|
|
$80.99
Pingel Mono Strut 588373
Dennis Kirk Part #: 588373
Pingel Mono Strut 588373: Manufacturer part # MSKZX9R - 4130 chromoly struts are hand TIG-welded; replace the rear shock to help put your bike's power to the ground on the drag strip. Provide 1" of adjustment, longer or shorter.. MSKZX9R
1 on Hand
More Info/Options for Pingel Mono Strut 588373
|
|
|
|
$25.99
Pingel Mount Kit for Removable Wheel Chocks 55610
Dennis Kirk Part #: 55610
Pingel Mount Kit for Removable Wheel Chocks 55610: Manufacturer part # WCMD010 - Thick-wall steel tube wheel chocks feature a high-quality chrome finish and a mount that lets you remove them when they are not in use. Chocks are easily removed by unscrewing the T-bolt hold-down screw; mounting brackets remain fastened. Use chocks on more than one surface with additional mounting kits; available separately. Mounting brackets used with the wheel chock are patented. If it does not say (Pingel®,) it is not the real thing. This is not an imported product, as sold by other companies. Made in the U.S.A.. , NOTE:. T-Bolt hold-down screw cannot be used in trailers with steel or corrugated floors.. Wheel Chocks in not included in this kit.. Will not mount on part no. 40-358, 55-358 or WC55H. .. WCMD010
Expected Soon
More Info/Options for Pingel Mount Kit for Removable Wheel Chocks 55610
|
|
|
|
|
|
|
|
$80.99
Pingel Power Flo Dirt Valve 181563
Dennis Kirk Part #: 181563
Pingel Power Flo Dirt Valve 181563: Manufacturer part # 6190AH1 - Eliminates the stumble in long whooped-out sections, keeps the carburetor full of fuel at all times and assures consistent fuel mixture under all conditions. Machined from lightweight billet aluminum, not a cast piece like the stock petcock. Lighter than the stock petcock and uses stock mounting holes and hardware. , NOTE: Picture on the Far Right. 6190AH1
1 on Hand
More Info/Options for Pingel Power Flo Dirt Valve 181563
|
|
|
|
$78.99
Pingel Power Flo Dirt Valve 181565
Dennis Kirk Part #: 181565
Pingel Power Flo Dirt Valve 181565: Manufacturer part # 4111AH3 - Eliminates the stumble in long whooped-out sections, keeps the carburetor full of fuel at all times and assures consistent fuel mixture under all conditions. Machined from lightweight billet aluminum, not a cast piece like the stock petcock. Lighter than the stock petcock and uses stock mounting holes and hardware. , NOTE: Picture on the Far Right. 4111AH3
2 on Hand
More Info/Options for Pingel Power Flo Dirt Valve 181565
|
|
|
|
$69.99
Pingel Power Flo Dirt Valve 181566
Dennis Kirk Part #: 181566
Pingel Power Flo Dirt Valve 181566: Manufacturer part # 4110AH2 - Eliminates the stumble in long whooped-out sections, keeps the carburetor full of fuel at all times and assures consistent fuel mixture under all conditions. Machined from lightweight billet aluminum, not a cast piece like the stock petcock. Lighter than the stock petcock and uses stock mounting holes and hardware. , NOTE: Picture on the Far Right. 4110AH2
3 on Hand
More Info/Options for Pingel Power Flo Dirt Valve 181566
|
|
|
|
$80.99
Pingel Power Flo Dirt Valve 181567
Dennis Kirk Part #: 181567
Pingel Power Flo Dirt Valve 181567: Manufacturer part # 6190AH2 - Eliminates the stumble in long whooped-out sections, keeps the carburetor full of fuel at all times and assures consistent fuel mixture under all conditions. Machined from lightweight billet aluminum, not a cast piece like the stock petcock. Lighter than the stock petcock and uses stock mounting holes and hardware. , NOTE: Picture on the Far Right. 6190AH2
Expected Soon
More Info/Options for Pingel Power Flo Dirt Valve 181567
|
|
|
|
$89.99
Pingel Power Flo Dirt Valve 181570
Dennis Kirk Part #: 181570
Pingel Power Flo Dirt Valve 181570: Manufacturer part # 3110DAH4 - Dont let your stock petcock act as your carburetors main jet. Eliminates the stumble in long whooped-out sections, keeps your carburetors full of fuel at all times and assures consistent fuel mixture under all conditions. Machined from lightweight billet aluminum, not a cast piece like the stock petcock. Lighter than the stock petcock and uses stock mounting holes and hardware.. 3110DAH4
5 on Hand
More Info/Options for Pingel Power Flo Dirt Valve 181570
|
|
|
|
$79.99
Pingel Power Flo Dirt Valve 183932
Dennis Kirk Part #: 183932
Pingel Power Flo Dirt Valve 183932: Eliminates the stumble in long whooped-out sections, keeps the carburetor full of fuel at all times and assures consistent fuel mixture under all conditions. Machined from lightweight billet aluminum, not a cast piece like the stock petcock. Lighter than the stock petcock and uses stock mounting holes and hardware. , NOTE: Picture on the Far Right.
1 on Hand
More Info/Options for Pingel Power Flo Dirt Valve 183932
|
|
|
|
$101.99
Pingel Power-Flo Fuel Valve 1781762
Dennis Kirk Part #: 1781762
Pingel Power-Flo Fuel Valve 1781762: Manufacturer part # 4211CH6 - Single outlet. High performance fuel valves unequaled for over 20 years. Flow over 85 ounces of fuel per minute to satisfy the most thirsty motor. Some models will require an adapter plate (available separately). The appearance of these valves is a trademark of Pingel Enterprises, Inc.. Made in the USA. NOTE: Pingel fuel delivery systems are covered under one or more of the following patents. 4.957138. D330,712. D363-533. D363-762. D408-069. D408-500. D408-894. D409-724. D410-434. M9505991.1. M9502099.3. Other patents and/or trademarks: Power-Flo, Pass More Gas, The Guzzler, NV1, Pingel.. 4211CH6
2 on Hand
More Info/Options for Pingel Power-Flo Fuel Valve 1781762
|
|
|
|
$94.99
Pingel Power-Flo Fuel Valve 181574
Dennis Kirk Part #: 181574
Pingel Power-Flo Fuel Valve 181574: Manufacturer part # 32GSXRDAH - Dual outlet. High performance fuel valves unequaled for over 20 years. Flow over 85 ounces of fuel per minute to satisfy the most thirsty motor. Some models will require an adapter plate (available separately). The appearance of these valves is a trademark of Pingel Enterprises, Inc.. Made in the USA. NOTE: Adapter plate 181577 required for GSX-R750 86-95 and GSX-R1100 86-98. Adapter plate 181575 required for GSX-R750 96-98. Pingel fuel delivery systems are covered under one or more of the following patents. 4.957138. D330,712. D363-533. D363-762. D408-069. D408-500. D408-894. D409-724. D410-434. M9505991.1. M9502099.3. Other patents and/or trademarks: Power-Flo, Pass More Gas, The Guzzler, NV1, Pingel.. 32GSXRDAH
5 on Hand
More Info/Options for Pingel Power-Flo Fuel Valve 181574
|
|
|
|
$69.99
Pingel Race Valve 183566
Dennis Kirk Part #: 183566
Pingel Race Valve 183566: Provide maximum fuel for the fire -- test results have proven as much as twice the fuel flow over stock petcocks. Won't restrict fuel flow to the carb. Eliminate the stumble in long whooped-out sections. Keep the carburetor full of fuel at all times. Ensure consistent fuel mixture under all conditions. Machined from lightweight billet aluminum; not a cast piece like the OEM petcock. Lighter than the stock petcock. Use stock mounting holes and hardware..
1 on Hand
More Info/Options for Pingel Race Valve 183566
|
|
|
|
$45.99
Pingel Rear Pulley Spacer 805218
Dennis Kirk Part #: 805218
Pingel Rear Pulley Spacer 805218: Manufacturer part # 62051 - Easy-to-install .200 in. aluminum spacer fits between the rear wheel and the rear belt pulley and allows installation of tires up to 142mm wide without any other modification. Lets you install the 142mm Dunlop tire that is standard on FLH 04-05 models. Made in the U.S.A... 62051
Expected Soon
More Info/Options for Pingel Rear Pulley Spacer 805218
|
|
|
|
$64.99
Pingel Removable Wheel Chock 514481
Dennis Kirk Part #: 514481
Pingel Removable Wheel Chock 514481: Manufacturer part # WC650 - Thick-wall steel tube wheel chocks feature a high-quality chrome finish and a mount that lets you remove them when they're not in use. Chocks are easily removed by unscrewing the T-bolt hold-down screw; mounting brackets remain fastened. Use chocks on more than one surface with additional mounting kits; available separately. 6 1/2 in. W wheel chock features a three-bend radius to help clear the large brake rotors on sport bikes, while keeping the front wheel centered. Mounting brackets used with the wheel chock are patented. If it doesn't say ""Pingel"" it isn't the real thing. This is not an imported product. Made in the U.S.A.. T-Bolt hold-down screw cannot be used in trailers with steel or corrugated floors.. WC650
10+ on hand
More Info/Options for Pingel Removable Wheel Chock 514481
|
|
|
|
$64.99
Pingel Removable Wheel Chock 55606
Dennis Kirk Part #: 55606
Pingel Removable Wheel Chock 55606: Manufacturer part # WC350 - Thick-wall steel tube wheel chocks feature a high-quality chrome finish and a mount that lets you remove them when they're not in use. Chocks are easily removed by unscrewing the T-bolt hold-down screw; mounting brackets remain fastened. Use chocks on more than one surface with additional mounting kits; available separately. 6 1/2 in. W wheel chock features a three-bend radius to help clear the large brake rotors on sport bikes, while keeping the front wheel centered. Mounting brackets used with the wheel chock are patented. If it doesn't say ""Pingel"" it isn't the real thing. This is not an imported product. Made in the U.S.A.. T-Bolt hold-down screw cannot be used in trailers with steel or corrugated floors.. WC350
10+ on hand
More Info/Options for Pingel Removable Wheel Chock 55606
|
|
|
|
$107.99
Pingel Removable Wheel Chock for Corrugated Floors 514483
Dennis Kirk Part #: 514483
Pingel Removable Wheel Chock for Corrugated Floors 514483: Manufacturer part # WC651TBM - Pingel removable wheel chocks with a unique mounting bracket that fastens to the corrugated floors of pickups and vans. Chock features thick-wall steel tube construction with a high-quality chrome finish; removes easily when not in use. If it doesnt say Pingel it isnt the real thing. Mounting brackets used with wheel chocks are patented. Order DK part no. 55355 for Replacement mount for corrugated floors. Made in the U.S.A... WC651TBM
2 on Hand
More Info/Options for Pingel Removable Wheel Chock for Corrugated Floors 514483
|
|
|
|
$107.99
Pingel Removable Wheel Chock for Corrugated Floors 55354
Dennis Kirk Part #: 55354
Pingel Removable Wheel Chock for Corrugated Floors 55354: Manufacturer part # WC35TBM - Pingel removable wheel chocks with a unique mounting bracket that fastens to the corrugated floors of pickups and vans. Chock features thick-wall steel tube construction with a high-quality chrome finish; removes easily when not in use. If it doesnt say Pingel it isnt the real thing. Mounting brackets used with wheel chocks are patented. Order DK part no. 55355 for Replacement mount for corrugated floors. Made in the U.S.A... WC35TBM
3 on Hand
More Info/Options for Pingel Removable Wheel Chock for Corrugated Floors 55354
|
|
|
|
|
|
|
|
$37.99
Pingel Reservoir Cap 1901081
Dennis Kirk Part #: 1901081
Pingel Reservoir Cap 1901081: Manufacturer part # 62170 - CNC-machined from billet aluminum and highly polished. Some models fit more than one brand. Design features a clean appearance without logos for a smooth, custom look. Polished stainless steel screws included where applicable. Sold each.. 62170
1 on Hand
More Info/Options for Pingel Reservoir Cap 1901081
|
|
|
|
$37.99
Pingel Reservoir Cap 1901082
Dennis Kirk Part #: 1901082
Pingel Reservoir Cap 1901082: Manufacturer part # 62171 - CNC-machined from billet aluminum and highly polished. Some models fit more than one brand. Design features a clean appearance without logos for a smooth, custom look. Polished stainless steel screws included where applicable. Sold each.. 62171
3 on Hand
More Info/Options for Pingel Reservoir Cap 1901082
|
|
|
|
$37.99
Pingel Reservoir Cap 1901083
Dennis Kirk Part #: 1901083
Pingel Reservoir Cap 1901083: Manufacturer part # 62172 - CNC-machined from billet aluminum and highly polished. Some models fit more than one brand. Design features a clean appearance without logos for a smooth, custom look. Polished stainless steel screws included where applicable. Sold each.. 62172
4 on Hand
More Info/Options for Pingel Reservoir Cap 1901083
|
|
|
|
$37.99
Pingel Reservoir Cap 1901084
Dennis Kirk Part #: 1901084
Pingel Reservoir Cap 1901084: Manufacturer part # 62173 - CNC-machined from billet aluminum and highly polished. Some models fit more than one brand. Design features a clean appearance without logos for a smooth, custom look. Polished stainless steel screws included where applicable. Sold each.. 62173
3 on Hand
More Info/Options for Pingel Reservoir Cap 1901084
|
|
|
|
