Cobra 2, Cobra 4, Cobra 4 in, 2 in, Cobra 3, Cobra 24 in, Cobra 3 in

This site contains about 139,777 documents.

View by:

Page: 1 100 200 300 490 500 510 520 530 540 550 560 570 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 610 620 630 640 650 660 670 680 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 2,000 3,000 4,000 4,660

$315.95 Cheap Cobra 2-into-2 Slash-Cut Tips Exhaust System 2163SC
Manufacturer: Cobra
Dennis Kirk Part #: 444805
Cobra 2-into-2 Slash-Cut Tips Exhaust System: Manufacturer part # 2163SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. All muffled systems feature 2 1/2 in. staggered duals; all systems exit on the right-hand side of the motorcycle. Baffles are nonremovable. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. , , Included Items: , (1) Top exhaust pipe, (1) Bottom muffler, (1) Heat shield, (1) T-Bolt Clamp, (2) Hose clamps. , , NOTE: Utilizes stock front headpipe and heat shield for all systems; includes heat shields for rear headpipe on Slash-Cut systems , , NOTE: This part will not fit 2004-05 California versions of this motorcycle, , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel Section.. Exhaust discoloration (bluing) is caused by engine conditions such a cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chemicals and Lubes section for products to help remove or prevent exhaust discoloration.. 2163SC
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Cut Tips Exhaust System 2163SC

$465.95 Cheap Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System 2817
Manufacturer: Cobra
Dennis Kirk Part #: 449842
Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System : Manufacturer part # 2817 - Addition of PowerPort headpipe increases overall performance. Two-inch full-length chrome plated steel heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Baffles are removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2817
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System 2817

$465.95 Cheap Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System 2821
Manufacturer: Cobra
Dennis Kirk Part #: 449843
Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System : Manufacturer part # 2821 - Addition of PowerPort headpipe increases overall performance. Two-inch chrome plated steel full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Baffles are removable. Made in U.S.A.. , , Included Items:, (1) Front headpipe with heatshield, (10 Rear headpipe with heatshield, (1) Muffler assembly, (1) Exhaust bracket, (2) Exhaust flanges, (4) Hose clamps, (2) Clamp, 27-61MSC, (2) Bolt, hex 516-.63, (2) Screw, button 1/4-20 x .38, (2) Bolts, allen M10x30mm, (2) Nuts, M10 nylock, (2) Billet muffler tips, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2821
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System 2821

$465.95 Cheap Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System 2823
Manufacturer: Cobra
Dennis Kirk Part #: 4400269
Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System: Manufacturer part # 2823 - Addition of PowerPort headpipe increases overall performance. Two-inch chrome plated steel, full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Baffles are removable. INCLUDED ITEMS: , Two exhaust with heatshields. One muffler assembly. One exhaust bracket. Two exhaust flanges. Seven hose clamps. Two clamps. Two 5/16 in.-18 x 5/8 in. hex bolts. Two 1/4 in.-20 x 5/8 in. button screws. Two billet muffler tips. One instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2823
1 on hand

More Info/Options for Cobra 2-into-2 Slash-Down Hot Rod Speedster Exhaust System 2823

$378.95 Cheap Cobra 2-into-2 Speedster Streetrod Exhaust System 1713
Manufacturer: Cobra
Dennis Kirk Part #: 449830
Cobra 2-into-2 Speedster Streetrod Exhaust System : Manufacturer part # 1713 - Two-inch chrome plated steel full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Power increase with improved rideability. Features removable baffles. Easy installation with all mounting hardware included. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1713
1 on hand

More Info/Options for Cobra 2-into-2 Speedster Streetrod Exhaust System 1713

$378.95 Cheap Cobra 2-into-2 Speedster Streetrod Exhaust System 1724
Manufacturer: Cobra
Dennis Kirk Part #: 449831
Cobra 2-into-2 Speedster Streetrod Exhaust System: Manufacturer part # 1724 - Chrome plated steel, two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Power increase with improved rideability. Features removable baffles. Easy installation with all mounting hardware included. Made in the U.S.A.. , , Included items: , (2) Front and rear exhaust headpipe, (2) Front and rear exhaust heatshield, (1) Muffler assembly, (1) Exhaust Bracket, (4) Clamps, heatshields, (2) Clamps, headpipes, (2) Clamp, muffler, (2) Bolt, hex 5/16-18 x .63, (2) Screw, Button 1/4-20 x .38, (2) Billet muffler tips, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1724
Expected Soon

More Info/Options for Cobra 2-into-2 Speedster Streetrod Exhaust System 1724

$378.95 Cheap Cobra 2-into-2 Speedster Streetrod Slash Down Exhaust System 1924
Manufacturer: Cobra
Dennis Kirk Part #: 449839
Cobra 2-into-2 Speedster Streetrod Slash Down Exhaust System : Manufacturer part # 1924 - Chrome plated steel, two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Power increase with improved rideability. Features removable baffles. Easy installation with all mounting hardware included. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1924
Expected Soon

