|
|
|
|
|
|
|
|
|
|
|
|
$50.99
29 in. Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 199012
29 in. Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37629 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37629
1 on Hand
More Info/Options for 29 in. Magnum 3/8 in./10mm 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$50.99
29 in. Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 198972
29 in. Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37229 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37229
2 on Hand
More Info/Options for 29 in. Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$50.99
29 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900588
29 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37129 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Line is 11" long with 35° upper banjo fitting, ensuring a clean, custom look. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , Included Items: , (1) Brake line 11 in. w/one 10mm 35-degree banjo and one 3/8-24 female inverted flare, (2) 10mm crush washers, , NOTE: , Upper and lower lines must be purchased separately (see below for Part No.'s), , Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37129
1 on Hand
More Info/Options for 29 in. Magnum 3/8 in./10mm, 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$50.99
29 in. Magnum 7/16 in. 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 198982
29 in. Magnum 7/16 in. 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37329 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37329
1 on Hand
More Info/Options for 29 in. Magnum 7/16 in. 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$50.99
29 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 199022
29 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37729 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnums Sterling Chromite II finish; fittings are polished chrome. Now its easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11"-39" with 90,35 and straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE: , Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37729
2 on Hand
More Info/Options for 29 in. Magnum 7/16 in., 180 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$50.99
29 in. Magnum 7/16", 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
Dennis Kirk Part #: 1900605
29 in. Magnum 7/16", 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line: Manufacturer part # 37929 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece lower line assemblies -- lines are brazed into polished-chrome banjo fittings at the caliper end and a polished chrome junction block at the other, so you just bolt the fittings to the calipers and the junction block to the bottom of the triple tree. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line 7/16 in., 35 degree banjo fitting. Meet DOT MVSS-106 specifications. Made in the U.S.A.. , , NOTE:, Upper and lower lines must be purchased separately, , For use with lower brake line assemblys: H19-971, H19-975, H19-972, H19-973, H19-974 and H19-9151. 37929
1 on Hand
More Info/Options for 29 in. Magnum 7/16", 35 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line
|
|
|
|
$105.99
29 in. Widder Lectric-Heat Chaps
Dennis Kirk Part #: H3520029
29 in. Widder Lectric-Heat Chaps: Manufacturer part # E2 - Seven elastic/hook-and-loop straps make the heating element conform to your legs; easy to get on and off. Constructed of 100% polyester outer shell, 100% nylon lining and 65% polyolefin/35% Thinsulate insulation Lightweight design enables them to be worn under your pants, leathers or riding suit. Install by simply plugging them into your Lectric-Vest or by using a switch cord and battery cord; hookups/plugs sold separately. Include 12" cord with female plug to connect to vest. Also includes a splitter with a male connector so these can be used alone; if used alone, 19" battery cord PART NO. H35-101 or 45" battery cord PART NO. H35-102 must be used, and either a switch cord (on/off only) PART NO. H35-123 or a bi-metal thermostat cord PART NO. H35-125, non-coiled electronic cord PART NO. H35-126 or electronic cord PART NO. H35-127 must be used. Chaps are sold in pairs and cover upper and lower leg; secured by six hook-and-loop straps. Available in men's inseam lengths 27, 29, 31, 33 and 35.. E2
3 on Hand
More Info/Options for 29 in. Widder Lectric-Heat Chaps
|
|
|
|
|
|
|
|
|
|
$124.99
29 in./X-Small HJC Womens Type R Bibs
Dennis Kirk Part #: 353389XS
29 in./X-Small HJC Womens Type R Bibs: Manufacturer part # 948-091 - 100% waterproof outer shell made of Oxford 600 denier polyester. DuPont® Hollofil 6oz insulation. Waterproof Cordura seat and knees. Two zippered Bemberg-lined handwarmer pockets plus a chest pocket. Two-way zipper on front. Waist high YKK two-way zippers with hook-and-loop storm flaps. Double stitched seams. Padded stretch back and elastic inner snow cuffs. Drop Seat design.. 948-091
4 on Hand
More Info/Options for 29 in./X-Small HJC Womens Type R Bibs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$30.99
2953XG Wiseco Piston Ring Set
Dennis Kirk Part #: 2953XG
2953XG Wiseco Piston Ring Set: Manufacturer part # 2953XG - Set contains rings for one piston. Correct replacement ring style is stamped on dome of piston (example: A for XA, C for XC, G for XG, and H for XH). Wiseco rings fit only Wiseco pistons.. 2953XG
| |
