|
Drag Specialties One-Piece Seat w
|
|
 |
|
|
|
Drag Specialties One-Piece Seat w
|
This site contains about 139,777 documents.
|
|
View by:
Title
|
Brand
|
Category
|
Type
|
Price
|
Part Number
|
|
Page:
1
100
200
300
400
500
600
700
850
860
870
880
890
900
910
920
930
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
970
980
990
1,000
1,010
1,020
1,030
1,040
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
3,000
4,000
4,660
|
|
|
|
|
$357.95
Cheap Drag Specialties One-Piece 2 in. Extended Gas Tank with Dual Screw-In Caps 11619BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18715
Drag Specialties One-Piece 2 in. Extended Gas Tank with Dual Screw-In Caps: Manufacturer part # 11619BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson. Two things go hand in hand at Drag: quality and quantity. Smooth-top tank features 2 in. stretch over stock length. Fully functional. No dummy extensions. Screw-in gas caps sold separately (use 82-E96 style). Requires custom gauge mounting. Accept late-style petcock (22mm). No fuel gauge provision. Comes complete with all necessary mounting hardware. 4.2 gallon capacity. , NOTE: , Seat nose may require modification, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 11619BX46
1 on hand
More Info/Options for Drag Specialties One-Piece 2 in. Extended Gas Tank with Dual Screw-In Caps 11619BX46
|
|
|
|
CLEARANCE!
Was: $437.95
Now: $249.90
Cheap Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill 011808BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18895
Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill: Manufacturer part # 011808BX46 - Standard-length or 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Available in smooth-top design that eliminate the dash completely (requires custom mounting of gauges, ignition switch and dash lights) and dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single Screw-in cap tank requires the use of 82-E96 gas cap (sold separately), , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011808BX46
1 on hand
More Info/Options for Drag Specialties One-Piece 2 in. Extended Smooth Top w/Center Fill 011808BX46
|
|
|
|
|
|
$352.95
Cheap Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps 011660BX40
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18532
Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps: Manufacturer part # 011660BX40 - No dummy extension, 4.2 gallon, steel tank if fully functional. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth top tank eliminates the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L x 16 in. W. Dual screw-in caps are not included and must be purchased separately (use 82-E96 style caps). All necessary hardware included. , NOTE: 96-99 models require the use of pre-96 petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011660BX40
1 on hand
More Info/Options for Drag Specialties One-Piece 2 in. Extended Smooth-Top Tank with Dual Screw-In Caps 011660BX40
|
|
|
|
$324.95
Cheap Drag Specialties One-Piece Classic Stitch Seat w/Studs 0804-0279
Manufacturer: Drag Specialties
Dennis Kirk Part #: 454839
Drag Specialties One-Piece Classic Stitch Seat w/Studs : Manufacturer part # 0804-0279 - Select models feature solar-reflective leather in the seating area to stay cool even in direct sunlight, and automotive-grade vinyl on the sides (as noted); all others feature automotive-grade vinyl in seating area and on sides. Look like a front solo-style with a separate pillion pad; however, they are connected and use a common seat base. Custom injection-molded polyurethane seat foam for comfort, with durable nylon thread. Pillow style seats feature high-grade, leather-like vinyl cover and an additional 1" of memory foam in the seating area for added comfort. Precision thermoformed ABS plastic seat base with rubber bumpers is carpeted to protect painted surfaces. Mount using OEM rear mounting bracket. Fit with all Drag and most H-D sissy bars. Made in the U.S.A.. , NOTE: Solar-reflective leather in seating area., , Dimensions: , Overall Length: 27 in., Drivers Seat: Length: 15-1/4 in., Width: 12 in., Backrest Height: 3-1/2 in., Passenger Seat: Length: 11-3/4 in., Width: 6-3/4 in.. 0804-0279
1 on hand
More Info/Options for Drag Specialties One-Piece Classic Stitch Seat w/Studs 0804-0279
|
|
|
|
$314.95
Cheap Drag Specialties One-Piece Classic Stitch Solo-Style Seat 0804-0278
Manufacturer: Drag Specialties
Dennis Kirk Part #: 454838
Drag Specialties One-Piece Classic Stitch Solo-Style Seat: Manufacturer part # 0804-0278 - Select models feature solar-reflective leather in the seating area to stay cool even in direct sunlight, and automotive-grade vinyl on the sides (as noted); all others feature automotive-grade vinyl in seating area and on sides. Look like a front solo-style with a separate pillion pad; however, they are connected and use a common seat base. Custom injection-molded polyurethane seat foam for comfort, with durable nylon thread. Pillow style seats feature high-grade, leather-like vinyl cover and an additional 1" of memory foam in the seating area for added comfort. Precision thermoformed ABS plastic seat base with rubber bumpers is carpeted to protect painted surfaces. Mount using OEM rear mounting bracket. Fit with all Drag and most H-D sissy bars. Made in the U.S.A.. , NOTE: Solar-reflective leather in seating area., , Dimensions: , Overall Length: 26-3/4 in., Drivers Seat: Length: 15 in., Width: 12 in., Backrest Height: 3-1/2 in., Passenger Seat: Length: 11-3/4 in., Width: 7 in.. 0804-0278
1 on hand
More Info/Options for Drag Specialties One-Piece Classic Stitch Solo-Style Seat 0804-0278
|
|
|
|
CLEARANCE!
