|
|
$520.95
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400458
Dennis Kirk Part #: 4400458
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400458: Manufacturer part # SH6SO2HT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH6SO2HT
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400458
|
|
|
|
$586.95
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400461
Dennis Kirk Part #: 4400461
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400461: Manufacturer part # SH6SO8HTT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH6SO8HTT
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4400461
|
|
|
|
$610.99
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401245
Dennis Kirk Part #: 4401245
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401245: Manufacturer part # SH6SO2LHT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH6SO2LHT
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401245
|
|
|
|
$1132.99
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401419
Dennis Kirk Part #: 4401419
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401419: Manufacturer part # SD10SO2THT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SD10SO2THT
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401419
|
|
|
|
$432.99
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401426
Dennis Kirk Part #: 4401426
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401426: Manufacturer part # SSK6S04HTT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SSK6S04HTT
1 on Hand
More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve 4401426
|
|
|
|
$634.99
Akrapovic Street Legal Line SP Series Oval Slip-On Muffler With Titanium Muffler Sleeve 4400423
Dennis Kirk Part #: 4400423
Akrapovic Street Legal Line SP Series Oval Slip-On Muffler With Titanium Muffler Sleeve 4400423: Manufacturer part # SY10SO3HT - Quality systems at an affordable price. Constructed of high-quality stainless steel. Street legal--conform to the conditions of the EU noise regulations through use of noise-damping inserts. Excellent combination of quality and performance at an affordable price. Weight savings over stock system. Improves the performance of your engine. Visually appealing. High position of brand name among competing manufacturers. NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SY10SO3HT
1 on Hand
More Info/Options for Akrapovic Street Legal Line SP Series Oval Slip-On Muffler With Titanium Muffler Sleeve 4400423
|
|
|
|
$979.99
Akrapovic Street Legal Line Titanium Slip-On With Carbon Fiber Muffler 4400424
Dennis Kirk Part #: 4400424
Akrapovic Street Legal Line Titanium Slip-On With Carbon Fiber Muffler 4400424: Manufacturer part # SY10SO6HDTC - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system. , , NOTE: This is a general picture of this exhaust the actual product may vary for your motorcycle Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SY10SO6HDTC
1 on Hand
More Info/Options for Akrapovic Street Legal Line Titanium Slip-On With Carbon Fiber Muffler 4400424
|
|
|
|
$480.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400364
Dennis Kirk Part #: 4400364
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400364: Manufacturer part # SH6SO2C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH6SO2C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400364
|
|
|
|
$545.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400365
Dennis Kirk Part #: 4400365
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400365: Manufacturer part # SH6SO5C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH6SO5C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400365
|
|
|
|
$633.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400366
Dennis Kirk Part #: 4400366
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400366: Manufacturer part # SH10SO3TTC - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH10SO3TTC
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400366
|
|
|
|
$502.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400368
Dennis Kirk Part #: 4400368
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400368: Manufacturer part # SK10SO2C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SK10SO2C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400368
|
|
|
|
$509.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400369
Dennis Kirk Part #: 4400369
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400369: Manufacturer part # SK6SO2C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SK6SO2C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400369
|
|
|
|
$509.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400373
Dennis Kirk Part #: 4400373
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400373: Manufacturer part # SY6SO3C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SY6SO3C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400373
|
|
|
|
$598.99
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400396
Dennis Kirk Part #: 4400396
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400396: Manufacturer part # SB12SO1C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SB12SO1C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400396
|
|
|
|
$553.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400412
Dennis Kirk Part #: 4400412
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400412: Manufacturer part # SS10SO2TC - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS10SO2TC
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400412
|
|
|
|
$591.99
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400440
Dennis Kirk Part #: 4400440
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400440: Manufacturer part # SS10SO2C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS10SO2C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400440
|
|
|
|
$494.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400442
Dennis Kirk Part #: 4400442
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400442: Manufacturer part # SS6SO1C - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS6SO1C
1 on Hand
More Info/Options for Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400442
|
|
|
|
$553.95
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400450
Dennis Kirk Part #: 4400450
Akrapovic Titanium Slip-Ons With Carbon Fiber Mufflers 4400450: Manufacturer part # SH6SO8TC - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH6SO8TC
1 on | |
