojet
Dennis Kirk Part #: 202212
Dynojet Power Commander III USB: Manufacturer part # 424411 - USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site(www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A.. Included Items: , (1) Power Commander, (1) USB Cable, (1) CD-Rom, (1) Installation Guide, (1) Power Adapter, (2) Power Commander Decals, (2) Dynojet Decals, (2) Velcro Strip, (1) Alcohol Swab, (1) Wire Tap. 424411
1 on hand
More Info/Options for Dynojet Power Commander III USB 424411
|
|
|
|
$332.99
Discount Dynojet Power Commander III USB 424411 202211
Manufacturer: Dynojet
Dennis Kirk Part #: 202211
Dynojet Power Commander III USB: Manufacturer part # 424411 - DennisKirk Part # 202211 - USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site(www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A.. Included Items: , (1) Power Commander, (1) USB Cable, (1) CD-Rom, (1) Installation Guide, (1) Power Adapter, (2) Power Commander Decals, (2) Dynojet Decals, (2) Velcro Strips. 424411
2 on hand
More Info/Options for Dynojet Power Commander III USB 424411 202211
|
|
|
|
$332.99
Discount Dynojet California A.R.B. Approved Power Commander III USB-EX 424411EX
Manufacturer: Dynojet
Dennis Kirk Part #: 202345
Dynojet California A.R.B. Approved Power Commander III USB-EX: Manufacturer part # 424411EX - Provides virtually the same tuning functionality as the "race only" Power Commander III US. Compatible with Tuning Link software. Creates fuel mapping and custom maps. Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format. Will work with any exhaust system. Increases torque and horsepower. Included Items: , (1) Power Commander EX, (1) USB Cable, (1) CD-Rom, (1) Installation Guide, (1) Power Adapter, (2) Power Commander EX Decals, (2) Dynojet Decals, (2) Velcro Strips. 424411EX
1 on hand
More Info/Options for Dynojet California A.R.B. Approved Power Commander III USB-EX 424411EX
|
|
|
|
$332.99
Discount Dynojet California A.R.B. Approved Power Commander III USB-EX 426411EX
Manufacturer: Dynojet
Dennis Kirk Part #: 202342
Dynojet California A.R.B. Approved Power Commander III USB-EX: Manufacturer part # 426411EX - Provides virtually the same tuning functionality as the "race only" Power Commander III US. Compatible with Tuning Link software. Creates fuel mapping and custom maps. Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format. Will work with any exhaust system. Increases torque and horsepower. Included Items. , 1. (1) Power Commander Ex. , 2. (1) USB Cable. , 3. (1) CD-Rom. , 4. (1) Installation Guide. , 5. (1) Power Adapter. , 6. (2) Power Commander EX Decal. , 7. (2) Dynojet Decal. , 8. (20 Velcro Strips. , 9. (1) Alcohol Swab. , 10. (1) Wire Tap.. 426411EX
| | |
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS