Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Sno-Stuff X-Calibar III Carbide Wear Rods 506-627

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-431 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031931 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-431 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III feature six inches of 60º center carbide. One-inch carbide pads front and rear. Hardweld filler between front and rear carbide for added wear resistance.. 506-431 4 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-431

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-616 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03545 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-616 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III features six inches of 60º center carbide. 1 1/4 in. carbide wear pads front and rear. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 506-616 7 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-616

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-618 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03477 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-618 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III features six inches of 60º center carbide. 1 1/4 in. carbide wear pads front and rear. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 506-618 10 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-618

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-621 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03991 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-621 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III features six inches of 60º center carbide. 1 1/4 in. carbide wear pads front and rear. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 506-621 5 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-621

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-626 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031373 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-626 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III features six inches of 60º center carbide. 1 1/4 in. carbide wear pads front and rear. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 506-626 1 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-626

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-627 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031479 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-627 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III features six inches of 60º center carbide. 1 1/4 in. carbide wear pads front and rear. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 506-627 1 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-627

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-628 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031814 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-628 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for Yamaha (remove paint from studs for easier installation). Longer studs work with ski skins. X-Calibar III features six inches of 60° center carbide. 1 1/4 in. carbide wear pads front and rear. Hardweld filler between front and rear carbide for added wear resistance. NOTE: Some models require drilling extra hole(s) in skis to mount carbides. 506-628 4 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-628

$66.99 Cheap Sno-Stuff X-Calibar III Carbide Wear Rods 506-629 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031815 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-629 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for Yamaha (remove paint from studs for easier installation). Longer studs work with ski skins. X-Calibar III features six inches of 60° center carbide. 1 1/4 in. carbide wear pads front and rear. Hardweld filler between front and rear carbide for added wear resistance. NOTE: Some models require drilling extra hole(s) in skis to mount carbides.. 506-629 9 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-629

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-120 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031082 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-120 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar IV features eight inches of 60º carbide. Designed for demanding trail riders and racing enthusiasts. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 507-120 4 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-120

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-122 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031616 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-122 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar IV features eight inches of 60º carbide. Designed for demanding trail riders and racing enthusiasts. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 507-122 4 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-122

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-204 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03548 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-204 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar IV features eight inches of 60º carbide. Designed for demanding trail riders and racing enthusiasts. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides, , NOTE: , Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14 3/4 in. long. 507-204 More than 10 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-204

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-205 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03992 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-205 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar IV features eight inches of 60º carbide. Designed for demanding trail riders and racing enthusiasts. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides, , NOTE: , Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 28 in. design., , NOTE: , Will not work on 2002 models with dual rods on one ski.. 507-205 2 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-205

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-429 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031370 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-429 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar IV features eight inches of 60º carbide. Designed for demanding trail riders and racing enthusiasts. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 507-429 3 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-429

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-627 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031499 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-627 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar IV features eight inches of 60º carbide. Designed for demanding trail riders and racing enthusiasts. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 507-627 1 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-627

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-628 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031816 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-628 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for Yamaha (remove paint from studs for easier installation). Longer studs work with ski skins. X-Calibar IV features eight inches of 60° carbide. Designed for demanding trail riders and racing enthusiasts. Two 1 in. wear pads front and rear for maximum wear resistance and extreme control. NOTE: Some models require drilling extra hole(s) in skis to mount carbides. 507-628 3 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-628

$85.99 Cheap Sno-Stuff X-Calibar IV Carbide Wear Rods 507-629 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031817 Sno-Stuff X-Calibar IV Carbide Wear Rods: Manufacturer part # 507-629 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for Yamaha (remove paint from studs for easier installation). Longer studs work with ski skins. X-Calibar IV features eight inches of 60° carbide. Designed for demanding trail riders and racing enthusiasts. Two 1 in. wear pads front and rear for maximum wear resistance and extreme control. NOTE: Some models require drilling extra hole(s) in skis to mount carbides.. 507-629 1 on hand More Info/Options for Sno-Stuff X-Calibar IV Carbide Wear Rods 507-629

$281.99 Cheap Sno-Stuff X-Calibar Ski Bottoms - Black 575-500 Manufacturer: Sno-Stuff Dennis Kirk Part #: 105917 Sno-Stuff X-Calibar Ski Bottoms - Black: Manufacturer part # 575-500 - This ski is the cutting edge of performance, features and style. Made of UHMW PE material. Ski design is a 1 in. steep and deep keel. Parabolic design and opposing curve fins front and back make this a non-traditional single-runner ski. This results in excellent corner-carving ability and high levels of traction. Darting effect is greatly reduced by the bell nose keel that keeps the center carbide cutting a fresh path. 6.375 in. wide at the tip of the ski. Ski blades sold in pairs; include standard wear bars (installed) and black ski loop. Mount kit must be ordered separately. Replacement wear bars sold separately. DIMENISIONS: Bottom Length: 42-3/4in.. Top Length: 40-3/4in.. Width Across Top: 6-3/8in.. MOUNTING HOLES CENTER DISTANCE FROM: Front to 1st: 16-5/8in.. 1st to 2nd: 3-1/8in.. 2nd to 3rd: 9-1/2in.. 3rd to end: 11-1/2in.. NOTE: Arctic Cat models with OEM blow-molded skis require two Arctic Cat number 0603-036 ruber dampeners to install. 575-500 2 on hand More Info/Options for Sno-Stuff X-Calibar Ski Bottoms - Black 575-500

CLEARANCE! Was: $251.99 Now: $188.99 Cheap Sno-Stuff X-Calibar Ski Bottoms - Red 575-500-82 Manufacturer: Sno-Stuff Dennis Kirk Part #: 105918 Sno-Stuff X-Calibar Ski Bottoms - Red: Manufacturer part # 575-500-82 - This ski is the cutting edge of performance, features and style. Made of UHMW PE material. Ski design is a 1 in. steep and deep keel. Parabolic design and opposing curve fins front and back make this a non-traditional single-runner ski. This results in excellent corner-carving ability and high levels of traction. Darting effect is greatly reduced by the bell nose keel that keeps the center carbide cutting a fresh path. 6.375 in. wide at the tip of the ski. Ski blades sold in pairs; include standard wear bars (installed) and black ski loop. Mount kit must be ordered separately. Replacement wear bars sold separately. DIMENISIONS: Bottom Length: 42-3/4in.. Top Length: 40-3/4in.. Width Across Top: 6-3/8in.. MOUNTING HOLES CENTER DISTANCE FROM: Front to 1st: 16-5/8in.. 1st to 2nd: 3-1/8in.. 2nd to 3rd: 9-1/2in.. 3rd to end: 11-1/2in.. NOTE: Arctic Cat models with OEM blow-molded skis require two Arctic Cat number 0603-036 ruber dampeners to install. 575-500-82 2 on hand More Info/Options for Sno-Stuff X-Calibar Ski Bottoms - Red 575-500-82

$281.99 Cheap Sno-Stuff X-Calibar Ski Bottoms - Yellow 575-500-87 Manufacturer: Sno-Stuff Dennis Kirk Part #: 105921 Sno-Stuff X-Calibar Ski Bottoms - Yellow: Manufacturer part # 575-500-87 - This ski is the cutting edge of performance, features and style. Made of UHMW PE material. Ski design is a 1 in. steep and deep keel. Parabolic design and opposing curve fins front and back make this a non-traditional single-runner ski. This results in excellent corner-carving ability and high levels of traction. Darting effect is greatly reduced by the bell nose keel that keeps the center carbide cutting a fresh path. 6.375 in. wide at the tip of the ski. Ski blades sold in pairs; include standard wear bars (installed)