Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Cobra Dragster Exhaust Systems 1623

$371.95 Cheap Cobra Dragster Exhaust Systems 1623 Manufacturer: Cobra Dennis Kirk Part #: 4400258 Cobra Dragster Exhaust Systems: Manufacturer part # 1623 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A.. INCLUDED ITEMS: One front exhaust with heatshield. One rear exhaust with heatshield. One exhaust bracket. Four HS-24 clamps. Two HS-28 clamps. Four 5/16 in.-18 x 5/8 in. hex bolts. Two 1/4 in.-20 x 3/8 in. button screws. Two billet muffler tips. One instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1623 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 1623

$371.95 Cheap Cobra Dragster Exhaust Systems 1625 Manufacturer: Cobra Dennis Kirk Part #: 4400259 Cobra Dragster Exhaust Systems: Manufacturer part # 1625 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , Included Items: , (1) Front Exhaust Assembly w/Heatshield, (1) Rear Exhaust Assembly w/Heatshield, (1) Exhaust Bracket, (1) Regulator Bracket, (4) Clamps (HS-24), (2) Clamps (HS-28), (2) Billet Exhaust Tips, (1) Bolt, Hex 3/8 x 1.00, (4) Bolt, Hex 5/16-18 x 5/8, (2) Screw, Button 1/4-20 x 3/8, (1) M10 x 20mm Bolt, (1) M10 Flat Washer, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1625 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 1625

$371.95 Cheap Cobra Dragster Exhaust Systems 1626 Manufacturer: Cobra Dennis Kirk Part #: 4400260 Cobra Dragster Exhaust Systems: Manufacturer part # 1626 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , Included Items: , (1) Front Exhaust Assembly w/Heatshield, (1) Rear Exhaust Assembly w/Heatshield, (1) Exhaust Bracket, (1) Regulator Bracket, (4) Clamps (HS-24), (2) Clamps (HS-28), (2) Billet Exhaust Tips, (1) Bolt, Hex 3/8 x 1.00, (4) Bolt, Hex 5/16-18 x 5/8, (2) Screw, Button 1/4-20 x 3/8, (1) M10 x 20mm Bolt, (1) M10 Flat Washer, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1626 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 1626

$371.95 Cheap Cobra Dragster Exhaust Systems 1630 Manufacturer: Cobra Dennis Kirk Part #: 4400262 Cobra Dragster Exhaust Systems: Manufacturer part # 1630 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1630 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 1630

$371.95 Cheap Cobra Dragster Exhaust Systems 2617 Manufacturer: Cobra Dennis Kirk Part #: 4400265 Cobra Dragster Exhaust Systems: Manufacturer part # 2617 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A.. INCLUDED ITEMS: (1) front exhaust assembly with heatshield. (1) rear exhaust asseembly with heatshield. (1) exhaust mounting bracket. (1) brake reserviour relocator bracket. (6) clamps. (1) 8 in. black ziptie. (2) billet muffler tips. (4) 5/16 in. x 5/8 in. flange bolts. (2) 1/4 in. x 3/8 in. button screws. (2) M8 x 16mm flange bolts. (1) M6 x 20mm flange bolt. (1) M6 locking nut. (1) instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 2617 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 2617

$371.95 Cheap Cobra Dragster Exhaust Systems 2621 Manufacturer: Cobra Dennis Kirk Part #: 4400266 Cobra Dragster Exhaust Systems: Manufacturer part # 2621 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 2621 1 on hand More Info/Options for Cobra Dragster Exhaust Systems 2621

$371.95 Cheap Cobra Dragster Exhaust Systems 2627 Manufacturer: Cobra Dennis Kirk Part #: 4403032 Cobra Dragster Exhaust Systems: Manufacturer part # 2627 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: , Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. , , Included Items: . , 1. (1) Front headpipe with heatshield. , 2. (1) Rear headpipe with headshield. , 3. (1) Muffler assembly. , 4. (1) exhaust-mounting bracket. , 5. (1) Exhaust flanges. , 6. (1) (5) Hose clamps HS-24. , 7. (1) Hose clamps HS-28. , 8. (2) Clamp, 27-61MSC. , 9. (2) Bolt, hex 5/16-18 x 5/8. , 10. (2) Buttonhead screw 1/4-20 x 3/8. , 11. (2) Billet muffler tips. 2627 1 on hand More Info/Options for Cobra Dragster Exhaust Systems 2627

$371.95 Cheap Cobra Dragster Exhaust Systems 3616 Manufacturer: Cobra Dennis Kirk Part #: 4400274 Cobra Dragster Exhaust Systems: Manufacturer part # 3616 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3616 1 on hand More Info/Options for Cobra Dragster Exhaust Systems 3616

$371.95 Cheap Cobra Dragster Exhaust Systems 3621 Manufacturer: Cobra Dennis Kirk Part #: 4400384 Cobra Dragster Exhaust Systems: Manufacturer part # 3621 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3621 1 on hand More Info/Options for Cobra Dragster Exhaust Systems 3621

