TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Anti-Fog Dual Lens for Smith Goggles p373426

$265.99 Cheap Andrews TW21 Chain Driven Cam 216321 Manufacturer: Andrews Dennis Kirk Part #: 149900 Andrews TW21 Chain Driven Cam : Manufacturer part # 216321 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately). . , , TW21 Grind cams. Bolt-in with more torque at low and middle rpm range(1700-5200 rpm). Work well with either fuel injection or carburetor. Can be used with stock valve springs and tappets . , , NOTE: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used.. , , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance.. , , INTAKE: Opens: 10 degrees. Closes: 30 degrees. Duration @ .053: 220 degrees. Duration @ .020: 255 degrees. Valve Lift: .498. Lift TDC: .134. , EXHAUST: Opens: 40 degrees. Closes: 08 degrees. Duration @ .053: 228 degress. Duration @ .020: 264 degrees. Valve Lift: .498. Lift TDC: .121.. 216321 1 on hand More Info/Options for Andrews TW21 Chain Driven Cam 216321

$265.99 Cheap Andrews TW26A Grind Cam 216326 Manufacturer: Andrews Dennis Kirk Part #: 149901 Andrews TW26A Grind Cam : Manufacturer part # 216326 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW26A Grind Cams , , Bolt-in cams for low rpm torque and two-up touring. Add more torque and horsepower at low and middle rpm range (1800-5500 rpm). Works well with either fuel-injection or carburetor. Can be used with stock valve springs and tappets. , NOTE: 00-02 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used., , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance., , INTAKE: Opens: 11 degree. Closes: 35 degree. Duration @ .053: 226 degree. Duration @ .020: 262 degree. Valve Lift: .490. Lift TDC: .138. , EXHAUST: Opens: 41 degree. Closes: 09 degree. Duration @ .053: 230 degree. Duration @ .020: 266 degree. Valve Lift: .490. Lift TDC: .120.. 216326 1 on hand More Info/Options for Andrews TW26A Grind Cam 216326

$265.99 Cheap Andrews TW26A Grind Cam 288126 Manufacturer: Andrews Dennis Kirk Part #: H14179 Andrews TW26A Grind Cam : Manufacturer part # 288126 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW26A Grind Cams , , Bolt-in cams for low rpm torque and two-up touring. Add more torque and horsepower at low and middle rpm range (1800-5500 rpm). Works well with either fuel-injection or carburetor. Can be used with stock valve springs and tappets. , NOTE: 00-02 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used., , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance., , INTAKE: Opens: 11 degree. Closes: 35 degree. Duration @ .053: 226 degree. Duration @ .020: 262 degree. Valve Lift: .490. Lift TDC: .138. , EXHAUST: Opens: 41 degree. Closes: 09 degree. Duration @ .053: 230 degree. Duration @ .020: 266 degree. Valve Lift: .490. Lift TDC: .120.. 288126 1 on hand More Info/Options for Andrews TW26A Grind Cam 288126

$265.99 Cheap Andrews TW31S Chain Driven Cam 216331 Manufacturer: Andrews Dennis Kirk Part #: 149902 Andrews TW31S Chain Driven Cam : Manufacturer part # 216331 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW31S Grind Cams. Bolt-in cam for motors with 95 inches and 9.8 to 10.2 compression ratio. Lower TDC lift for easy installation. Similar to TW37 with different timing (2000-5600 rpm power range. Can be used with stock valve springs and tappets . , , NOTE: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used.. , , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance.. , , INTAKE: Opens: 10 degrees. Closes: 46 degrees. Duration @ .053: 236 degrees. Duration @ .020: 272 degrees. Valve Lift: .510. Lift TDC: .131. , EXHAUST: Opens: 52 degrees. Closes: 08 degrees. Duration @ .053: 240 degress. Duration @ .020: 276 degrees. Valve Lift: .510. Lift TDC: .120.. 216331 1 on hand More Info/Options for Andrews TW31S Chain Driven Cam 216331

$265.99 Cheap Andrews TW31S Chain Driven Cam 288131 Manufacturer: Andrews Dennis Kirk Part #: 149403 Andrews TW31S Chain Driven Cam : Manufacturer part # 288131 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW31S Grind Cams. Bolt-in cam for motors with 95 inches and 9.8 to 10.2 compression ratio. Lower TDC lift for easy installation. Similar to TW37 with different timing (2000-5600 rpm power range. Can be used with stock valve springs and tappets . , , NOTE: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used.. , , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance.. , , INTAKE: Opens: 10 degrees. Closes: 46 degrees. Duration @ .053: 236 degrees. Duration @ .020: 272 degrees. Valve Lift: .510. Lift TDC: .131. , EXHAUST: Opens: 52 degrees. Closes: 08 degrees. Duration @ .053: 240 degress. Duration @ .020: 276 degrees. Valve Lift: .510. Lift TDC: .120.. 288131 1 on hand More Info/Options for Andrews TW31S Chain Driven Cam 288131

$265.99 Cheap Andrews TW32H Grind Cam 216332 Manufacturer: Andrews Dennis Kirk Part #: 140153 Andrews TW32H Grind Cam : Manufacturer part # 216332 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW32H Grind Cams , , High lift version of 31H. Much more power throught rpm range with 10:1+ compression pistons (2800-5600 rpm). , , NOTE: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used., , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance., , INTAKE: Opens: 10 degree. Closes: 46 degree. Duration @ .053: 236 degree. Duration @ .020: 272 degree. Valve Lift: .510. Lift TDC: .131. , EXHAUST: Opens: 52 degree. Closes: 8egree. Duration @ .053: 240 degree. Duration @ .020: 276 degree. Valve Lift: .510. Lift TDC: .120.. 216332 1 on hand More Info/Options for Andrews TW32H Grind Cam 216332

$265.99 Cheap Andrews TW37B Grind Cam 216337 Manufacturer: Andrews Dennis Kirk Part #: 149903 Andrews TW37B Grind Cam: Manufacturer part # 216337 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW37B Grind Cams , , Bolt-in cams have shown 80+ rear-wheel horsepower. Smooth idle, broad torque band. Runs best with low restriction exhausts (2200-5800 rpm). Works well with either fuel-injection or carburetor. Can be used with stock valve springs and tappets. , NOTE: 00-02 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used., , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance., , INTAKE: Opens: 18 degree. Closes: 38 degree. Duration @ .053: 236 degree. Duration @ .020: 272 degree. Valve Lift: .510. Lift TDC: .174. , EXHAUST: Opens: 46 degree. Closes: 14 degree. Duration @ .053: 240 degree. Duration @ .020: 276 degree. Valve Lift: .510. Lift TDC: .140.. 216337 2 on hand More Info/Options for Andrews TW37B Grind Cam 216337

$265.99 Cheap Andrews TW37B Grind Cam 288137 Manufacturer: Andrews Dennis Kirk Part #: H14180 Andrews TW37B Grind Cam: Manufacturer part # 288137 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. , , TW37B Grind Cams , , Bolt-in cams have shown 80+ rear-wheel horsepower. Smooth idle, broad torque band. Runs best with low restriction exhausts (2200-5800 rpm). Works well with either fuel-injection or carburetor. Can be used with stock valve springs and tappets. , NOTE: 00-02 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam motor, but the splined cam drive sprocket OEM #25716-99 or H11-120 must be used., , NOTE: Installer must check coil bind, valve clearance and valve-to-piston clearance., , INTAKE: Opens: 18 degree. Closes: 38 degree. Duration @ .053: 236 degree. Duration @ .020: 272 degree. Valve Lift: .510. Lift TDC: .174. , EXHAUST: Opens: 46 degree. Closes: 14 degree. Duration @ .053: 240 degree. Duration @ .020: 276 degree. Valve Lift: .510. Lift TDC: .148.. 288137 2 on hand More Info/Options for Andrews TW37B Grind Cam 288137

$254.99 Cheap Andrews TW44 Chain Driven Grind Cam 216344 Manufacturer: Andrews Dennis Kirk Part #: 149904 Andrews TW44 Chain Driven Grind Cam: Manufacturer part # 216344 - Andrews Products grinds its cams using a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high-performance cams are installed. Cams come with new bearings (1 roller and 1 ball). Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately). , , TW44 Grind Cams Maximum torque and horsepower at middle and upper rpm range(2400-6000 rpms). Designed for engines with 9.5:1 compression ratio or higher and with 88-95in.. Work best with carburetor. Can be used with stock springs and tappets.. 216344 1 on hand More Info/Options for Andrews TW44 Chain Driven Grind Cam 216344

