|
|
$2450.95
Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402149
Dennis Kirk Part #: 4402149
Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402149: Manufacturer part # SY10RFT9TDTT - Oval-shaped can. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical shaped, hydroformed header and link pipe are made of stainless steel or titanium; type of construction is based on maximum increase in performance. Crossover tubes may be installed based on the results of testing. Most models come with preinstalled fitting for lambda connection. Ceramic anti-seizing grease, made especially for use with titanium, is used to prevent seizing, corrosion and excessive wear of parts of the exhaust system made of titanium (due to vibration and extreme temperatures). Evolution Kit systems are available for select models; intended only for races that allow louder exhaust systems (107 dB). Evolution Kit systems feature a 300mm muffler, high-mount design and include a carbon fiber muffler mounting bracket. , NOTE: Titanium header , NOTE: This item ships in 3-4 days after the order is placed., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. SY10RFT9TDTT
1 on Hand
More Info/Options for Akrapovic 4-2-1 Evolution Exhaust System w/Titanium Muffler 4402149
|
|
|
|
|
|
|
|
|
|
$457.95
Akrapovic Bolt-On Muffler With Carbon Fiber Muffler Sleeve 4400375
Dennis Kirk Part #: 4400375
Akrapovic Bolt-On Muffler With Carbon Fiber Muffler Sleeve 4400375: Manufacturer part # SH9BO2C - Oval- or round-shaped can (based on the structure of the tempered connection at the end of the header) with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts. INCLUDED ITEMS: One muffler. One muffler hanger. Three 8mm-1.25 x 15mm shoulder bolts. One tube bolt sealant. One instruction sheet. CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH9BO2C
1 on Hand
More Info/Options for Akrapovic Bolt-On Muffler With Carbon Fiber Muffler Sleeve 4400375
|
|
|
|
$430.95
Akrapovic Bolt-On Muffler With Carbon Fiber Muffler Sleeve 4400377
Dennis Kirk Part #: 4400377
Akrapovic Bolt-On Muffler With Carbon Fiber Muffler Sleeve 4400377: Manufacturer part # SS10BO1C - Oval- or round-shaped can (based on the structure of the tempered connection at the end of the header) with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts. INCLUDED ITEMS: One muffler. One muffler hanger. Three 8mm-1.25 x 15mm shoulder bolts. One tube bolt sealant. One instruction sheet. CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS10BO1C
1 on Hand
More Info/Options for Akrapovic Bolt-On Muffler With Carbon Fiber Muffler Sleeve 4400377
|
|
|
|
$457.95
Akrapovic Bolt-On Muffler With Titanium Muffler Sleeve 4400376
Dennis Kirk Part #: 4400376
Akrapovic Bolt-On Muffler With Titanium Muffler Sleeve 4400376: Manufacturer part # SH9BO2T - Oval- or round-shaped can (based on the structure of the tempered connection at the end of the header) with titanium outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts. CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH9BO2T
1 on Hand
More Info/Options for Akrapovic Bolt-On Muffler With Titanium Muffler Sleeve 4400376
|
|
|
|
$430.95
Akrapovic Bolt-On Muffler With Titanium Muffler Sleeve 4400379
Dennis Kirk Part #: 4400379
Akrapovic Bolt-On Muffler With Titanium Muffler Sleeve 4400379: Manufacturer part # SS10BO1T - Oval- or round-shaped can (based on the structure of the tempered connection at the end of the header) with titanium outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts. CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS10BO1T
1 on Hand
More Info/Options for Akrapovic Bolt-On Muffler With Titanium Muffler Sleeve 4400379
|
|
|
|
$815.95
Akrapovic Dual Oval Bolt-On Mufflers With Titanium Muffler Sleeves 4400445
Dennis Kirk Part #: 4400445
Akrapovic Dual Oval Bolt-On Mufflers With Titanium Muffler Sleeves 4400445: Manufacturer part # SS10BO2T - Oval-shaped can with titanium outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS10BO2T
1 on Hand
More Info/Options for Akrapovic Dual Oval Bolt-On Mufflers With Titanium Muffler Sleeves 4400445
|
|
|
|
$804.95
Akrapovic Dual Bolt-On Mufflers With Carbon Fiber Muffler Sleeves 4400381
Dennis Kirk Part #: 4400381
Akrapovic Dual Bolt-On Mufflers With Carbon Fiber Muffler Sleeves 4400381: Manufacturer part # SS13BO1C - Oval- or round-shaped can (based on the structure of the tempered connection at the end of the header) with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts. CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , , Included Items: , (2) Slip-On Mufflers, (2) Hanger Straps, (1) Tube Bolt Sealant, (6) 6mm-1.25 x 20mm Shoulder Bolts Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SS13BO1C
1 on Hand
More Info/Options for Akrapovic Dual Bolt-On Mufflers With Carbon Fiber Muffler Sleeves 4400381
|
|
|
|
$897.95
Akrapovic Dual Hexagonal Bolt-On Mufflers with Carbon Fiber Muffler Sleeves 4401117
Dennis Kirk Part #: 4401117
Akrapovic Dual Hexagonal Bolt-On Mufflers with Carbon Fiber Muffler Sleeves 4401117: Manufacturer part # SK10BO1ZC - Hexagonal canister with carbon fiber outer sleeve. Hexagonal mufflers have a carbon fiber outlet cap while the perforated inner sleeve and inlet cap are titanium. Inlet cap joint is CNC-machined and connected by tempered silicon-shielded springs. Lightweight carbon fiber muffler clamp included. Stainless steel link pipe is either conical or cylindrical based on the connection to the muffler to produce the maximum performance boost. Some mufflers include a carbon fiber heat shield. , NOTE: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals my lead to failure of the front rosettes. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships in 3-4 days after the order is processed. SK10BO1ZC
1 on Hand
More Info/Options for Akrapovic Dual Hexagonal Bolt-On Mufflers with Carbon Fiber Muffler Sleeves 4401117
|
|
|
|
$1059.99
Akrapovic Dual Hexagonal Bolt-On Mufflers with Titanium Muffler Sleeve 4401118
Dennis Kirk Part #: 4401118
Akrapovic Dual Hexagonal Bolt-On Mufflers with Titanium Muffler Sleeve 4401118: Manufacturer part # SK10BO1ZT - Hexagonal canister with titanium outer sleeve. Hexagonal mufflers have a carbon fiber outlet cap while the perforated inner sleeve and inlet cap are titanium. Inlet cap joint is CNC-machined and connected by tempered silicon-shielded springs. Lightweight carbon fiber muffler clamp included. Stainless steel or titanium link pipe is either conical or cylindrical based on the connection to the muffler to produce the maximum performance boost. Some mufflers include a carbon fiber heat shield, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SK10BO1ZT
1 on Hand
More Info/Options for Akrapovic Dual Hexagonal Bolt-On Mufflers with Titanium Muffler Sleeve 4401118
|
|
|
|
$897.95
Akrapovic Dual Hexagonal Bolt-On Mufflers with Titanium Muffler Sleeve 4401118
Dennis Kirk Part #: 4401118
Akrapovic Dual Hexagonal Bolt-On Mufflers with Titanium Muffler Sleeve 4401118: Manufacturer part # SK10BO1ZT - Hexagonal canister with titanium outer sleeve. Hexagonal mufflers have a carbon fiber outlet cap while the perforated inner sleeve and inlet cap are titanium. Inlet cap joint is CNC-machined and connected by tempered silicon-shielded springs. Lightweight carbon fiber muffler clamp included. Stainless steel or titanium link pipe is either conical or cylindrical based on the connection to the muffler to produce the maximum performance boost. Some mufflers include a carbon fiber heat shield, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SK10BO1ZT
1 on Hand
More Info/Options for Akrapovic Dual Hexagonal Bolt-On Mufflers with Titanium Muffler Sleeve 4401118
|
|
|
|
$815.95
Akrapovic Dual Oval Bolt-On Mufflers With Carbon Fiber Muffler Sleeves 4400444
Dennis Kirk Part #: 4400444
Akrapovic Dual Oval Bolt-On Mufflers With Carbon Fiber Muffler Sleeves 4400444: Manufacturer part # SS10BO2C - Oval- can with carbon-fiber outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. To obtain minimum size and weight with unmatched durability, the front rosettes are manufactured on a CNC machine from a solid block of special aluminum alloy. Includes lightweight, compact and high-temperature-resistant carbon-fiber muffler clamps. Titanium bolts, with a special temperature-resistant sealant that prevents unseating, take the place of standard bolts. CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed.. SS10BO2C
1 on Hand
More Info/Options for Akrapovic Dual Oval Bolt-On Mufflers With Carbon Fiber Muffler Sleeves 4400444
|
|
|
|
$1354.99
Akrapovic Dual Oval Slip-on Mufflers with Carbon Fiber Muffler Sleeves 4400455
Dennis Kirk Part #: 4400455
Akrapovic Dual Oval Slip-on Mufflers with Carbon Fiber Muffler Sleeves 4400455: Manufacturer part # SH10SO2TC - Oval-shaped cans with carbon fiber outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. Joint of the inlet caps are milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of stainless steel or titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Intake and Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SH10SO2TC
1 on Hand
More Info/Options for Akrapovic Dual Oval Slip-on Mufflers with Carbon Fiber Muffler Sleeves 4400455
|
|
|
|
$868.95
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400403
Dennis Kirk Part #: 4400403
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400403: Manufacturer part # SK10SO1DC - Oval-shaped cans with carbon-fiber outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. Joints of the inlet cap are milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Includes lightweight, compact and high-temperature-resistant carbon-fiber muffler clamps. Conical or cylindrical link pipe is made of stainless steel or titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed. SK10SO1DC
1 on Hand
More Info/Options for Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400403
|
|
|
|
$835.95
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400405
Dennis Kirk Part #: 4400405
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400405: Manufacturer part # SK12SO1DC - Oval-shaped cans with carbon-fiber outer sleeves. Outlet caps, perforated inner sleeves and inlet caps are all made of titanium. Joints of the inlet cap are milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Includes lightweight, compact and high-temperature-resistant carbon-fiber muffler clamps. Conical or cylindrical link pipe is made of stainless steel or titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships 3-4 business days after order is placed. SK12SO1DC
1 on Hand
More Info/Options for Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400405
|
|
|
|
$898.95
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400431
Dennis Kirk Part #: 4400431
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400431: Manufacturer part # SD6MSO1DTC - Oval-shaped can with carbon fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SD6MSO1DTC
1 on Hand
More Info/Options for Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400431
|
|
|
|
$1287.99
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400433
Dennis Kirk Part #: 4400433
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400433: Manufacturer part # SD9MSO1DTC - Oval-shaped can with carbon fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made | |
