|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$42.99
53 1/2 in. Motion Pro Argent Clutch Cables
Dennis Kirk Part #: 1900651
53 1/2 in. Motion Pro Argent Clutch Cables: Manufacturer part # 680369 - Standard replacement cables are spiral (coil) wound, heavy-duty cables are wound longitudinally in the housing lengthwise rather than in a conventional spiral wind so cables bend in a more natural arc; eliminates spring and compression. Use stainless steel inner wiring for smooth, precise action. Center Adjuster Location. NOTE: Length given is the installed length. 680369
1 on Hand
More Info/Options for 53 1/2 in. Motion Pro Argent Clutch Cables
|
|
|
|
|
|
|
|
$51.99
53 in. Barnett Stainless Steel Clutch Cables
Dennis Kirk Part #: HC786
53 in. Barnett Stainless Steel Clutch Cables: Manufacturer part # 62186ASC - Smooth working, long lasting, made with the finest components available and virtually indestructible; this can only be describing Barnett cables. Cables are available in either stainless steel or black vinyl. Stainless steel cables with clear coating offer a custom look without the fear of damaging areas on your bike that cables come in contact with. Black vinyl cables come with nylon-lined, PVC coated casings in standard diameters. 53 in. Long. Adjuster Location: Center. , NOTE: Late style cables are measured with the adjuster completely collapsed. 62186ASC
1 on Hand
More Info/Options for 53 in. Barnett Stainless Steel Clutch Cables
|
|
|
|
$57.99
53 in. Magnum 90 degree Braided Custom Brake Lines
Dennis Kirk Part #: 1902355
53 in. Magnum 90 degree Braided Custom Brake Lines: Sames features as the other Chromite II brake lines. Polished stainless braid is more brilliant than regular stainless; Black Pearl braid features black-chrome fittings. 90 degree, 35 degree, or 180 degree 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36 in. - 74 in.. All lines (except XL 04-07) have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end; 04-08 XL lines have a 10mm banjo fitting on the master cylinder end and a 10mm 60 degree banjo fitting on the caliper end..
1 on Hand
More Info/Options for 53 in. Magnum 90 degree Braided Custom Brake Lines
|
|
|
|
$31.95
530/43 Parts Unlimited Sprocket
Dennis Kirk Part #: 849543S
530/43 Parts Unlimited Sprocket: Manufacturer part # 41201MV9000 - All front sprockets are hardened steel for long life. Rear sprockets are only available in steel. A new drive chain is recommended every time the sprockets are replaced. , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 41201MV9000
10+ on hand
More Info/Options for 530/43 Parts Unlimited Sprocket
|
|
|
|
$31.95
530/45 Parts Unlimited Sprocket
Dennis Kirk Part #: 849545S
530/45 Parts Unlimited Sprocket: Manufacturer part # 41205MV9000 - All front sprockets are hardened steel for long life. Rear sprockets are only available in steel. A new drive chain is recommended every time the sprockets are replaced. , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 41205MV9000
7 on Hand
More Info/Options for 530/45 Parts Unlimited Sprocket
|
|
|
|
$174.99
533M08000 Wiseco Piston Assembly - 80mm Bore
Dennis Kirk Part #: 533M08000
533M08000 Wiseco Piston Assembly - 80mm Bore: Manufacturer part # 533M08000 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. FL350R Odyssey 1985 - is a 329cc motor overbore kit, also fits original Honda OEM 350 engine only INCLUDED ITEMS: One piston. One set 3150TD rings. One pair CW18 circlips. One S257 wrist pin.. 533M08000
1 on Hand
More Info/Options for 533M08000 Wiseco Piston Assembly - 80mm Bore
|
|
|
|
$174.99
533M08050 Wiseco Piston Assembly - 80.5mm Bore
Dennis Kirk Part #: 533M08050