$378.95 Cheap Cobra Dragster Exhaust Systems 3622 Manufacturer: Cobra Dennis Kirk Part #: 4402768 Cobra Dragster Exhaust Systems: Manufacturer part # 3622 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3622 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 3622

$371.95 Cheap Cobra Dragster Exhaust Systems 4618 Manufacturer: Cobra Dennis Kirk Part #: 4400387 Cobra Dragster Exhaust Systems: Manufacturer part # 4618 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A.. INCLUDED ITEMS: (1) front exhaust with heatshield. (1) rear exhaust with heatshield. (1) exhaust bracket. (4) HS-24 clamps. (2) HS-28 clamps. (4) 5/16 in.-18 x 5/8 in. hex bolts. (2) 1/4 in.-20 x 3/8 in. button screws. (2) billet muffler tips. (1) instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4618 2 on hand More Info/Options for Cobra Dragster Exhaust Systems 4618

$371.95 Cheap Cobra Dragster Exhaust Systems 4619 Manufacturer: Cobra Dennis Kirk Part #: 4400279 Cobra Dragster Exhaust Systems: Manufacturer part # 4619 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4619 2 on hand More Info/Options for Cobra Dragster Exhaust Systems 4619

$371.95 Cheap Cobra Dragster Exhaust Systems 4622 Manufacturer: Cobra Dennis Kirk Part #: 4400280 Cobra Dragster Exhaust Systems: Manufacturer part # 4622 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4622 Expected Soon More Info/Options for Cobra Dragster Exhaust Systems 4622

$371.95 Cheap Cobra Dragsters 3620 Manufacturer: Cobra Dennis Kirk Part #: 4400546 Cobra Dragsters: Manufacturer part # 3620 - Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance. Full-length, 2.5" heat shields with a 222 wraparound for a non-blueing appearance. Capped with machined and chromed billet tips. Removable performance cores. Simple installation. Made in the U.S.A., , Included Items: , (1) Front exhaust w/heatshield assembly, (1) Rear exhaust with heatshield assembly, (1) Exhaust bracket, (6) Hose clamps, (4) Bolts, hex 5/16-18 x .63, (2) Screw, button 1/4-20 x .38, (2) Billet muffler tips, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3620 Expected Soon More Info/Options for Cobra Dragsters 3620

$422.99 Cheap Cobra Dragsters 6810 Manufacturer: Cobra Dennis Kirk Part #: 4400234 Cobra Dragsters: Manufacturer part # 6810 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a non-blueing appearance. Machined and chromed billet tips with removable performance cores. Fast and simple installation. Made in the U.S.A.. , INCLUDED ITEMS: , One front exhaust assembly with heatshield, One rear exhaust assembly with heatshield, One exhaust bracket, Six hose clamps, Four 5/16 in.-18 x 5/8 in. hex bolts, Two 3/8 in. x 1.0 in. hex bolts, Two 1/4 in.-20 x 3/8 in. button screws, One 3/8 in.-16 x 2.50 SHC screw, One 1/2 in.-20 x 3.00 SHC screw, Two spacers, Two billet muffler tips, One instruction sheet, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speeds Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6810 1 on hand More Info/Options for Cobra Dragsters 6810

$422.99 Cheap Cobra Dragsters 6811 Manufacturer: Cobra Dennis Kirk Part #: 4401441 Cobra Dragsters: Manufacturer part # 6811 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a non-blueing appearance. Machined and chromed billet tips with removable performance cores. Includes Dual O2 sensor ports. Fast and simple installation. Made in the U.S.A.. , Included Items: , (1) Front Exhaust Assembly w/Heatshield, (1) Rear Exhaust Assembly w/Heatshield, (1) Exhaust Bracket, (4) Hose Clamps (HS24), (2) Hose Clamps (HS28), (4) Bolts, Hex 5/16-18 x 5/8 in., (2) Bolts, Hex 3/8 x 1 in., (2) Screw,Button 1/4-20 x 3/8 in., (1) Screw SHC 3/8-16 x 2.5 in., (1) Screw SHC 1/2-20 x 3 in., (1) Short Spacer, (1) Long Spacer, (2) Billet Muffler Tips, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6811 1 on hand More Info/Options for Cobra Dragsters 6811

$422.99 Cheap Cobra Dragsters 6815 Manufacturer: Cobra Dennis Kirk Part #: 4400233 Cobra Dragsters: Manufacturer part # 6815 - Same as traditional drag pipes but with a little more updating. Full-length, 2.5 in. heat shields with a 222 degree wraparound complete a non-blueing appearance. Machined and chromed billet tips with removable performance cores. Fast and simple installation. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speeds Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6815 1 on hand More Info/Options for Cobra Dragsters 6815

$415.99 Cheap Cobra Dragsters 6816 Manufacturer: Cobra Dennis Kirk Part #: 4400232 Cobra Dragsters: Manufacturer part # 6816 - Same as