Was: $353.95
Now: $249.90
Cheap Drag Specialties One-Piece Dash Style Tank 011800BX40
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18864
Drag Specialties One-Piece Dash Style Tank: Manufacturer part # 011800BX40 - Dual screw in caps. Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank requires the use of 82-E96 gas caps (sold separately), , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011800BX40
2 on hand
More Info/Options for Drag Specialties One-Piece Dash Style Tank 011800BX40
|
|
|
|
$374.95
Cheap Drag Specialties One-Piece Dash Style Tank 011860BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18871
Drag Specialties One-Piece Dash Style Tank: Manufacturer part # 011860BX46 - Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank require the use of 82-E96 gas caps (sold separately), , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011860BX46
1 on hand
More Info/Options for Drag Specialties One-Piece Dash Style Tank 011860BX46
|
|
|
|
$369.95
Cheap Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011813BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18865
Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011813BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson. Two things go hand in hand at Drag: quality and quantity. Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single screw-in cap tank require the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011813BX46
1 on hand
More Info/Options for Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011813BX46
|
|
|
|
$374.95
Cheap Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011861BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18874
Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011861BX46 - Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges, , NOTE: For Softail models 01-06 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011861BX46
1 on hand
More Info/Options for Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung 011861BX46
|
|
|
|
$439.95
Cheap Drag Specialties One-Piece Extended Gas Tank 011737BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18520
Drag Specialties One-Piece Extended Gas Tank : Manufacturer part # 011737BX46 - Smooth-top tank features 2 in. stretch over stock length. Fully functional. No dummy extensions. Single locking Aero cap included. Requires custom gauge mounting. Accept late-style petcock (22mm). No fuel gauge provision. Comes complete with all necessary mounting hardware. 4.2 gallon capacity. , , NOTE: Seat nose may require modification, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011737BX46
1 on hand
More Info/Options for Drag Specialties One-Piece Extended Gas Tank 011737BX46
|
|
|
|
$449.95
Cheap Drag Specialties One-Piece Extended Smooth-Top Tank 011735BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18089
Drag Specialties One-Piece Extended Smooth-Top Tank : Manufacturer part # 011735BX46 - Tanks have no dummy extensions, 4.2 gallon. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth top tank eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L x 16 in. W. Aero locking caps are included. All necessary hardware included. NOTE: Seat nose may require modification. WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed before being painted to eliminate potential problems.. 011735BX46
1 on hand
More Info/Options for Drag Specialties One-Piece Extended Smooth-Top Tank 011735BX46
|
|
|
|
$324.95
Cheap Drag Specialties One-Piece Pillow-Style Seat w/Studs 0804-0267
Manufacturer: Drag Specialties
Dennis Kirk Part #: 454827
Drag Specialties One-Piece Pillow-Style Seat w/Studs : Manufacturer part # 0804-0267 - Select models feature solar-reflective leather in the seating area to stay cool even in direct sunlight, and automotive-grade vinyl on the sides (as noted); all others feature automotive-grade vinyl in seating area and on sides. Look like a front solo-style with a separate pillion pad; however, they are connected and use a common seat base. Custom injection-molded polyurethane seat foam for comfort, with durable nylon thread. Pillow style seats feature high-grade, leather-like vinyl cover and an additional 1" of memory foam in the seating area for added comfort. Precision thermoformed ABS plastic seat base with rubber bumpers is carpeted to protect painted surfaces. Mount using OEM rear mounting bracket. Fit with all Drag and most H-D sissy bars. Made in the U.S.A.. , Dimensions: , Overall Length: 26-1/2 in., Drivers Seat: Length: 15 in., Width: 12 in., Backrest Height: 5 in., Passenger Seat: Length: 11-1/2 in., Width: 7 in.. 0804-0267
1 on hand
More Info/Options for Drag Specialties One-Piece Pillow-Style Seat w/Studs 0804-0267
|
|
|
| |
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS