|
|
$631.95
Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 444444
Dennis Kirk Part #: 444444
Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 444444: Manufacturer part # 1269 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include headpipes. Slash-Cut Tip Drag Pipes are 2 in. diameter. Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Drag pipes are 6 into 6 design with three pipes exiting on each side, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1269
1 on Hand
More Info/Options for Cobra 2 in. Slash-Cut Tip Drag Pipes Exhaust System 444444
|
|
|
|
$252.95
Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 443873
Dennis Kirk Part #: 443873
Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 443873: Manufacturer part # 4265 - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. 2 in. Muffler bodies are used on the OEM headpipes, which also eliminates the original muffler box (if so equipped). Baffles are non-removable. No re-jetting necessary although it is recommended for best performance. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 4265
1 on Hand
More Info/Options for Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 443873
|
|
|
|
$252.95
Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 445673
Dennis Kirk Part #: 445673
Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 445673: Manufacturer part # 3262 - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. 2 in. Muffler bodies are used on the OEM headpipes, which also eliminates the original muffler box (if so equipped). Baffles are non-removable. No re-jetting necessary although it is recommended for best performance. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 3262
1 on Hand
More Info/Options for Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 445673
|
|
|
|
$360.99
Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 449857
Dennis Kirk Part #: 449857
Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 449857: Manufacturer part # 2264 - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. 2 in. Muffler bodies are used on the OEM headpipes, which also eliminates the original muffler box (if so equipped). Baffles are non-removable. No re-jetting necessary although it is recommended for best performance. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2264
4 on Hand
More Info/Options for Cobra 2 in. Slash-Cut Tip Slip-On Mufflers 449857
|
|
|
|
|
|
|
|
$399.99
Cobra 4 in. Slip-On Mufflers with Billet Tip 4400248
Dennis Kirk Part #: 4400248
Cobra 4 in. Slip-On Mufflers with Billet Tip 4400248: Manufacturer part # 6202 - Quality mufflers welded from mild steel then subjected to a four-step chrome-plating process. Unique cooling chamber helps prevent blueing. Trouble-free installation -- all necessary mounting hardware and instructions are included. Removable baffles. Made in the U.S.A., , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6202
2 on Hand
More Info/Options for Cobra 4 in. Slip-On Mufflers with Billet Tip 4400248
|
|
|
|
$354.99
Cobra 4 in. Slip-On Slash-Cut Mufflers 448281
Dennis Kirk Part #: 448281
Cobra 4 in. Slip-On Slash-Cut Mufflers 448281: Manufacturer part # 6201SC - Quality mufflers welded from mild steel then subjected to a four-step chrome-plating process. Unique cooling chamber helps prevent blueing. Trouble-free installation all necessary mounting hardware and instructions are included. Made in the U.S.A. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6201SC
1 on Hand
More Info/Options for Cobra 4 in. Slip-On Slash-Cut Mufflers 448281
|
|
|
|
$354.99
Cobra 4 in. Slip-On Slash-Down Mufflers 448282
Dennis Kirk Part #: 448282
Cobra 4 in. Slip-On Slash-Down Mufflers 448282: Manufacturer part # 6201SD - Quality mufflers welded from mild steel then subjected to a four-step chrome-plating process. Unique cooling chamber helps prevent blueing. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A. NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6201SD
1 on Hand
More Info/Options for Cobra 4 in. Slip-On Slash-Down Mufflers 448282
|
|
|
|
$354.99
Cobra 4 in. Slip-On Upper-Cut Mufflers 448283
Dennis Kirk Part #: 448283
Cobra 4 in. Slip-On Upper-Cut Mufflers 448283: Manufacturer part # 6201UC - Quality mufflers welded from mild steel then subjected to a four-step chrome-plating process. Unique cooling chamber helps prevent blueing. Trouble-free installation all necessary mounting hardware and instructions are included. Made in the U.S.A. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6201UC
1 on Hand
More Info/Options for Cobra 4 in. Slip-On Upper-Cut Mufflers 448283
|
|
|
|
$161.99
Cobra 4-Stroke Exhaust System 44140
Dennis Kirk Part #: 44140
Cobra 4-Stroke Exhaust System 44140: Manufacturer part # 1033AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Black steel head pipe included. Reverse-cone design. Exhaust gaskets are not included but are recommended every time a new system is installed; This system requires part #20-1060. These are very loud.. 1033AL
2 on Hand
More Info/Options for Cobra 4-Stroke Exhaust System 44140
|
|
|
|
$161.99
Cobra 4-Stroke Exhaust System 44141
Dennis Kirk Part #: 44141
Cobra 4-Stroke Exhaust System 44141: Manufacturer part # 1040AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Black steel head pipe included. Reverse-cone design. Exhaust gaskets are not included but are recommended every time a new system is installed; This system requires part #20-1060. These are very loud.. 1040AL
Expected Soon
