Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Woodys Trail Blazer IV Carbide Wear Rods 031246

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031246 Dennis Kirk Part #: 031246 Woodys Trail Blazer IV Carbide Wear Rods 031246: Manufacturer part # TYV4-6300 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6300 2 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031246

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031247 Dennis Kirk Part #: 031247 Woodys Trail Blazer IV Carbide Wear Rods 031247: Manufacturer part # TYV4-6350 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6350 8 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031247

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031248 Dennis Kirk Part #: 031248 Woodys Trail Blazer IV Carbide Wear Rods 031248: Manufacturer part # TYV4-6450 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6450 10 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031248

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031249 Dennis Kirk Part #: 031249 Woodys Trail Blazer IV Carbide Wear Rods 031249: Manufacturer part # TYV4-6500 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6500 6 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031249

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031337 Dennis Kirk Part #: 031337 Woodys Trail Blazer IV Carbide Wear Rods 031337: Manufacturer part # TSD4-8250 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-8250 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031337

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031376 Dennis Kirk Part #: 031376 Woodys Trail Blazer IV Carbide Wear Rods 031376: Manufacturer part # TAT4-9850 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-9850 3 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031376

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031378 Dennis Kirk Part #: 031378 Woodys Trail Blazer IV Carbide Wear Rods 031378: Manufacturer part # TYV4-6550 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6550 10 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031378

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031502 Dennis Kirk Part #: 031502 Woodys Trail Blazer IV Carbide Wear Rods 031502: Manufacturer part # TCA-5000 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TCA-5000 10 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031502

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031633 Dennis Kirk Part #: 031633 Woodys Trail Blazer IV Carbide Wear Rods 031633: Manufacturer part # TCA-6000 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TCA-6000 6 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031633

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031685 Dennis Kirk Part #: 031685 Woodys Trail Blazer IV Carbide Wear Rods 031685: Manufacturer part # TAT4-9975 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-9975 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031685

$54.99 Woodys Trail Blazer IV Carbide Wear Rods 031689 Dennis Kirk Part #: 031689 Woodys Trail Blazer IV Carbide Wear Rods 031689: Manufacturer part # TPI4-9125 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI4-9125 3 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031689

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031778 Dennis Kirk Part #: 031778 Woodys Trail Blazer IV Carbide Wear Rods 031778: Manufacturer part # TYV4-6580 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TYV4-6580 9 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031778

$61.99 Woodys Trail Blazer IV Carbide Wear Rods 031806 Dennis Kirk Part #: 031806 Woodys Trail Blazer IV Carbide Wear Rods 031806: Manufacturer part # TSD4-9350 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-9350 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031806

$54.99 Woodys Trail Blazer IV Carbide Wear Rods 031897 Dennis Kirk Part #: 031897 Woodys Trail Blazer IV Carbide Wear Rods 031897: Manufacturer part # TPI4-7125 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI4-7125 7 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031897

$54.99 Woodys Trail Blazer IV Carbide Wear Rods 032011 Dennis Kirk Part #: 032011 Woodys Trail Blazer IV Carbide Wear Rods 032011: Manufacturer part # TPI4-1125 - Top-Stock hardweld runner (no carbide) designed for extreme service. A full range of carbide wear rod choices for the casual trail rider to the serious rider with a heavily studded track and even for Snocross competition. Carbide types prevent the rear of higher horsepower performance machines from "pushing" the front, especially on icy trails. Special Shur-Steer carbide designs for Polaris with E-Z Steer. Flat-Top host rods on all types for greater support between runner and ski. See separate descriptions for amount of center turning carbide, carbide wear pads and full-length hardweld filler for durability. All studs are long enough for ski skins. Rears are angle-cut for easier unloading and backing up. Sold in pairs; fastening nuts included. , Dimensions:, Length x Diameter: 17-31/2in. x 3/8in., Stud Diameter x Length: 5/16in. x 1-1/8in., Number of Studs: 3. Stud Center Mounting Distance From:, Front to 1st: 3-1/4in., 1st to 2nd: 7-1/8in., 2nd to 3rd: 4-1/8in., 3rd to End: 2in.. Color:Black.. TPI4-1125 3 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032011

$53.99 Woodys Trail Blazer IV Carbide Wear Rods 032044 Dennis Kirk Part #: 032044 Woodys Trail Blazer IV Carbide Wear Rods 032044: Manufacturer part # TSD4-9550 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-9550 5 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032044

$53.99 Woodys Trail Blazer IV Carbide Wear Rods 032046 Dennis Kirk Part #: 032046 Woodys Trail Blazer IV Carbide Wear Rods 032046: Manufacturer part # TSD4-9255 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-9255 10 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032046

$53.99 Woodys Trail Blazer IV Carbide Wear Rods 032048 Dennis Kirk Part #: 032048 Woodys Trail Blazer IV Carbide Wear Rods 032048: Manufacturer part # TSD4-9455 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-9455 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032048

$60.99 Woodys Trail Blazer IV Carbide Wear Rods 032052 Dennis Kirk Part #: 032052 Woodys Trail Blazer IV Carbide Wear Rods 032052: Manufacturer part # TPI4-1225 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI4-1225 10+ on hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 032052

$54.99 Woodys Trail Blazer IV Carbide Wear Rods 03738 Dennis Kirk Part #: 03738 Woodys Trail Blazer IV Carbide Wear Rods 03738: Manufacturer part # TPI-3180 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TPI-3180 7 on Hand More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 03738

$18.99 Woodys Trail Studding Template 282761 Dennis Kirk Part #: 282761 Woodys Trail Studding Template 282761: Manufacturer part # 128-TEMP - For Arctic Cat, Polaris, Ski-Doo and Yamaha models with 128 in. track , Features patterns for 13.5 in., 14 in. and 15 in. wide tracks. Two 102-stud patterns: one for 102 Single Digger support plates, the other using 51 Double Digger support plates to develop a 102-stud pattern. Also features a pattern for 153 studs using Single and Double Digger support plates. All patterns are for the center belt. Modification needed to accommodate any supported track width will not change the scratch lines.. 128-TEMP 1 on Hand More Info/Options for Woodys Trail Studding Template 282761

$29.99 Woodys Triangle Digger Aluminum Support Plates 080541 Dennis Kirk Part #: 080541 Woodys Triangle Digger Aluminum Support Plates 080541: Manufacturer part # AWT-3725 - Race-tested support plates for competition use only. Proven winner with a unique shape that produces less rotating resistance which provides faster acceleration.. AWT-3725 1 on Hand More Info/Options for Woodys Triangle Digger Aluminum Support Plates 080541

$29.99 Woodys Triangle Digger Aluminum Support Plates 080542 Dennis Kirk Part #: 080542 Woodys Triangle Digger Aluminum Support Plates 080542: Manufacturer part # AWT-3775 - Race-tested support plates for competition use only. Proven winner with a unique shape that produces less rotating resistance which provides faster acceleration.. AWT-3775 10+ on hand More Info/Options for Woodys Triangle Digger Aluminum Support Plates 080542

$103.99 Woodys Ultra Series Carbide Wear Rods 031331 Dennis Kirk Part #: 031331 Woodys Ultra Series Carbide Wear Rods 031331: Manufacturer part # UAT-9750 - Carbide types prevent the rear of higher horsepower performance machines from pushing the front, especially on icy trails. Rears are angle-cut for easier unloading and backing up. Ten inches of 60 degree turning carbide. Hefty 5/8 in. diameter host rod and 3/8 in. studs. Sold in pairs. Fastening nuts included. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. UAT-9750