BUB 2 into 2 Exhaust p4402490, BUB 2 into 2 Exhaust p4402490 4402545

This site contains about 139,777 documents.

View by:

Page: 1 100 200 300 410 420 430 440 450 460 470 480 490 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 530 540 550 560 570 580 590 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 2,000 3,000 4,000 4,660

$37.99 Cheap Brite-Lites Strip Accent Light Kit BLASLEDY
Manufacturer: Brite-Lites
Dennis Kirk Part #: 214122
Brite-Lites Strip Accent Light Kit: Manufacturer part # BLASLEDY - The all new 36 inch long Flexible Accent Strip LED light Kit utilizes 40 Hi-output wide dispersion flat LEDs molded into a flexible plastic strip to give more light and maximum flexibility for installation. 3M brand adhesive allows the LED Strip to be mounted almost anywhere. Work on any 12 volt charging system- no battery needed. Switch not included.. BLASLEDY
Expected Soon

More Info/Options for Brite-Lites Strip Accent Light Kit BLASLEDY

$750.99 Cheap BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540
Manufacturer: BUB
Dennis Kirk Part #: 4402541
BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) 2-1 Header. , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Collector heat shield. , 5. (1) Mount bracket. , 6. (1) Saddle bracket. , 7. (1) Muffler clamp. , 8. (6) Heat shield clamp. , 9. (1) Header clamp. , 10. (1) Collector clamp. , 11. (2) 5/16" lock nuts. , 12. (3) 5/16"-18 x 3 1/4" allen bolt. , 13. (1) 5/16"-18 x 3/4" allen bolt. , 14. (3) 5/16" 3/4" hex bolt. , 15. (9) 5/16" flat washers. , 16. (1) "L" bracket tab. , 17. (2) Transmission spacer. , 18. (1) Rnd. Mounting BKT. spacer. , 19. (1) Saddle bracket gasket. , 20. (1) Instruction sheet. p4402540
1 on hand

More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540

$740.99 Cheap BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402540
Manufacturer: BUB
Dennis Kirk Part #: 4402540
BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402540 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) 2-1 header. , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Collector heat shield. , 5. (1) 2-1 muffler. , 6. (1) Mounting bracket. , 7. (1) "L" tab bracket. , 8. (1) Saddle bracket. , 9. (1) Saddle bracket gasket , 10. (1) Muffler clamp. , 11. (7) Heat shield clamp. , 12. (1) Collector heat shield clamp. , 13. (1) Header clamp. , 14. (2) 5/16" lock nuts. , 15. (3) 5/16" x 3/4" hex bolts. , 16. (5) 5/16" flat washers. , 17. (5) 3/8" flat washers. , 18. (2) 3/8"x3/4" hex bolt. , 19. (3) 3/8"x1 1/4" hex bolts. , 20. (3) Spacers. , 21. (1) Black zip-tie. , 22. (1) Instruction sheet. p4402540
1 on hand

More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402540

$750.99 Cheap BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402542
Manufacturer: BUB
Dennis Kirk Part #: 4402542
BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402542 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) 2-1 header. , 2. (1) Front head shield. , 3. (1) Rear heat shield. , 4. (1) Collector head shield. , 5. (1) Mount bracket. , 6. (1) 2-1 saddle bracket. , 7. (1) L-bracket. , 8. (1) Muffler clamp. , 9. (1) Collector head shield clamp. , 10. (7) Heat shield clamps. , 11. (2) 5/16" lock nut. , 12. (3) 5/16"-18 x 3 1/4" allen bolt. , 13. (1) 5/16"-18x 7/8" allen bolt. , 14. (1) 1/4"-20x 1 1/4" allen bolt. , 15. (1) 5/16"-18 x 3/4" hex bolt. , 16. (3) 5/16"-18 x 3/4" hex bolt. , 17. (1) 1/4" flat washer. , 18. (9) 5/16" Flat washers. , 19. (2) Transmission spacer. , 20. (1) Saddle bracket gasket. , 21. (1) Instruction sheet. p4402540
2 on hand

More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402542

$740.99 Cheap BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402543
Manufacturer: BUB
Dennis Kirk Part #: 4402543
BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402543 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE:, There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , Will not fit with forward controls. , , Included Items:. , 1. (1) BUB 7 2-1 header. , 2. (1) 2-1 Front heat shield. , 3. (1) 2-1 Rear heat shield. , 4. (1) 2-1 Collector heat shield. , 5. (1) 2-1 Muffler. , 6. (1) 2-1 Muffler clamp. , 7. (6) Heat shield clamps. , 8. (1) Collector heat shield clamps. , 9. (1) Header clamp. , 10. (1) "L" bracket. , 11. (1) Mounting bracket. , 12. (1) Saddle bracket. , 13. (1) Saddle bracket gasket. , 14. (3) 5/16-18x3/4" bolt. , 15. (2) 5/16-18 lock nuts. , 16. (5) 5/16" flat washers. , 17. (1) Instruction sheet. p4402540
1 on hand