More Info/Options for Cobra 4-Stroke Exhaust System 44141
|
|
|
|
$186.99
Cobra 4-Stroke Exhaust System 44143
Dennis Kirk Part #: 44143
Cobra 4-Stroke Exhaust System 44143: Manufacturer part # 1035AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Black steel head pipe included. Reverse-cone design. Exhaust gaskets are not included but are recommended every time a new system is installed; This system requires part #20-1060. These are very loud.. 1035AL
1 on Hand
More Info/Options for Cobra 4-Stroke Exhaust System 44143
|
|
|
|
$113.63
Cobra 4-Stroke Exhaust System 44145
Dennis Kirk Part #: 44145
Cobra 4-Stroke Exhaust System 44145: Manufacturer part # 2022AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Uses stock headpipe. Reverse cone design. Gasket on headpipe must be removed to fit muffler. Rejetting is recommended. This system is very loud.. 2022AL
Expected Soon
More Info/Options for Cobra 4-Stroke Exhaust System 44145
|
|
|
|
$113.63
Cobra 4-Stroke Exhaust System 44146
Dennis Kirk Part #: 44146
Cobra 4-Stroke Exhaust System 44146: Manufacturer part # 3015AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Black steel head pipe included. Reverse-cone design. Exhaust gaskets are not included but are recommended every time a new system is installed; This system requires part #20-1060. These are very loud.. 3015AL
1 on Hand
More Info/Options for Cobra 4-Stroke Exhaust System 44146
|
|
|
|
$113.63
Cobra 4-Stroke Exhaust System 44147
Dennis Kirk Part #: 44147
Cobra 4-Stroke Exhaust System 44147: Manufacturer part # 4014AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Black steel head pipe included. Reverse-cone design. Exhaust gaskets are not included but are recommended every time a new system is installed; This system requires part #20-1060. These are very loud.. 4014AL
Expected Soon
More Info/Options for Cobra 4-Stroke Exhaust System 44147
|
|
|
|
$113.63
Cobra 4-Stroke Exhaust System 44281
Dennis Kirk Part #: 44281
Cobra 4-Stroke Exhaust System 44281: Manufacturer part # 1028AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Black steel head pipe included. Reverse-cone design. Exhaust gaskets are not included but are recommended every time a new system is installed; This system requires part #20-1060. These are very loud.. 1028AL
1 on Hand
More Info/Options for Cobra 4-Stroke Exhaust System 44281
|
|
|
|
$113.63
Cobra 4-Stroke Exhaust System 445877
Dennis Kirk Part #: 445877
Cobra 4-Stroke Exhaust System 445877: Manufacturer part # 1055AL - Cobra's aluminum blends great looks, light weight, and a long life for excellent combination. Brushed aluminum muffler with satin finish. Uses stock headpipe. Reverse cone design. Gasket on headpipe must be removed to fit muffler. Rejetting is recommended. This system is very loud.. 1055AL
1 on Hand
More Info/Options for Cobra 4-Stroke Exhaust System 445877
|
|
|
|
$89.99
Cobra A-Arm Guard 550915
Dennis Kirk Part #: 550915
Cobra A-Arm Guard 550915: Manufacturer part # 505100 - Constructed of aluminum alloy. Aluminum clamps do not cause frame damage. Wrap-around front. Recessed mounting holes protect bolt heads from bending or breaking. Drain holes for added protection against water damage. Simple installation with slotted holes for easy adjustments.. 505100
1 on Hand
More Info/Options for Cobra A-Arm Guard 550915
|
|
|
|
$89.99
Cobra A-Arm Guard 550916
Dennis Kirk Part #: 550916
Cobra A-Arm Guard 550916: Manufacturer part # 505105 - Constructed of aluminum alloy. Aluminum clamps do not cause frame damage. Wrap-around front. Recessed mounting holes protect bolt heads from bending or breaking. Drain holes for added protection against water damage. Simple installation with slotted holes for easy adjustments.. 505105
1 on Hand
More Info/Options for Cobra A-Arm Guard 550916
|
|
|
|
$89.99
Cobra A-Arm Guard 550917
Dennis Kirk Part #: 550917
Cobra A-Arm Guard 550917: Manufacturer part # 505110 - Constructed of aluminum alloy. Aluminum clamps do not cause frame damage. Wrap-around front. Recessed mounting holes protect bolt heads from bending or breaking. Drain holes for added protection against water damage. Simple installation with slotted holes for easy adjustments.. 505110
2 on Hand
More Info/Options for Cobra A-Arm Guard 550917
|
|
|
|
$89.99
Cobra A-Arm Guard 550918
Dennis Kirk Part #: 550918
Cobra A-Arm Guard 550918: Manufacturer part # 505200 - Constructed of aluminum alloy. Aluminum clamps do not cause frame damage. Wrap-around front. Recessed mounting holes protect bolt heads from bending or breaking. Drain holes for added protection against water damage. Simple installation with slotted holes for easy adjustments.. 505200
2 on Hand
More Info/Options for Cobra A-Arm Guard 550918
|
|
|
|
$89.99
Cobra A-Arm Guard 550919
Dennis Kirk Part #: 550919
Cobra A-Arm Guard 550919: Manufacturer part # 505205 - Constructed of aluminum alloy. Aluminum clamps do not cause frame damage. Wrap-around front. Recessed mounting holes protect bolt heads from bending or breaking. Drain holes for added protection against water damage. Simple installation with slotted holes for easy adjustments.. 505205
1 on Hand
More Info/Options for Cobra A-Arm Guard 550919
|
|
|
|
$89.99
Cobra A-Arm Guard 550920
Dennis Kirk Part #: 550920
Cobra A-Arm Guard 550920: Manufacturer part # 505210 - Constructed of aluminum alloy. Aluminum clamps do not cause frame damage. Wrap-around front. Recessed mounting holes protect bolt heads from bending or breaking. Drain holes for added protection against water d | |