533M08050 Wiseco Piston Assembly - 80.5mm Bore: Manufacturer part # 533M08050 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. FL350R Odyssey 1985 - is a 329cc motor overbore kit, also fits original Honda OEM 350 engine only INCLUDED ITEMS: One piston. Two 3169TD rings. Two CW18 circlips. One S257 wrist pin.. 533M08050
1 on Hand
More Info/Options for 533M08050 Wiseco Piston Assembly - 80.5mm Bore
|
|
|
|
$174.99
533M08100 Wiseco Piston Assembly - 81mm Bore
Dennis Kirk Part #: 533M08100
533M08100 Wiseco Piston Assembly - 81mm Bore: Manufacturer part # 533M08100 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. FL350R Odyssey 1985 - is a 329cc motor overbore kit, also fits original Honda OEM 350 engine only INCLUDED ITEMS: One piston. Two 3189TD rings. Two CW18 circlips. One S257 wrist pin.. 533M08100
2 on Hand
More Info/Options for 533M08100 Wiseco Piston Assembly - 81mm Bore
|
|
|
|
$191.99
533M08150 Wiseco Piston Assembly - 81.5mm Bore
Dennis Kirk Part #: 533M08150
533M08150 Wiseco Piston Assembly - 81.5mm Bore: Manufacturer part # 533M08150 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. FL350R Odyssey 1985 - is a 329cc motor overbore kit, also fits original Honda OEM 350 engine only INCLUDED ITEMS: One piston. Two 3209TD rings. Two CW18 circlips. One S257 wrist pin.. 533M08150
2 on Hand
More Info/Options for 533M08150 Wiseco Piston Assembly - 81.5mm Bore
|
|
|
|
$191.99
533M08200 Wiseco Piston Assembly - 82mm Bore
Dennis Kirk Part #: 533M08200
533M08200 Wiseco Piston Assembly - 82mm Bore: Manufacturer part # 533M08200 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. FL350R Odyssey 1985 - is a 329cc motor overbore kit, also fits original Honda OEM 350 engine only INCLUDED ITEMS: One piston. Two 3228TD rings. Two CW18 circlips. One S257 wrist pin.. 533M08200
1 on Hand
More Info/Options for 533M08200 Wiseco Piston Assembly - 82mm Bore
|
|
|
|
$125.99
534M07000 Wiseco Piston Assembly - 70mm Bore
Dennis Kirk Part #: 534M07000
534M07000 Wiseco Piston Assembly - 70mm Bore: Manufacturer part # 534M07000 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. Liquid cool, must use stock thrust washers INCLUDED ITEMS: One piston. Two 2756CD rings. Two CW18 circlips. One S513 wrist pin. NOTE: The original thrust washers, located on each side of the needle cage bearing, must be used with this piston. 534M07000
2 on Hand
More Info/Options for 534M07000 Wiseco Piston Assembly - 70mm Bore
|
|
|
|
$125.99
534M07050 Wiseco Piston Assembly - 70.5mm Bore
Dennis Kirk Part #: 534M07050
534M07050 Wiseco Piston Assembly - 70.5mm Bore: Manufacturer part # 534M07050 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. Liquid cool, must use stock thrust washers INCLUDED ITEMS: One piston. Two 2776CD rings. Two CW18 circlips. One S513 wrist pin. . NOTE: The original thrust washers, located on each side of the needle cage bearing, must be used with this piston. 534M07050
1 on Hand
More Info/Options for 534M07050 Wiseco Piston Assembly - 70.5mm Bore
|
|
|
|
$125.99
534m07100 Wiseco Piston Assembly - 71mm Bore
Dennis Kirk Part #: 534m07100
534m07100 Wiseco Piston Assembly - 71mm Bore: Manufacturer part # 534M07100 - Wiseco forged pistons are superior in strength and design. We carry the full line of Wiseco forged pistons, big bore kits and related items. Liquid cool, must use stock thrust washers INCLUDED ITEMS: One piston. Two 2795CD rings. Two CW18 circlips. One S513 wrist pin. NOTE: The original thrust washers, located on each side of the needle cage bearing, must be used with this piston. 534M07100
1 on Hand
More Info/Options for 534m07100 Wiseco Piston Assembly - 71mm Bore
|
|
|
|