More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402543

$740.99 Cheap BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402544
Manufacturer: BUB
Dennis Kirk Part #: 4402544
BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402544 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) BUB 7 2-1 header , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Collector heat shield. , 5. (1) Muffler 2-1. , 6. (1) Saddle mount bracket , 7. (1) Slide bracket. , 8. (1) Muffler clamp. , 9. (1) (6) Heat shield clamp. , 10. (1) Collector heat shield clamp. , 11. (4) 5/16-18 x 3/4" hex bolt. , 12. (2) 5/16-18 lock nut. , 13. (6) 5/16" flat washers. , 14. (1) Saddle bracket gasket. , 15. (1) Instruction sheet. p4402540
1 on hand

More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402544

$769.99 Cheap BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489
Manufacturer: BUB
Dennis Kirk Part #: 4402489
BUB 2 into 1 Exhaust with Dual-Position Muffler: Manufacturer part # p4402489 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; muffler body can be installed with the end cap in the slash-up or slash-down position. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... p4402489
2 on hand

More Info/Options for BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489

$769.99 Cheap BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489 4402539
Manufacturer: BUB
Dennis Kirk Part #: 4402539
BUB 2 into 1 Exhaust with Dual-Position Muffler: Manufacturer part # p4402489 - DennisKirk Part # 4402539 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; muffler body can be installed with the end cap in the slash-up or slash-down position. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... p4402489
1 on hand

More Info/Options for BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489 4402539

$686.99 Cheap BUB 2 into 2 Exhaust p4402490
Manufacturer: BUB
Dennis Kirk Part #: 4402490
BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Will not fit with floorboards. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. p4402490
Expected Soon

More Info/Options for BUB 2 into 2 Exhaust p4402490

$721.99 Cheap BUB 2 into 2 Exhaust p4402490 4402545
Manufacturer: BUB
Dennis Kirk Part #: 4402545
BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402545 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front pipe. , 2. (1) Front heat shield. , 3. (1) Rear pipe. , 4. (1) Rear heat shield. , 5. (1) Mounting bracket. , 6. (2) Saddle Bracket. , 7. (2) Muffler clamps. , 8. (6) Heat shield clamp. , 9. (4) 5/16" lock nuts. , 10. (3) 5/16"-18 x 3 1/4" allen bolts. , 11. (1) 5/16"-18 x 3/4" allen bolts. , 12. (4) 5/16" 3/4" Hex bolt. , 13. (12) 5/16" flat wsaher. , 14. (2) Transmission spacer. , 15. (2) Saddle bracket gaskets. , 16. (1) Black zip tie. , 17. (1) Instructions. p4402490
1 on hand

More Info/Options for BUB 2 into 2 Exhaust p4402490 4402545

$721.99 Cheap BUB 2 into 2 Exhaust p4402490 4402546
Manufacturer: BUB
Dennis Kirk Part #: 4402546
BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402546 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front Pipe. , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Mount bracket. , 5. (2) Saddle brackets. , 6. (2) Muffler Clamp. , 7. (6) Heat shield clamps. , 8. (4) 5/16" Lock nut. , 9. (3) 5/16"-18 x 3 1/4" allen bolt. , 10. (1) 5/16-18 x 7/8" allen bolt. , 11. (1) 1/4"-20 x 1 1/4" allen bolt. , 12. (4) 5/16" 3/4" hex bolts. , 13. (1) 1/4" flat washer. , 14. (12) 5/16" Flat washers. , 15. (2) Transmission spacer. , 16. (2) Saddle bracket gasket. , 17. (1) Instructions. p4402490
1 on hand

More Info/Options for BUB 2 into 2 Exhaust p4402490 4402546

$721.99 Cheap BUB 2 into 2 Exhaust p4402490 4402547
Manufacturer: BUB
Dennis Kirk Part #: 4402547
BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402547 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE:, There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing., , Will not fit with forward controls. , , Included Items:. , 1. (1) Front header , 2. (1) Front heat shield. , 3. (1) Rear header. , 4. (1) Rear heat shield. , 5. (1) Mounting bracket. , 6. (2) Saddle brackets. , 7. (2) Muffler clamps. , 8. (6) Heat shield clamps. , 9. (4) 5/16" lock nuts. , 10. (4) 5/16" 3/4" hex bolts. , 11. (8) 5/16" Flat washers. , 12. (2) Saddle bracket gaskets. , 13. (1) Instruction sheet. p4402490
1 on hand

More Info/Options for BUB 2 into 2 Exhaust p4402490 4402547

$721.99 Cheap BUB 2 into 2 Exhaust p4402490 4402548
Manufacturer: BUB
Dennis Kirk Part #: 4402548
BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402548 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front pipe. , 2. (1) Front heat shield. , 3. (1) Rear Pipe. , 4. (1) Rear Heat Shield. , 5. (1) Slide bracket. , 6. (1) Mounting bracket. , 7. (2) Saddle bracket. , 8. (2) Saddle btk. Rubber Gsk.. , 9. (2) Muffler clamp. , 10. (5) Heat shield clamp. , 11. (4) 5/16"-18 locking nut. , 12. (2) 5/16"-18 nylok. , 13. (2) 5/16" 7/8" hex bolt. , 14. (12) 5/16" flat washers. , 15. (1) Instruction sheet. p4402490