$254.99 Cheap Andrews TW50 Grind Cams 216350 Manufacturer: Andrews Dennis Kirk Part #: 149905 Andrews TW50 Grind Cams: Manufacturer part # 216350 - Andrews Products is recognized world wide and throughout the Motor Sports community as an industry leader.. Andrews Products grind its cams using computer-aided cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high- performance cams are installed. Cams come with new bearings (1 roller and 1 ball) and thrust washers. Andrews recommends using their steel cam drive sprocket H11-120 and crankshaft cam drive sprocket H14-175 (must be purchased separately).. Maximum torque and horsepower at higher rpm ranges. For lighter bikes and engines with 9.5 compression ratio (or higher) and 88-95 i n. (2600-600+ rpm). Can be used with stock valve springs and tappets. , , INTAKE: Opens: 20 degree. Closes: 48 degree. Duration @ .0523: 248 degree. Duration @ .020: 283 degree. Valve Lift: .510. Lift TDC: .184. , EXHAUST: Opens: 54 degree. Closes: 18 degree. Duration @ .053: 252 degree. Duration @ .020: 287 degree. Valve Lift: .510. Lift TDC: .168.. 216350 1 on hand More Info/Options for Andrews TW50 Grind Cams 216350

$254.99 Cheap Andrews TW55 Chain Driven Grind Cam 216355 Manufacturer: Andrews Dennis Kirk Part #: 149906 Andrews TW55 Chain Driven Grind Cam: Manufacturer part # 216355 - Andrews Products grinds its cams using a computer with cam design capabilities. This superior technology gives the utmost in both performance and reliability. Only the best alloy steel billets and heat-treating processes are used. The power in a Harley Twin Cam engine is completely released only when superior Andrews computer-designed high-performance cams are installed. Cams come with new bearings (1 roller and 1 ball). Andrews recommends using their steel cam drive sprocket DS-199175 and crankshaft cam drive sprocket DS-199074 (must be purchased separately). , , TW55 Grind Cams Maximum torque and horsepower at higher rpm ranges (2600-6000 rpms). Designed for engines with 9.5:1 compression ratio or higher and with 88-95in.. Coil bind should be checked - Can be used with stock tappets.. 216355 1 on hand More Info/Options for Andrews TW55 Chain Driven Grind Cam 216355

$232.99 Cheap Andrews Two-Gear Set for Gear-Driven Cams 288903 Manufacturer: Andrews Dennis Kirk Part #: H14082 Andrews Two-Gear Set for Gear-Driven Cams: Manufacturer part # 288903 - Sets will work with all Andrews and S&S gear-drived cams for Twin Cam motors. Two-gear set includes a pinion shaft gear and an outer cam gear. Set includes bolts, thrust washer and key. Made in the U.S.A... 288903 1 on hand More Info/Options for Andrews Two-Gear Set for Gear-Driven Cams 288903

$302.99 Cheap Andrews V-438 Cams for Polaris Freedom Models 268450 Manufacturer: Andrews Dennis Kirk Part #: 140246 Andrews V-438 Cams for Polaris Freedom Models: Manufacturer part # 268450 - Your Polaris engine has a lot of potential. With 92 cubic inches, 4valve heads and a 9.2 compression ratio, more performance isonly a pair of camshafts away.. The 438 makes a great setupwith a street bike with stock engine or a tuned engine with stockor larger displacement.. The 460 cams are a perfect match for the factory 100 kits.. , , NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance when installing cams.. , , V-438 GRIND CAMS , More valve lift and duration means extra power through the rpm range (2000-6000+) for bolt-in or modified engines. Piston-valve clearance should be checked; uses stock valve springs. , , V-460 GRIND CAMS , Higher lift cams for modified Freedom motors with big cylinders and higher compression ratio. More torque and hp with factory 100 kits; rpm range (2200-6500+). Uses high-lift valve springs.. 268450 1 on hand More Info/Options for Andrews V-438 Cams for Polaris Freedom Models 268450

$302.99 Cheap Andrews V-460 Cams for Polaris Freedom Models 268460 Manufacturer: Andrews Dennis Kirk Part #: 140247 Andrews V-460 Cams for Polaris Freedom Models: Manufacturer part # 268460 - Your Polaris engine has a lot of potential. With 92 cubic inches, 4valve heads and a 9.2 compression ratio, more performance isonly a pair of camshafts away.. The 438 makes a great setupwith a street bike with stock engine or a tuned engine with stockor larger displacement.. The 460 cams are a perfect match for the factory 100 kits.. , , NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance when installing cams.. , , V-438 GRIND CAMS , More valve lift and duration means extra power through the rpm range (2000-6000+) for bolt-in or modified engines. Piston-valve clearance should be checked; uses stock valve springs. , , V-460 GRIND CAMS , Higher lift cams for modified Freedom motors with big cylinders and higher compression ratio. More torque and hp with factory 100 kits; rpm range (2200-6500+). Uses high-lift valve springs.. 268460 1 on hand More Info/Options for Andrews