|
|
$13.99
Woodys Studding Template 282488
Dennis Kirk Part #: 282488
Woodys Studding Template 282488: Manufacturer part # FCSC-TEMP - Install the ideal stud pattern. Ensures your sled realizes maximum traction. Greatly reduces the chance of tunnel damage or clearance problems Made of 20 mil. styrene. , For 13.5 in. x 128 in. track or 13.5 in. x 144 in. track.. FCSC-TEMP
5 on Hand
More Info/Options for Woodys Studding Template 282488
|
|
|
|
$13.99
Woodys Super T-Nuts 08142
Dennis Kirk Part #: 08142
Woodys Super T-Nuts 08142: Manufacturer part # ATL-3810 - Heavy-duty 1" T-nuts are a must when installing .875" or longer studs. T-nuts work well with backer plates to help prevent stud pull-through on rubber tracks. Barrel Length .197 inch. 48-pack.. ATL-3810
2 on Hand
More Info/Options for Woodys Super T-Nuts 08142
|
|
|
|
$13.99
Woodys Super T-Nuts 08249
Dennis Kirk Part #: 08249
Woodys Super T-Nuts 08249: Manufacturer part # ATL-3820 - Heavy-duty 7mm thread and a 1 in.Diameter T-nuts are a must when installing .875" or longer studs. T-nuts work well with backer plates to help prevent stud pull-through on rubber tracks. Aluminum shim washers for 1/4" or 7mm studs measure 1/2" o.d. x .062" thick. Barrel Length of .236". 48-pack.. ATL-3820
1 on Hand
More Info/Options for Woodys Super T-Nuts 08249
|
|
|
|
$6.99
Woodys Super T-Nuts 08543
Dennis Kirk Part #: 08543
Woodys Super T-Nuts 08543: Manufacturer part # ATR-3750 - Heavy-duty 1" T-nuts are a must when installing .875" or longer studs. T-nuts work well with backer plates to help prevent stud pull-through on rubber tracks. Barrel Length .197 inch. Aluminum shim washers for 1/4" or 7mm studs measure 1/2" o.d. x .062" thick. 48-pack.. ATR-3750
2 on Hand
More Info/Options for Woodys Super T-Nuts 08543
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031358
Dennis Kirk Part #: 031358
Woodys Top-Stock Hard-Surfaced Wear Rods 031358: Manufacturer part # HSA-9750 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSA-9750
4 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031358
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031359
Dennis Kirk Part #: 031359
Woodys Top-Stock Hard-Surfaced Wear Rods 031359: Manufacturer part # HSD-8250 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSD-8250
1 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031359
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031360
Dennis Kirk Part #: 031360
Woodys Top-Stock Hard-Surfaced Wear Rods 031360: Manufacturer part # HSD-8150 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSD-8150
5 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031360
|
|
|
|
$19.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031363
Dennis Kirk Part #: 031363
Woodys Top-Stock Hard-Surfaced Wear Rods 031363: Manufacturer part # HSP-3180 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSP-3180
10+ on hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031363
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031381
Dennis Kirk Part #: 031381
Woodys Top-Stock Hard-Surfaced Wear Rods 031381: Manufacturer part # HSY-6550 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSY-6550
5 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031381
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031507
Dennis Kirk Part #: 031507
Woodys Top-Stock Hard-Surfaced Wear Rods 031507: Manufacturer part # HSC-5000 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSC-5000
6 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031507
|
|
|
|
$19.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031680
Dennis Kirk Part #: 031680
Woodys Top-Stock Hard-Surfaced Wear Rods 031680: Manufacturer part # HSD-9250 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSD-9250
3 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031680
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031682
Dennis Kirk Part #: 031682
Woodys Top-Stock Hard-Surfaced Wear Rods 031682: Manufacturer part # HSA-9850 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSA-9850
Expected Soon
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031682
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031683
Dennis Kirk Part #: 031683
Woodys Top-Stock Hard-Surfaced Wear Rods 031683: Manufacturer part # HSA-9975 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSA-9975
Expected Soon
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031683
|
|
|
|
$23.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031780
Dennis Kirk Part #: 031780
Woodys Top-Stock Hard-Surfaced Wear Rods 031780: Manufacturer part # HSY-6580 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSY-6580
8 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031780
|
|
|
|
$19.99
Woodys Top-Stock Hard-Surfaced Wear Rods 031921
Dennis Kirk Part #: 031921
Woodys Top-Stock Hard-Surfaced Wear Rods 031921: Manufacturer part # HSD-9450 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSD-9450
3 on Hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 031921
|
|
|
|
$22.99
Woodys Top-Stock Hard-Surfaced Wear Rods 032050
Dennis Kirk Part #: 032050
Woodys Top-Stock Hard-Surfaced Wear Rods 032050: Manufacturer part # HSP-1225 - New Top-Stock hardweld runner (no carbide) designed for extreme service. Features a 1/2 in. host bar with a full-length double pass of hardweld. All studs are long enough for ski skins. Sold in pairs. Fastening nuts included. NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing NOTE: The following models replaces OEM dual rods with one single rod per ski: 4-Stroke Touring 2003. Bearcat (all) 2003-05. Pantera 600/800 /EFI 2004-05. T660 (all) 2004-05.. HSP-1225
10+ on hand
More Info/Options for Woodys Top-Stock Hard-Surfaced Wear Rods 032050
|
|
|
|
|
|
|
|
|
|
|
|
$61.99
Woodys Trail Blazer IV Carbide Wear Rods 031233
Dennis Kirk Part #: 031233
Woodys Trail Blazer IV Carbide Wear Rods 031233: Manufacturer part # TAT4-6050 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-6050
4 on Hand
More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031233
|
|
|
|
$61.99
Woodys Trail Blazer IV Carbide Wear Rods 031234
Dennis Kirk Part #: 031234
Woodys Trail Blazer IV Carbide Wear Rods 031234: Manufacturer part # TAT4-7050 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-7050
6 on Hand
More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031234
|
|
|
|
$61.99
Woodys Trail Blazer IV Carbide Wear Rods 031235
Dennis Kirk Part #: 031235
Woodys Trail Blazer IV Carbide Wear Rods 031235: Manufacturer part # TAT4-9750 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TAT4-9750
10+ on hand
More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031235
|
|
|
|
$61.99
Woodys Trail Blazer IV Carbide Wear Rods 031236
Dennis Kirk Part #: 031236
Woodys Trail Blazer IV Carbide Wear Rods 031236: Manufacturer part # TSD4-6150 - For more powerful cornering performance on the trails. 6 in. of 60 degree center carbide with front and rear wear pads. Full-length hardweld between carbide inserts. 1/2 in. diameter host bar, 3/8 in. studs. , NOTE: , Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. TSD4-6150
Expected Soon
More Info/Options for Woodys Trail Blazer IV Carbide Wear Rods 031236
|
|
|
|
