|
|
$284.99
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. M Pipes
Dennis Kirk Part #: 4402305
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. M Pipes: Manufacturer part # PHD-160 SD - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-out tip. 86-87 models require brake pedal stop PART NO. 27-359. , , NOTE: Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-160 SD
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. M Pipes
|
|
|
|
$344.99
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. M Pipes
Dennis Kirk Part #: 4402315
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. M Pipes: Manufacturer part # PHD-136 SD - Chrome-plated finish with 2 1/2" muffler bodies and all-steel muffler cores. Rear pipe is a slip-fit and attaches to the OEM hanger bracket. Front pipe is one-piece and mounting hardware is included. 1 3/4" pipes reuse OEM heat shields (unless noted). Slash-out tip. Made in the USA. , , NOTE: Baffles are removable on Slash-cut systems only., , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-136 SD
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. M Pipes
|
|
|
|
$317.99
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. Shotgun-Style M Pipes
Dennis Kirk Part #: 4402323
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. Shotgun-Style M Pipes: Manufacturer part # PHD-142 SS - Made from one continuous piece of nickel-chrome finished 16-gauge tubing for traditional good looks. Feature 2 1/2" muffler bodies with removable baffles (except tapered style). O2 sensor bungs for 07-08 models are included. Original factory heat shields are retained. 1 3/4" pipes include mounting brackets and removable steel baffles. Slash-out tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-142 SS
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. Shotgun-Style M Pipes
|
|
|
|
$317.99
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. Shotgun-Style M Pipes
Dennis Kirk Part #: 4402324
Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. Shotgun-Style M Pipes: Manufacturer part # PHD-142 SD - Made from one continuous piece of nickel-chrome finished 16-gauge tubing for traditional good looks. Feature 2 1/2" muffler bodies with removable baffles (except tapered style). O2 sensor bungs for 07-08 models are included. Original factory heat shields are retained. 1 3/4" pipes include mounting brackets and removable steel baffles. Slash-out tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-142 SD
2 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 1 3/4 in. Shotgun-Style M Pipes
|
|
|
|
$419.99
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
Dennis Kirk Part #: 4402318
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes: Manufacturer part # PHD-236 SS - Chrome-plated finish with 2 1/2" muffler bodies and all-steel muffler cores. Rear pipe is a slip-fit and attaches to the OEM hanger bracket. Front pipe is one-piece and mounting hardware is included. 2" pipes feature a stepped header design for increased performance when used on big-inch motors. 2" pipes come with heat shields. Slash-out tip. Made in the USA. , , NOTE: Baffles are removable on Slash-cut systems only., , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-236 SS
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
|
|
|
|
$436.99
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
Dennis Kirk Part #: 4402308
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes: Manufacturer part # PHD-260 SS - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-out tip. 86-87 models require brake pedal stop PART NO. 27-359. , , NOTE: Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-260 SS
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
|
|
|
|
$349.99
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
Dennis Kirk Part #: 4402298
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes: Manufacturer part # PHD-235 SS - Traditional style chrome "M" pipes are made of one continuous piece of 16-gauge tubing. All pipes have 2 1/2" muffler bodies and come with removable baffles (except tapered and turn-out styles). 2" pipes feature a stepped header design for increased performance when used on big-inch motors. 2" pipes accept Cycle Shack heat shields only. Come complete with all necessary mounting hardware; gaskets not included. Slash-out tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... PHD-235 SS
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
|
|
|
|
$436.99
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
Dennis Kirk Part #: 4402309
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes: Manufacturer part # PHD-260 SD - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-out tip. 86-87 models require brake pedal stop PART NO. 27-359. , , NOTE: Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD-260 SD
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
|
|
|
|
$349.99
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
Dennis Kirk Part #: 4402299
Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes: Manufacturer part # PHD-235 SD - Traditional style chrome "M" pipes are made of one continuous piece of 16-gauge tubing. All pipes have 2 1/2" muffler bodies and come with removable baffles (except tapered and turn-out styles). 2" pipes feature a stepped header design for increased performance when used on big-inch motors. 2" pipes accept Cycle Shack heat shields only. Come complete with all necessary mounting hardware; gaskets not included. Slash-out tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... PHD-235 SD
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Cycle Shack 2 in. M Pipes
|
|
|
|
$474.99
Bologna/Slash-Cut Tip LA Choppers 187 Exhaust System
Dennis Kirk Part #: 4402586
Bologna/Slash-Cut Tip LA Choppers 187 Exhaust System : Manufacturer part # 187 Softail Exha - Chopper pipes with custom stepped design (1 3/4 in. steps out to 2 1/4 in.). Hand-polished chrome finish. Runs cooler and adds horsepower. Mounting kit included: features a billet chrome transmission plate and necessary mounting hardware. Optional StackeDD exhaust tips available for 187 Straight-cut exhaust systems and are sold separately. Include heat shields and baffles. Include mounts for O2 sensors. Sold in pairs. Handcrafted in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models.. 187 Softail Exha
3 on Hand
More Info/Options for Bologna/Slash-Cut Tip LA Choppers 187 Exhaust System
|
|
|
|
$436.99
Bologna/Slash-Cut Tip Samson Rolled Thunder Miter-Cut Mufflers
Dennis Kirk Part #: H251426
Bologna/Slash-Cut Tip Samson Rolled Thunder Miter-Cut Mufflers: Manufacturer part # M-142 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. INCLUDED ITEMS: Two mufflers. Four 5/16 in.-18 x ¾ in. hex head bolts. Four 5/16 in. lock washers. One instruction sheet. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. M-142
1 on Hand
More Info/Options for Bologna/Slash-Cut Tip Samson Rolled Thunder Miter-Cut Mufflers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