More Info/Options for Cobra 2-into-2 Speedster Streetrod Slash Down Exhaust System 1924

$378.95 Cheap Cobra 2-into-2 Speedster Streetrod Slash-Down Exhaust System 3917
Manufacturer: Cobra
Dennis Kirk Part #: 4400221
Cobra 2-into-2 Speedster Streetrod Slash-Down Exhaust System : Manufacturer part # 3917 - Chrome plated steel, two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Power increase with improved rideability. Features removable baffles. Easy installation with all mounting hardware included. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3917
4 on hand

More Info/Options for Cobra 2-into-2 Speedster Streetrod Slash-Down Exhaust System 3917

$378.95 Cheap Cobra 2-into-2 Speedster Streetrod Slash-Down Exhaust System 1913
Manufacturer: Cobra
Dennis Kirk Part #: 449838
Cobra 2-into-2 Speedster Streetrod Slash-Down Exhaust System: Manufacturer part # 1913 - Chrome plated steel, two-inch full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Power increase with improved rideability. Features removable baffles. Easy installation with all mounting hardware included. Made in the U.S.A.. , , Included Items:, (2) Front and rear exhaust headpipes, (2) Front and rear exhaust heatshields, (1) Muffler assembly, (1) Exhaust bracket, (4) Clamps, heatshields, (2) Clamps, headpipes, (2) clamps, muffler, (2) Bolt, Hex 5/16-18 x 63, (2) Screw, button 1/4-20 x .38, (2) Billet muffler tips, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 1913
1 on hand

More Info/Options for Cobra 2-into-2 Speedster Streetrod Slash-Down Exhaust System 1913

$378.95 Cheap Cobra 2-into-2 Speedster Streetrods Exhaust System 3717
Manufacturer: Cobra
Dennis Kirk Part #: 4400220
Cobra 2-into-2 Speedster Streetrods Exhaust System : Manufacturer part # 3717 - Two-inch chrome plated steel, full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Power increase with improved rideability. Features removable baffles. Easy installation with all mounting hardware included. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 3717
Expected Soon

More Info/Options for Cobra 2-into-2 Speedster Streetrods Exhaust System 3717

$8.99 Cheap Cobra 2.05 in. T-Bolt Exhaust Clamp 952958P
Manufacturer: Cobra
Dennis Kirk Part #: 442696
Cobra 2.05 in. T-Bolt Exhaust Clamp: Manufacturer part # 952958P - Stainless steel fights rust and heat. Available in nine sizes to fit almost any exhaust system. Sold each.. 952958P
4 on hand

More Info/Options for Cobra 2.05 in. T-Bolt Exhaust Clamp 952958P

$23.99 Cheap Cobra 24 in Replacement Baffle for Longs 9017
Manufacturer: Cobra
Dennis Kirk Part #: 4402775
Cobra 24 in Replacement Baffle for Longs: Manufacturer part # 9017 - Replacement/optional baffles for Cobra Hot Rod Speedster exhausts and Speedster Streetrod exhausts.. 9017
Expected Soon

More Info/Options for Cobra 24 in Replacement Baffle for Longs 9017

$27.99 Cheap Cobra 24 in. Optional Quiet Core Baffle for Longs 9017Q
Manufacturer: Cobra
Dennis Kirk Part #: 4402776
Cobra 24 in. Optional Quiet Core Baffle for Longs: Manufacturer part # 9017Q - Replacemen/optional baffles for Cobra Hot Rod Speedster exhausts.. 9017Q
Expected Soon

More Info/Options for Cobra 24 in. Optional Quiet Core Baffle for Longs 9017Q

$59.00 Cheap Cobra 3 in. Sparky Spark Arrester 9196
Manufacturer: Cobra
Dennis Kirk Part #: 44779
Cobra 3 in. Sparky Spark Arrester: Manufacturer part # 9196 - The most free flowing spark arrestor available. Lightweight aluminum construction. 3 in. universal fit for round mufflers. U.S. Forest Service approved. No power loss. Simple maintenance. Quick bolt-on fit. Sold each.. 9196
2 on hand

More Info/Options for Cobra 3 in. Sparky Spark Arrester 9196

$8.99 Cheap Cobra 3.50 in. T-Bolt Exhaust Clamp 952975P
Manufacturer: Cobra
Dennis Kirk Part #: 442697
Cobra 3.50 in. T-Bolt Exhaust Clamp: Manufacturer part # 952975P - Stainless steel fights rust and heat. Available in nine sizes to fit almost any exhaust system. Sold each.. 952975P